JZ-TS40 BabbyStepping about jz-ts24-2

[ffnull]

Project abadoned? no support at all?

[miblooming]

Sorry, I am not familiar with babbystepping. I am learning about this iusse.

[ffnull]

So? Any solution? http://marlinfw.org/docs/gcode/M290.html

[miblooming]

Three methods：
1.Add some codes in Gcode file by modifing the setting "Starting G-Code" of slicer software
2.Add a button on screen by UIEditor to trigger G290-operation by handwork
https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5%264.0)
https://www.youtube.com/playlist?list=PLamn4I4Ptg5KcN8KiLsWBeAiS-ABRkXjR
3.Add an event operation of by UIEditor

[ffnull]

I need add it to main screen of printing process. Button must be near buttons of corrections of temperatures of heaters. on center of button must be shown real height of Z and it must be change while clicking up and down

[ffnull]

Here another example how its work https://youtu.be/s5kld8MIo6M

[miblooming]

Please try it on UIEditor.
https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5%264.0)
https://www.youtube.com/playlist?list=PLamn4I4Ptg5KcN8KiLsWBeAiS-ABRkXjR

[ffnull]

by the way. no sizes and no models for jz-ts40.

[miblooming]

The firmware of jz-ts40 is same as jz-ts35

[RV3Dtech]

for Example:

[miblooming]

by the way. no sizes and no models for jz-ts40.
Here:@ffnull
https://github.com/miblooming/JZ-TS24-2/blob/master/size_shell/JZ-TS40_4.0shellV1.0-solidworks2016.zip