npm install
npm run serve
npm run build
npm run lint
Nutbox UI interface of version 2
Home Page: nutbox-interface-v2.vercel.app
npm install
npm run serve
npm run build
npm run lint
I'm starting to understand that after going back and forth from various features there is still a lot that needs to be added to make it more perfect to run in order for the tesnet to work better when used by participants, every time I perform an action or various button clicks it can't be recovered or reset but it happens automatically permanent, what about after I generate token but want to delete or edit because there are some errors that need to be added it doesn't seem to be fixed? and when i want to create new token or new contract this user can't do it either
Website slightly lags while connecting and while visiting staking/blog etc... And sometimes staking/blog and other options dont work properly we must tap 2-3 times on them and then it opens.. Hope u fix it
Thank u
TS6EZk1PemgR1NWvnE4C977NuLBjpxXgCL
Bug Description :
In the setting your asset distribution, the Block Number is entered even if it is not a number.
And deploy submit error.
Path :
main > community (click) > create your community (click) > get started (click)
Case / Action / Input data :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
On the Issue page of GitHub, fill in the bug information as shown in the figure below. Usually, it is needed to provide the phenomenon of the bug and the steps to reproduce the bug. If it is a security related issue, please contact the Nutbox official members directly instead of recording it here.
Finally, don't forget to write down your Tron address.
TKnYLrzM2dxwjuV2XHnQ1vUNsGvSdDd7Xd
Bug Description :
start block, stop block number Error when compared.
Path :
main > community (click) > create your community (click) > get started (click)
Case / Action / Input data :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
I made a community and got a link: https://test.nutbox.io/#/sub-community/home/0x00514D1e
But the community was disappeared.
Also, when I made the community, I made a staking pool with STEEM delegation pool and CAKE staking pool.
I already checked it was completed, but there's no staking pool when I checked again.
Bug Description :
Path :
main > community (click) > create your community (click) > get started (click)
Case / Action / Input data :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
Bug Description :
Community Balance/Community commision ratio - The alphabet 'e' or 'Hangul' is entered And It can be sent.
Commnuity Balance 'Confirm charge' Button - a typing error AS-IS : 'Confirm charfe'
Path :
main > community (click) > Manage Your Community (click) > setting (click) > Community Information
Case / Action / Input data :
Case 1 : input Community Balance = '1e2' And Click 'Confirm charge' Button > wallet sign popup open
'Confirm charge' Button - a typing error AS-IS : 'Confirm charfe'
Case 2 : input Community commision ratio = '1e' And Click 'Confirm charge' Button
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
side scroller option is not showing in windows ,not able to go through the bottom of the test.nutbox.io webpage in my laptop (windows).
Bug Description :
In the setting your asset distribution, the Reward Amount is entered even if it is not a number.
And deploy submit error.
Path :
main > community (click) > create your community (click) > get started (click)
Case / Action / Input data :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
Tron address: THGTz5kbcWKTQBPqxBu7EudGUos6R1gQe3
Bug Description :
Community Name And Community Link - Unlimited Inputs and Input Error.
Community Link - url validation not check
Path :
main > community (click) > Manage Your Community (click) > setting (click) > Community Information Edit (Click)
Case / Action / Input data :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
Also the social info needs some sort of error check before update.
This twitter link will go to https://test.nutbox.io/@yuzuT#/
and other links are all weird
Logo and poster are not saved, although they meet the requirements.
MacBook Pro (Retina, 13-inch, Early 2015), macOS Motnerey v12.1
Browser: Brave v1.34.80 Chromium: 97.0.4692.71 (x86_64)
Community link: https://test.nutbox.io/#/sub-community/home/?id=0xecf3325c1babea8d97af8e2d7b5989459c696d02
there is still a lot that needs to be fixed by the dev, after today's update did not provide a complete fix, I've added a Steem Hive pool and with a success notification but when reloading the site page all pools are gone, only the bsc pool is left
and I did the addition of the pool again, the notification message failed
Community name : Etarbucks
Community Balance : 500,000 ETH
Issuer's Metamask address : 0xd6F3d7FDB639f86eea83051435F1b9BC799348f1
Bug description : Popping up 'Contract invocation error' sign before progress
[Situations & Pictures]
When staking mining, only the coins deployed at creation time can be pledged, but BNB cannot be pledged, and the contract that requires pledged coins cannot be seen in the direct interface. So how to pledge, it seems that only the owner of the deployment can see Own token contract
https://www.youtube.com/watch?v=0iBB9sVOWgA
When you try to initiate stake mining with a community using Nutbox Walnut, some people may experience the issue that prompt dialogue box does not pop up after clicking "Approve Contract"
and proceed to signing the smart contract. You may open the web log (press F12
key on your keyboard) to try and figure out what went wrong. Here are some of the measures you can try if you encounter this issue:
If you have tried all the measures above and it still didn't work, it is most likely that your MetaMask extension is having problems. Confirm this by trying to create a community or deploy a new asset:
https://www.youtube.com/watch?v=bUra4shcp_k
If you also cannot create a community or deploy new asset (i.e. prompt dialogue box does not pop up after clicking "Approve Contract"
or "Deploy"
and proceed to signing the smarrt contract), it's most likely that your MetaMask extension is having issues connecting to Ethereum networks.
The easiest solution to this issue is to uninstall your MetaMask extension and re-install it again.
TronLink Wallet Address: TPnz69xHLvySMzQjXD2XVFh4seUS8GPjct
CSS error.
Icon not should be styled with cursor:pointer. Or the icon should be added to the link
https://test.nutbox.io/#/sub-community/home/?id=0xc5712e020be401129a89babc71414d77A9908592
Bug Description :
If you don't have a wallet or if you don't have a wallet connection, the page won't load normally.
Is this right?
The normal site displays the page normally and provides a wallet connetion button or guidance.
The same goes for Tronlink on Peanut Site.
That way, I can see how many people use it, how many communities there are.
Path :
main > Community
main > Crowdstaking
etc.
Case / Action / Input data :
case1 :
case2 :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
No minimum and maximum values.
I have set the values for (Pass) Threshold 0,0000001. Saved.
The displayed value has become 0.
And fields have no limits for max values.
Bug Description :
In the setting your asset distribution, If you delete it does not changed to the previous startblock datetime.
Path :
main > community (click) > create your community (click) > get started (click)
Case / Action / Input data :
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
Bug Description :
Path :
main > Community
main > Crowdstaking
etc.
Case / Action / Input data :
case1.
case2.
main > Community > 'Manage Your Community' button click
and on the sub-page('setting' and 'add staking pool') and functions etc error
My Tron Wallet Address :
TQtuaRMmCDFwGGX4yHcQMEwe7DHC743qjg
I can clearly see the community on the home page, but click on “More”to see more information, but the hint does not exist,I’m sure there’s nothing wrong with my network,I tried it a few times, and it was..
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.