trojan-go脚本在安装0.7.x版本的核心后会无法连接 about v2ray-tcp-tls-web

[phlinhng]

您好，我剛才重新試了一遍，發現復現不出來。（配置文件格式我從 0.6.0 開始就改了）在我的測試機上，用 v1.2.0 安裝 trojan-go 可以正常連接。
方便提供 systemctl status trojan-go 和 /usr/bin/trojan-go/trojan-go -config /etc/trojan-go/config.json 的報錯信息給我參考嗎？

[wangfeng35]

systemctl status trojan-go的信息：
● trojan-go.service - Trojan-Go - An unidentifiable mechanism that helps you bypass GFW
Loaded: loaded (/etc/systemd/system/trojan-go.service; enabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: exit-code) since Sun 2020-06-28 12:17:23 UTC; 1s ago
Docs: https://p4gefau1t.github.io/trojan-go/
Process: 17592 ExecStart=/usr/bin/trojan-go -config /etc/trojan-go/config.json (code=exited,
status=203/EXEC)
Main PID: 17592 (code=exited, status=203/EXEC)
CPU: 583us

Jun 28 12:17:23 instance-3 systemd[1]: Started Trojan-Go - An unidentifiable mechanism that helps you b
ypass GFW.
Jun 28 12:17:23 instance-3 systemd[1]: trojan-go.service: Main process exited, code=exited, sta
tus=203/EXEC
Jun 28 12:17:23 instance-3 systemd[1]: trojan-go.service: Unit entered failed state.
Jun 28 12:17:23 instance-3 systemd[1]: trojan-go.service: Failed with result 'exit-code'.

/usr/bin/trojan-go/trojan-go -config /etc/trojan-go/config.json 无错误 可以正常启动

[wangfeng35]

systemctl status trojan-go的信息：
● trojan-go.service - Trojan-Go - An unidentifiable mechanism that helps you bypass GFW
Loaded: loaded (/etc/systemd/system/trojan-go.service; enabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: exit-code) since Sun 2020-06-28 12:17:23 UTC; 1s ago
Docs: https://p4gefau1t.github.io/trojan-go/
Process: 17592 ExecStart=/usr/bin/trojan-go -config /etc/trojan-go/config.json (code=exited,
status=203/EXEC)
Main PID: 17592 (code=exited, status=203/EXEC)
CPU: 583us

Jun 28 12:17:23 instance-3 systemd[1]: Started Trojan-Go - An unidentifiable mechanism that helps you b
ypass GFW.
Jun 28 12:17:23 instance-3 systemd[1]: trojan-go.service: Main process exited, code=exited, sta
tus=203/EXEC
Jun 28 12:17:23 instance-3 systemd[1]: trojan-go.service: Unit entered failed state.
Jun 28 12:17:23 instance-3 systemd[1]: trojan-go.service: Failed with result 'exit-code'.

/usr/bin/trojan-go/trojan-go -config /etc/trojan-go/config.json 无错误 可以正常启动

ExecStart=/usr/bin/trojan-go -config /etc/trojan-go/config.json
bin的路径不对，应该是/usr/bin/trojan-go/trojan-go

[phlinhng]

ExecStart=/usr/bin/trojan-go -config /etc/trojan-go/config.json
bin的路径不对，应该是/usr/bin/trojan-go/trojan-go

感謝 @wangfeng35 大佬協助。這次故障的原因是 trojan-go v0.7.x 的 trojan-go.service 內的路徑與以往版本不同造成的，和配置文件無關，現己修復。

[phlinhng]

己修復，己經用 v1.2.0 版本安裝 trojan-go 的用戶請升級腳本後運行"更新 trojan-go"即可解決。