No subnet declaration for at0 (no IPv4 addresses). about wifi-pumpkin-deprecated

[mh4x0f]

hi, you need to create the AP with airbase-ng and send me ifconfig output. I need to check if the interface at0 is working, the problem is on interface at0 is not mounted.

[ISeeWorld]

Thank you for your reply.i do as you say,
"root@man:# airbase-ng -c 9 -e sky wlan0mon
For information, no action required: Using gettimeofday() instead of /dev/rtc
12:23:36 Created tap interface at1
12:23:36 Trying to set MTU on at1 to 1500
12:23:36 Access Point with BSSID 00:F1:40:61:04:AB started.
"
"
root@man:# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:d7:b9:23
inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fed7:b923/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5201 errors:0 dropped:0 overruns:0 frame:0
TX packets:5533 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2889943 (2.7 MiB) TX bytes:1334484 (1.2 MiB)
Interrupt:19 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:7274 errors:0 dropped:0 overruns:0 frame:0
TX packets:7274 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1182645 (1.1 MiB) TX bytes:1182645 (1.1 MiB)

wlan0mon Link encap:UNSPEC HWaddr 00-F1-40-61-04-AB-00-00-00-00-00-00-00-00-00-00
UP BROADCAST NOTRAILERS RUNNING PROMISC ALLMULTI MTU:1800 Metric:1
RX packets:14766 errors:0 dropped:840 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2429070 (2.3 MiB) TX bytes:0 (0.0 B)
"
I could not find the at0,maybe it is the key problem.what shou i do to mount the device?Thank you very much.

[ISeeWorld]

I use the new version software,but shows
"
QLayout::addChildLayout: layout "" already has a parent
QWidget::setLayout: Attempting to set QLayout "" on frm_Settings "", which already has a layout
QLayout::addChildLayout: layout "" already has a parent
QWidget::setLayout: Attempting to set QLayout "" on frm_Settings "", which already has a layout
Starting Thread:Airbase-ng
2015-08-07 22:21:32,395 : ---[ Start Airbase-ng Fri Aug 7 22:21:32 2015]---
2015-08-07 22:21:32,396 : ----------------------------------------------------
Exception in thread Airbase-ng:
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 552, in bootstrap_inner
self.run()
File "/usr/share/3vilTwinAttacker/Modules/utils.py", line 110, in run
self.process = Popen(self.cmd,stdout=PIPE,stderr=STDOUT)
File "/usr/lib/python2.7/subprocess.py", line 679, in __init
errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1259, in _execute_child
raise child_exception
TypeError: execv() arg 2 must contain only strings
"
i dont know why.may be the this tool is not good suitable for kali.there are so many bugs.
Thank you for your help.