GithubHelp home page GithubHelp logo

com.moz.denon's People

Contributors

murderbeard avatar

Stargazers

 avatar  avatar  avatar

Watchers

 avatar  avatar

com.moz.denon's Issues

Devise control

Hi,
Is there a way of implementing control of zone 2 with buttons under devise instead of Flows? Zone 2on/off, zone 2 volume up/down?

Add CD to DENON AVR

Hi Ralph

Excellent app, works fine with my DENON X4400H on main channels. It's a shame the CD channel is missing in the Cards. Is this easy to add?

Thanks

Marcel

Support New Denon AVR

Hi Murderbeard/Ralph

Can you add support for Denon AVR-X2400H?
This is a 'new' model that not support telnet but http on port 8080.
I Search some info and i found this:

ol-iver/denonavr#32

The commands power/volume works for me.

Want you give it a try?

Thanks in advanced.

Greetz Jaap-Jan

When AVR is manually powered on/off the power state tag is not updated

Hi Ralph,

Kind of a feature request, not a real issue ...

I noticed that the power state tag is only changed when the AVR power state has been set by Homey (e.g. a flow). My AVR is powered on/off manually directly most of the times by my family that does not update the tag in Homey. Is it possible that Homey gets notified of a power change or a changed channel when this is done manually on the AVR that updates tags? Depending on power state of the zones (main, zone2, zone3) or set channels better flow conditions can be used for advanced scenarios.

Regards,
Jeroen

AVR-3808 power toggle

If I use the Homey power button toggle to turn off my AVR-3808 I cannot turn it back on.

I get an error message in the red banner of the Homey app saying it could no longer make a connection to the Denon amp on the specified IP address.

Is there any way to debug this app further regarding connection attempts and commands being sent?

Migrating to SDK3 and Marantz support

Hi!

I'm having a question. As Homey Pro 2023 will only support SDK3 apps, I am wondering if you will update your app to this new standard.

Athom says that it is really simple to upgrade apps from SDK2 to SDK3, so I hope you will. ๐Ÿค—

I am using a Marantz receiver, and had some contact with the developer of the Marantz app for Homey. He stopped using Homey so that app is not supported anymore.

However, I tried your app and it is working the same. So, Marantz is also supported by your app. Maybe you can rename your app to Denon/Marantz. This may be lead to a bigger install base for your app. ๐Ÿ‘๐Ÿป

Cheers en best regards,
Marcel

Report if device is unavailable

I have come across a situation where the device reported to be OFF, while in reality the device had disconnected from the network. Would it be possible to have a trigger or a condition to check if a device is actually connected available on the network?

Denon AVR-X3500H confirmed, with issues

The app seems to work with AVR-X3500H (i.e. I'm able to connect, turn on/off etc).

However, I'd like to create a flow based on on/off triggers from the Denon and the app seems to lose connection with equipment. If the app is restarted the connection is reset and correct status from the device is reported again.

Denon AVR-1600h - can't set source and volume for Z2

Hello,

I have in bar two receivers denon.
Denon AVR-1700h - Z2 change source and volume via custom commands works perfectly.
Denon AVR-1600h - Z2 change source and volume doesn't work. Can you advice? I use the same commands as for AVR-1700h. Only custom command Z2ON works for Denon AVR-1600h.

App stopped working

Really not sure where the problem is yet, but Homey Pro 2019 no longer can communicate with my Denon 4500H. Seems like the requests are timing out. I can access the web interface for Denon and the IP is the same like configured in Homey for the app.
What is the best way to debug?

main page Volume Button

loving the app but there is one thing i really hate; the main page shows the volume which is fine but when you press the "+" button it instantly jumps to 100%. I literally almost blew up my speakers and became deaf. As you can understand this is a pretty dangerous button.

Was wondering if you could either remove this option or make it jump like 5% at a time rather than setting the volume to 100%?

Thanks and keep up the great app!

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.