mlab-modules Goto Github PK

.github

3phbridge01

4xlto1865v01

4xlto1865v02

acomp01

Fast analog comparator module

ad1881a01

Module is audio in and audio out interface for development board NGW100 with processor ATMEL AVR32. It uses common codec AD1881A.

adcaudio01

Audio to digital converter ADCaudio01B Module has audio input interface. Digitalized audio data stream (I2S) with parametrers 192kHz@24bit.

adcdual01

Two-channel 16-bit A/D converter with differential input and serial LVDS output. The underlying chip is LTC2271 by Linear Technology. Between the module input and the converter, two LT6600 amplifiers are inserted.

adcmonoppi01

Mono high speed analog to digital converter. With parallel data output.

adcmonospi01

Mono high resolution analog to digital converter. With serial data output.

adcoctospi01

Octal input high-speed ADC with LVDS parallel output.

albase0401

This base board has size 4x1 holes and standard MLAB grid 400mils (10.16mm). It is especially suited for simple measuring instruments and mobile robots constructions.

albase1115

This base board has size 11x15 holes and standard MLAB grid 400mils (10.16mm). It is especially suited for simple measuring instruments and mobile robots constructions.

albase1208

This base board has size 12x08 holes and standard MLAB grid 400mils (10.16mm). It is especially suited for simple measuring instruments and mobile robots constructions.

albase1209

This base board has size 12x09 holes and standard MLAB grid 400mils (10.16mm). It is especially suited for simple measuring instruments and mobile robots constructions.

albase1241

This base board has size 12x41 holes and standard MLAB grid 400mils (10.16mm). It is especially suited for simple measuring instruments and mobile robots constructions.

albase1505

Motherboard ALBASE1505 has 15x5 holes with a spacing of 10.16 mm. Its overall dimensions are adapted for insertion into the box UNIBOX03A.

albase1521

MLAB base-board with size 15x21 holes with standard MLAB grid 400mils (10.16mm). The board on the sides contains a series of M3 holes with a metric pitch (10 mm) and three holes for stacking the boards above each other.

albase1521b

MLAB base-board with size 15x21 holes with standard MLAB grid 400mils (10.16mm)

albase1608

This base board has size 16x08 holes and standard MLAB grid 400mils (10.16mm)

albase1609

MLAB aluminium baseboard with 16x9 holes with a standard pitch of 400mils (10.16mm). Suitable for devices placed in the 1455N1601 box.

albase2537

This base board has size 25x37 holes and standard MLAB grid 400mils (10.16mm). It is especially suited for simple measuring instruments and mobile robots constructions.

altimet01

Precision barometric sensor. Board is designed for MPL115A1 or MPL115A2 integrated sensor chips.

altimet02

High-accuracy barometric pressure and temperature sensing module with MS561101BA03.

amux01

Four channel analog multiplexer with single-sided output

ant01

Module contain a ANT transceiver and SMA antenna conector. Module has serial interface for direct connection to microcontroller.

at32tq14401

Module is intended for development of applications based on powerful 32bit Atmel microcontrolers with AVR32 core AT32UC3A series.

atmega801

Processor module for ATMEL ATmega8 in TQFP32 package. The module contains processor and standard crystal or clock crystal can be used. There is RESET push button and ATMEL ISP 6 PIN connector.

atmega8dil01

Processor module for ATMEL ATmega8 in DIL28 package. The module contains processor and standard crystal or clock crystal can be used. There is RESET push button and ATMEL ISP 6 PIN connector.

atmegatq10001

Processor module for ATMEL ATmega in TQFP100 package. The module can use standard and/or clock crystals. It is equipped with RESET push button and programming connector for ISP (6PIN) and JTAG (10PIN) programming.