Wifi is not working (with BCM4630) + can’t find EFI partition of my Ventura installed about rog-zephyrus-g14-ga401-hackintosh

[throwaway29292]

You'll need to download AirportItlwm intended for Ventura BTW. The kext is version-specific.

[ngntriminh]

1. Adding ncpi=0x2000 may solve the problem, I don't know where to find Above 4G Decoding in my case either, but without ncpi=0x2000 I could not boot.
2. Use the EFI in the Ventura branch instead because the main branch is used for Sonoma, that's why you don't have Wi-Fi. Mine is AX200 too and Wi-Fi works fine.
3. To view your EFI after installation, you have to mount your partition using OpenCore Configurator.

[Z2VvZ2Vv]

Ok i will change the EFI folder, it’s maybe for that but the BCM4630 is natively supported by macOS ?

And for the EFI folder in the installed Ventura, I already check with OpenCore Configurator, it’s for that I say that « diskutil list » command don’t show the EFI partition of my installed Ventura. Have you an idea ?

[throwaway29292]

I sadly don’t. I have installed my macOS on drive with Windows and its EFI partition already being there. Take a look into the Disk Utility. Maybe it’ll allow you to shrink the APFS partition and create FAT32 partition for the EFI files.

…

21. 11. 2023 v 11:53, Z2VvZ2Vv ***@***.***>:

[PIut02]

When using UMAF, you will find Above 4G Decoding in the Device Manager > PCI Subsystem Settings, I'll add detailed instructions to the README in the next update.

And if you want to use a Broadcom network card, you need to change the WIFI and Bluetooth kext. The kext of this repository is only available for Intel Network Interface Cards.

To remap usb, you can check this repository: https://github.com/USBToolBox/tool.

[Z2VvZ2Vv]

So i can't use my BCM ? But the bluethooh works very well ? I don't understand

[PIut02]

Because the Intel network card also uses the same Bluetooth driver, so Bluetooth works, but WiFi is not the same. If your BCM model is supported, simply remove IntelBTPatcher, IntelBluetoothFirmware and AirportItlwm, then add AirportBrcmFixup. If it is a native network card, it will be used without AirportBrcmFixup.

[Z2VvZ2Vv]

I give up, WiFi not working on macOS and Windows. And if I use the Intel card I don’t care I wanted airdrop. No problem.. I’m still sad 😩