Protobuf Fails about rslidar_sdk

[HaoQChen]

could you share your config.yaml ?

it seem that, your receiver did not set msg_source to receive message from protobuf

[adamanov]

You might need to change your internet connection settings, and after that you can properly connect to the lidar

[arwinder-jaspal]

You might need to change your internet connection settings, and after that you can properly connect to the lidar

I have the exact same setting and the lidar is not working

[CQ-Quest]

same problem encounter. If you have confirmed that all the configurations are correct and there is no problem with the lidar itself, try resetting it by turning off and on the power. That's how I solved the problem.

[lonlonago]

port num is error, reset it in config file