mightyhorst / fabfi Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/fabfi
Automatically exported from code.google.com/p/fabfi
With links running in the red zone (< -75dBm), STA will frequently disconnect
and not come back. running wifi on the AP seems to fix, but a permanent fix is
needed.
Suggested test: switch to ADHOC
Original issue reported on code.google.com by [email protected]
on 28 Feb 2011 at 12:29
some might call this a feature, but if you're logged in as a LAN client, you
can't directly access anything on 10.0.0.0/8 (am assuming default GW is
excepted from this since the system works...
Original issue reported on code.google.com by [email protected]
on 1 Mar 2011 at 10:02
I'm not sure Exactly how to reproduce this, but here's the setup I'm seeing a
problem with:
I have a headnode with a wireless WAN. The IP and DNS settings for this node
are static.
When there are multiple headnodes on the net, OLSR completely overwrites
/var/resolv.conf.auto with the remote DNS servers. The EXPECTED behavior is
that olsr then runs dnsmasq and the locally defined DNS should be appended.
This doesn't work.
The problem is fixed in real time by running /etc/init.d/network restart
maybe this should run every time OLSR updates DNS? Seems like doing surgery
with a sledgehammer.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2011 at 3:01
the setup script sets the wlan to 1 in the chilli config for pico2M when
selecting Client AP mode. It should be wlan0
Original issue reported on code.google.com by [email protected]
on 4 Feb 2011 at 3:11
To Reproduce:
1. browse to the network map using the aliased url map.mesh
The browser will pop up a message about the map needing a new key, but it still
seems to work.
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 6:46
Backfire seems to have cleaned up time syncing so that some of our manual hacks
with rdate may no longer be needed, though they don't seem to be interfering
now. Should investigate what the minimum config is.
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 12:15
If a Picostation is on and loses its route to the net (radius server?) it will
begin blinking the topmost LED and will not associate clients until the route
returns. Assume this is a symptom of chilli, Since we don't have any resources
that would e available when there's no route to the radius server, we're ok
with this issue for now.
to reproduce:
1. start up the device with no route to net OR
2. start up with route to net and then remove that route
when route not available, LED will blink and it will not associate clients.
Original issue reported on code.google.com by [email protected]
on 24 Jan 2011 at 7:15
map.mesh should be configured to the cloudIP by the startup script, but is
configured to the local IP instead.
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 9:13
cache size on squid is statically set to 5000GB, for larger flash drives' it
would be good to be able to select this dynamically
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 9:09
while developing failover functionality for headnodes, I noticed that when the
default route switches (maybe just when the interface switches), chilli locks
up and needs to be restarted
Original issue reported on code.google.com by [email protected]
on 23 Apr 2011 at 11:49
currently, nodes with gateways do not advertise HNA for the networks they're
connected to. it's a good idea for this to not be automatic in the case of most
local networks, but if a node has a global IP, it's better for traffic to
traverse the mesh than to go to the public internet.
A useful enhancement would be to have gateways automatically advertise the
public networks they use as HNA.
Original issue reported on code.google.com by [email protected]
on 2 Mar 2011 at 10:02
This is not a bug , rather a feature i am asking about.
I just started working for some small project of mine.
I was able to do some olsr testing with some 20 EUR routers with openwrt.
Since your platform is so well maintained i was loking into it.
I tried to build image for a different Ar 7xx chipsets and after compiling your
trunk i realized that the images generated are limited to Ubiquti .
There are several other router running openwrt nicely they are cheap and are
based on atheros chipset, why is that you cannot build for different platforms
. It would be nice for the community if one could build for every 7xx platform
that openwrt supports.
For instance I am playing with TPlink 741ND . It works well but i cannot use
fabfi even the chipsets are close to nanaostation.
The only reason i was not using picostation is that the regulation here does
not allow more than 100mW RF output end even we are developing country no one
likes to mess up with the allready crowded spectrum.
Besides that this router si small works fine with openwrt (75 mbps N 20 Mhz)
and is dirt cheap 20 EUR / 25 USD .
Is there any script to build different platforms ? Did anybody try that .
If there is such project i am willing to test , i have serial port hooked to my
router so I am relatively safe.
Thank you.
Original issue reported on code.google.com by [email protected]
on 6 Jun 2012 at 5:48
Add option for configuring admin wlan in fabfi setup for headnode (wrt160nl)
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 7:44
When a headnode is configured with STA on the radio, the adhocmesh entry is
left without an interface. This may break VLAN config, and should be
investigated.
even if it doesn't break VLAN, extra sections should be removed from network
file
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 9:18
What steps will reproduce the problem?
1. try to create a headnode, configuring squid for the first time
2. umount will always fail (ok) but only sometimes hang (not ok)
you have to restart the setup script and then it generally works
Original issue reported on code.google.com by [email protected]
on 24 Jan 2011 at 5:46
we get in invalid argument error when formatting the disk during startup,
sometimes it hangs, sometimes it doesn't. it's possible that if you're
inserting the drive during the setup you need to be sure to wait until it's
fully recognised by the OS
Original issue reported on code.google.com by [email protected]
on 25 Jan 2011 at 9:05
As expected the check-uplink script incorrectly handles the case where the net
is available but ping fails. This can be corrected by adding:
echo "`date` trying wget as a backup" >> $LG
wget -s http://master.mesh
if [ $? -eq 0 ]
then
echo "`date` w-got master.mesh" >> $LG
set_server
exit 0
fi
but the olsrd_dyn_gw plugin had to be nastily hacked to check the local
address, which breaks truly dynamic gateways
Original issue reported on code.google.com by [email protected]
on 16 Feb 2011 at 4:37
openwrt doesn't build nagios-plugins out of the box in 25475 because it doesn't
show correctly in menuconfig. You have to manually add libpq and
nagios-plugins in the .config file. Note version has changed:
https://dev.openwrt.org/changeset/17923/packages/net/nagios-plugins/Makefile
It seems that selecting coreutils-su fixes.
Added as a bug here because it seems like there are all of a sudden a lot of
dependencies. Not sure in nagios-pplugins will work in this version
builds from r244 will have the new version
Original issue reported on code.google.com by [email protected]
on 28 Feb 2011 at 1:07
Not sure how to reproduce, but sometimes the date sits in 1970 forever on Mt.
View HN. must test with new build of headnode
Original issue reported on code.google.com by [email protected]
on 8 Feb 2011 at 8:53
Running squid on the headnode causes it to reboot frequently. Suspect
insufficient memory to start a new process, so cron jobs are bouncing the
device. Disabling squid fixes. Maybe need swap?
Original issue reported on code.google.com by [email protected]
on 4 Feb 2011 at 3:13
Entering decimal GPS coordinates (ex -.75, 36.5) causes updates to fail on
server side. all decimal GPS coordinates needs to be entered as 0.xxx
Original issue reported on code.google.com by [email protected]
on 15 Feb 2011 at 8:31
Configure headnode and map.mesh is defined in /etc/config/dhcp as nodeIP not
cloudIP. Could be old config file? was unable to find the location of the
problem in setup script or source files.
Can be manually fixed by editing config (i think)
Original issue reported on code.google.com by [email protected]
on 24 Jan 2011 at 9:29
What steps will reproduce the problem?
1. set up a headnode where DNS for master.mesh and radius.mesh are not the same
2. set up a second node with chilli running
You will see the splash page but the login will not complete
Note: this is not entirely verified. Could have been a reboot / dns caching
issue.
Original issue reported on code.google.com by [email protected]
on 8 Feb 2011 at 8:22
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.