error building snapshot - server response 'init' about asu

[ghoffman9]

i now have a second router that boot-looped after an apparently-successful build on auc.
It’s a snapshot build, for rt4230w. possibly of interest, I have been using openssl not mbedtls.
I created the original config on my router by downloading from downloads.openwrt.org, adding packages, and then create an update using auc:

first, i downloaded r25242:

install updated basic image

cd /tmp && wget https://downloads.openwrt.org/snapshots/targets/ipq806x/generic/openwrt-ipq806x-generic-askey_rt4230w-rev6-squashfs-sysupgrade.bin && sysupgrade openwrt-ipq806x-generic-askey_rt4230w-rev6-squashfs-sysupgrade.bin

##use openssl and customize
opkg update && opkg install --force-overwrite libustream-openssl openssl-util px5g-standalone libuhttpd-openssl && opkg remove mbed && opkg install wpad-openssl && opkg install luci kmod-usb-printer luci-app-p910nd luci-app-uhttpd auc luci-app-attendedsysupgrade irqbalance luci-app-vnstat2 luci-app-statistics

this worked to get r25242 running on one of my access points.
Then doing auc, an r25250 image was built without reported error. I installed that using auc -y. this led to boot loop. that built file is attached.
openwrt-r25250-d4f272ccf3b6-ipq806x-generic-askey_rt4230w-rev6-squashfs-sysupgrade.zip

I really appreciate the tools you have built and I’m only concerned that others not fall into the same problem, since there have been other reports of boot-loop in the past few days.

[ghoffman9]

also same error with firmware-selector

[aparcar]

Odd I'll have a look later. I keep on getting reports of this error...

[briney83]

{
"url": "https://sysupgrade.openwrt.org",
"revision": "r25233-6da308f4de",
"advanced_mode": "0",
"sha256_unsigned": "",
"branch": "SNAPSHOT",
"efi": null,
"profile": "xiaomi,redmi-router-ax6000-stock",
"target": "mediatek/filogic",
"version": "SNAPSHOT",
"packages": [],
"diff_packages": true,
"filesystem": "squashfs",
"client": "luci/undefined"
}