CooliPi 4B with fan on about stressberry

[CooliPi]

I've also found out differences in temperature with different RPI firmwares. The latest one slashes some more degrees of temperature. So I suggest you also collect the firmware version. Not sure how many Celsius degrees of temperature can it slash yet with a fan on. This submitted performance log was collected using the a previous firmware (than the latest).

[nschloe]

Thanks added those to the readme.

Added an issue for the firmware version. #52

the length of the test (5 minutes ?) is way too short.

It's good enough for the comparison between cases. I might extend it in the future though.

I also miss ambient temperature, because you can't make a fair comparison if you don't know it.

The raspberry doesn't have a sensor for the ambient temp which is why I didn't include it. You're right that this isn't very scientific.

I've also noticed different cooling performance with a monitor connected and then without a monitor. 4K monitor would make the device heat up even more.

Interesting!

[shortbloke]

@CooliPi My fork of this project includes using capturing the Ambient temperature using a DHT11, DHT22 or AM2302 based sensor. I think this is necessary if the goal is to compare cases with the fewest variables impacting the comparisons. https://github.com/shortbloke/stressberry

In addition, the idle, and run stress run times are now configurable via the command line.

I accept this isn't all that useful when looking for results linked in the readme here, since they are intentionally all running exactly the same test, but in unknown conditions. I published my own results on my blog https://martinrowan.co.uk where I standardised on a 1 hour test.

There are many variables that will impact the temperature:

• GUI vs Terminal
• Background processes
• Attached USB devices
• WiFi or Ethernet
• Firmware versions of specific components
• Screen resolution
• Enabling 4k display support
• Overclocking

• more