Two Issues on New Installation about milestones-pm

[capeterson]

Your second issue is related to the user chatter following too many users, and when milestones tries to have them follow that task. You should be able to workaround that issue by turning off the autofollow setting for milestones. You could also clear out some of the objects of users the troublesome user is following to allow autofollow to work properly.

I'll see if I can send a pull request for handling this issue sometime next week as a proper fix.

[DavidR-zz]

Chris,

Thanks so much! It worked!

Any sense of the issue re: "Status at a glance"?

-David

---

From: Chris Peterson [email protected]
To: DavidR [email protected]
Sent: Friday, February 17, 2012 10:34 PM
Subject: Re: [Milestones-PM] Two Issues on New Installation (#57)

Your second issue is related to the user chatter following too many users, and when milestones tries to have them follow that task. You should be able to workaround that issue by turning off the autofollow setting for milestones. You could also clear out some of the objects of users the troublesome user is following to allow autofollow to work properly.

I'll see if I can send a pull request for handling this issue sometime next week as a proper fix.

---

Reply to this email directly or view it on GitHub:
#57 (comment)

[capeterson]

My shameful secret I've spent more time mucking around in the code than I actually have using milestones. I'll have to go learn how to use that feature before I can help. If I have time tomorrow I'll see what I can figure out.

[DavidR-zz]

Thanks again...really appreciate it!

---

From: Chris Peterson [email protected]
To: DavidR [email protected]
Sent: Friday, February 17, 2012 11:19 PM
Subject: Re: [Milestones-PM] Two Issues on New Installation (#57)

My shameful secret I've spent more time mucking around in the code than I actually have using milestones. I'll have to go learn how to use that feature before I can help. If I have time tomorrow I'll see what I can figure out.

---

Reply to this email directly or view it on GitHub:
#57 (comment)

[ToddAH]

Was this determined to be an issue? I have the same issue with my installation. I can not view the Status at a glance charts for new Projects.

[ToddAH]

I found what appears to be the issue.... IF there is no budget defined for total hours or total expense budget the Charts will not display. Likely a math error in the chart calculation?

Actually it looks like a value of 0 will work ok so its the null value by default that is impacting the chart function.

[DavidR-zz]

That did it! I had a budget for total hours, but not total expenses. Thanks ToddAH!

[ReidCarlberg]

As a late breaking follow up, projects also have to be flagged with a status of Active.

[ReidCarlberg]

PS thx to everyone who joined in!

[DavidR-zz]

Thanks everyone!