Weird quirk when an entity is disabled about opensprinkler-card

[rianadon]

Thank you both! It should be possible to make the card still load even if there are disabled entities. I'll look into it.

[Indianb0y016]

I've been pulling my hair out trying to figure out why my card wasnt showing! I decided not to post an issue because I was afraid it would be something trivial but it looks like its not just me. Hopefully dev can get it sorted soon cause this card is pretty.

[rianadon]

That's really weird. It sounds like maybe there's some error being thrown inside the card. If you go to the Home Assistant logs or the browser console, are there any errors that look like they're from the card?

Also, if you could provide your config that would help greatly, as I don't see this quirk on my end.

[thisisbenwoo]

Didn't see anything in my logs. Definitely looked there first. Not at my computer for a while, but you have my config from before. Only difference is the change to extra_entities

[Indianb0y016]

Can confirm. Re-enabled all the disabled entities and the card appeared as normal. Disabled the rain delay entity and it disappeared. I ASSUME it is because the entities are hardcoded in the card and cant be nonexistent, else the card will bug out. Nothing in logs unfortunately.

[rianadon]

Ohhh. You are disabling entities as in this switch, correct? Turning this off breaks things, so hopefully we are having the same problem.

I didn't even know you could do that.

[thisisbenwoo]

Ohhh. You are disabling entities as in this switch, correct? Turning this off breaks things, so hopefully we are having the same problem.

I didn't even know you could do that.

That's exactly it.
eg. Take a quick look at this:

So, when I bought our house, the stations were already there, and I'm integrating with what I have. But since I have an "Unknown" station, I want to disable the 3 entities (using what you referred above).

[Indianb0y016]

Same situation here. I have 11 Zones in our house and OS only has a 16 zone option after 8 zones. This leaves me with 5 zones that are useless and unneeded. Despite being disabled in OS, they show up in HA, which is just an integration thing. Hence the card relying on the full integration config, any entity being disabled will break the card. While it is unfortunate, I can understand why it is the way it is. So Im not upset about it. The card is useful because it removes the need to create manual station entities that rely on an input boolean, which is more than acceptable in my opinion. Great card! I would highly suggest adding this info in the readme so other users arent confused over issues like this.

[rianadon]

Fixed in v1.9