sbcshop1 Goto Github PK

adafruit_circuitpython_imageload

Super-slim image decoder that loads code as needed to minimize memory use

fvgx

https://github.com/sbcshop/pxt-stembit

lora-hat-for-raspberry-pi

my-_new_exenion

A MakeCode project

ota_test

pico-2g-expansion

Raspberry Pi Pico 2G Expansion is a QUAD-Band GSM/GPRS/GNSS Expansion designed dedicatedly for Raspberry Pi Pico with UART, USB 2.0 Interface, 850/900/1800/1900 MHz.

pico-barcode-hat-hardware

pico-cube

Pico Cube is a 4x4x4 LED cube HAT for Raspberry Pi Pico with 5V DC operating voltage. Pico cube, a monochromatic( Red, Blue, Green) LED with 64, is a fun way to learn programming.

pico-lora-expansion

Pico LoRa™ Expansion is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S/E22-400T22S SMA antenna connector that covers 868MHz/433MHz frequency band , Onboard 1.14" LCD,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto m

pico-sense-hat

Sense HAT for Raspberry Pi Pico is a four-sensor environment monitoring device that measures temperature, air quality, humidity, and colour. The Sense HAT board is perfect for the environment monitoring project since it has multi-sensors with the ability to measure temperature, humidity, air quality and colours.

picube

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Components.

raspberry-pi-pico-relay-board

Raspberry Pi Pico Relay Board is developed by SB Components with the potential to control up to 4 appliances and loads up to 240V AC@ 7A, 30V DC@ 10A.

readpi_nfc_software

ReadPi 13.56 MHz frequency based NFC Reader/Writer powered by Raspberry Pi Pico W unit. This github provides getting started guide and other working details for ReadPi NFC version.

sbcshop1

Config files for my GitHub profile.

test-new_wifi

A MakeCode project

uhf_reader_pico_w_software

This github page provides a getting started guide and other working details for the UHF reader for Pico W. The UHF Reader for Pico W is a rapid multi-tag reading device for efficient and effective inventory management.

yahboom_mbit_en

This is yahboom_mbit English version.