Change log 3.1 about esp32-miniwebradio

[schreibfaul1]

The equaliser functions can now be set from the display. If you are using a BT transmitter, you can now also control it from the display. You can now set a separate alarm time for each day of the week. Internally, many elements are programmed in an object-oriented way, which increases reliability. Arduino is run as a component again, allowing for advanced settings. This increases the WiFi throughput, so that stations with up to 320KBit/s work smoothly again. Sometimes WiFi problems occur, such as unavailable DNS, which is now neutralised. The credentials are sent to the router up to 3 times, which is useful as some routers will deny access if the connection is briefly interrupted.

[valera39]

And the mode of switching off when long pressing the * button has been fixed?

[schreibfaul1]

and I have added an "OFF" button, the red one, to switch to sleep mode (sound off and display dark)

[valera39]

Thanks, can I use the remote to put it in sleep mode?

[FranZatGIT]

Hi Wolle, many thanks - all of that new things are really great. I uploaded the new version. A few things I noticed but I need to verify:

• I can add stations in the web tool , see it in the drop down list but i cannot select the new sender and its not in the list on the display
• The VU Meter are sometimese missing bars ( looks like an update issue)
• from time to time 192k sender (especially when changing to the sender ) have short interruptions/distortion
• I cannot see the new Off button ( 240*320 ILI9341) (equalizer and BT are there)

Just to mention it - I added some code lines for my implementation (Speaker relais, RGB LED, Power Control of Amplifier/Radio, Batterie Voltage check,...) BUT for the above mentioned points that lines /Lib has been commented out

Has anyone else noticed any of these points?

Thanks Franz

[schreibfaul1]

Hi Valera,
that will work, the button you have assigned to "Mute" can switch sleep mode on and off.

[schreibfaul1]

Hello Franz,

• if you have added a new station, the "new" station list is transferred to the NVS with the save button. You will find the station in the log. The NVS content is updated with the load button. This is the same routine as at startup. This is from the time when there was still a stations.cvs file. I will improve this
• The VU meter is not always drawn correctly, will be corrected soon
• I only recently added the Off button. The icon, , is probably missing and needs to be copied from the zip file.