[Bug] Anne Pro2 'g' key press issue about qmk_firmware

[zvecr]

is there any chance to make it work perfectly again

Given I cannot reproduce the issue, and I dont use the keyboard outside testing purposes, probably not.

Some areas to look into:

• Different compiler version?
• Larger values of MATRIX_IO_DELAY over the default of 30?
• Any Intermittent communication issues with uart
  • Disable/rip out bluetooth and rgb_matrix code?

My primary concern of #23221 was to remove completely redundant code (that I had previously said was not required at the time of the keyboards PR). Its unlikely I would look into the issue myself.

[tzarc]

Just confirming that I can't reproduce the issue with the 'g' key on my AP2/C18 either.

[hitsmaxft]

@zvecr thanks for you pr make annepro2 better, is there any chance to make it work perfectly again

[hitsmaxft]

is there any chance to make it work perfectly again

Given I cannot reproduce the issue, and I dont use the keyboard outside testing purposes, probably not.

Some areas to look into:

* Different compiler version?

Compiling firmware by Github Action from qmk-firmware repo has issue to , confirms that not a compiler issue.

* Larger values of `MATRIX_IO_DELAY` over the default of `30`? ？

* Any Intermittent communication issues with uart

  * Disable/rip out bluetooth and rgb_matrix code?禁用/删除蓝牙和 rgb_matrix 代码？

My primary concern of #23221 was to remove completely redundant code (that I had previously said was not required at the time of the keyboards PR). Its unlikely I would look into the issue myself.

Since there are other user in annepro2 discord reproduce this issue too, maybe a version related issue of annepro2 itself
I will try your suggestions . Thanks again.

[hitsmaxft]

update: installing same firmware on my another annepro2 c18, nothing wrong happened, so it's a hardware related but likely fixed in stock firmware

[lukevanlukevan]

Joining to say I experience the same issue, g and 1 key are intermittent but stock firmware does work. Maybe a bad switch that now operates under a certain threshold when using QMK that the main firmware still reads correctly.

[hitsmaxft]

Joining to say I experience the same issue, g and 1 key are intermittent but stock firmware does work. Maybe a bad switch that now operates under a certain threshold when using QMK that the main firmware still reads correctly.

I've fixed the issue by config debounce to 3ms base on develop branch (which just updated annepro2' matrix scan code)

this problem did triggered by some hardware related issue. lower debounce works on my keyboard. you may try it