active_power_limit about solaredge_modbus

[Jusufs]

If you set for example this F001 parameter to 1%, actually power drops to 1% of nominal photovoltaic power value.
If you can not supply back to grid, according value to zero grid feeding you can dynamically reduce power.
Similar on Fronius inverter with native smart meter.

[herbi3]

I wouldn't recommend to adjust the power setting, but to instead adjust the export limit via modbus instead.

Adjusting the export control limit option is more accurate in terms of wattage and the inverters do their magic.

Changing the active power percentage, will adjust the output of the inverter to whatever you set it to, which can cause your household to begin pulling from the grid if you set it too low.

[PeterVermaas]

Agree with herbi3 that it's better to let the inverter do this work but then the inverter should have some metering.
Is there an example available about how to implement writing this F001 or similar registers like export limit? I don't see a possibility to write registers in this solaredge_modbus-package at this moment.