Issue with Setting Sector Size on Seagate ST24000NM002H after Interruption, Drive Bricked about openseachest

[vonericsen]

Hi @huahuasousou,

On #145 I shared a test build with a --force option. Can you give that a try and see if it solves this issue for you?

[huahuasousou]

Hi @huahuasousou,

On #145 I shared a test build with a --force option. Can you give that a try and see if it solves this issue for you?

Hi, thank you for the suggestion. I had already checked all the issues related to setSectorSize and even tried using the pre-built version with the --force option before sending it in for RMA. Unfortunately, that did not work for me.
Since the SMART information is currently unreadable, and both long and short tests cannot be performed, maybe I has thoroughly corrupted the firmware, since I was directly unplugging the SATA cable. There is likely little chance of recovery now. Nevertheless, I appreciate your response.

[vonericsen]

@huahuasousou,

Thank you for letting me know that did not work.
I am still investigating what else we can do in our tools to mitigate this further.
RMA is the best choice when at the point where the tool is unable to get it to recover.

If you have any suggestions on additional warnings that can be printed on the screen that would have helped, please let me know.