moemengaber / gigabyte_b660m_hackintosh

Opencore files for Gigabyte B660M

Hardware:

• CPU: Intel Core i5 12400
• RAM: Crucial 32GB 3200 DDR4 (Kit of 2)
• Motherboard: Gigabyte B660M DS3H AX DDR4
• GPU: Sapphire Radeon RX 480 8GB
• SSD: Crucial P3 SSD NVME
• Wifi/Bluetooth: Intel® Wi-Fi AX211 / Intel Bluetooth 5.2
• Case / PSU: Case XIGMATEK Master X GAMING
  Power Supply 600W 80+ Elite V4

Bootloader:

PS: These Opencore files are signed via Windows WSL, this will enable you to boot OpenCore while Secure boot option is active in your Motherboard, You don't need to do anything, just enable the option and boot!

Opencore 1.0.0 — iMacPro1,1

---

Installation Steps:

All the required steps are from the official open core guide, please follow it if you need to get the best results, these files only to help you as a simple guide, please use your own if you faced any issues or you have any other hardware.

Bios Settings

Disable:

• Fast Boot
• CSM
• Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
• Intel SGX
• Disable Internal Graphics (Not Supported)

Enable:

• VT-x
• Hyper-Threading
• Execute Disable Bit
• OS type: (Windows 10 Feautres: Ohter)

Needed Drivers:

OpenCanCopy

OpenHfsPlus

OpenRuntime

ResetNvramEntry

Kexts:

AppleALC

BlueToolFixup

CPUFriend

CpuTscSync

HibernationFixup

IntelBluetoothFirmware

IntelBTPatcher

itlwm

Lilu

NVMeFix

RadeonSensor

RestrictEvents

SMCProcessor

SMCRadeonGPU

SMCSuperIO

USBToolBox

UTBDefault

VirtualSMC

WhateverGreen

---

All of these steps are identical to Opencore Comet lake, but with some modifications, you should get the same ACPI files and it's included on my repo, it's generic not related to my CPU or manually generated, you can generate your own BTW.