saursin / atomshell

A basic shell program for embedded processors

atomshell

A basic shell program for embedded processors.

Getting Started

Setup RISC-V Atom

First, we need to clone and setup the RISC-V Atom repository.

Clone atomshell

Open terminal (say, terminal-1) and run following command

$ git clone https://github.com/saurabhsingh99100/atomshell.git

Build Atomshell

$ cd atomshell
$ make Target=hydrogensoc

Run Atomshell

Open another terminal (say, terminal-2) and run the following command to generate virtual ports: simport & userport.

$ atomsim-gen-vports

Now, connect to generated virtual port: userport.

$ screen $RVATOM/userport 9600

Now in terminal-1, run atomshell in AtomSim using the following command

$ make run

Now, switch back to terminal-2 and you should see AtomSim booting atomshell. Press enter to continue with the boot. You should see the atomshell prompt.

To see all the supported commands run the help command

To exit screen command on terminal-2, press ctrl + a, then press : and type quit, press enter to exit.