Can't connect to skoda new API about homeassistant-skodaconnect

[Farfar]

Which version are you using?
Also, the pip list command should be run as the user running homeassistant. If you are running in a python venv then activate venv and run again.

Everything stop working when skoda is acceted only on new API(skoda one).

Did this ever work for you? AFAIK Skoda Superb is still on old API.
Does the MySkoda app work correctly?

[Nunak]

Which version are you using?

Right now RC5. Was trying also 1.38.

Also, the pip list command should be run as the user running homeassistant. If you are running in a python venv then activate venv and run again.

Sorry my bad now under correct user:
(homeassistant) homeassistant@has-001:~/.homeassistant/scripts$ pip3.9 list
Package Version

acme 1.13.0
aiodiscover 1.4.0
aiodns 2.0.0
aioesphomeapi 2.6.6
aiofiles 0.6.0
aiogithubapi 21.4.0
aiohomekit 0.2.61
aiohttp 3.7.4.post0
aiohttp-cors 0.7.0
aioshelly 0.6.2
android-backup 0.2.0
appdirs 1.4.4
astral 2.2
async-dns 1.1.9
async-timeout 3.0.1
async-upnp-client 0.16.2
asyncio-dgram 1.2.0
atomicwrites 1.4.0
attrs 20.3.0
awesomeversion 21.2.3
backoff 1.10.0
bcrypt 3.1.7
beautifulsoup4 4.9.3
boto3 1.17.14
botocore 1.20.14
cachetools 4.2.1
casttube 0.2.1
certifi 2020.12.5
cffi 1.14.5
cfgv 3.2.0
chardet 3.0.4
ciso8601 2.1.3
click 7.1.2
coloredlogs 15.0
construct 2.10.56
coronavirus 1.1.1
croniter 0.3.37
cryptography 3.3.2
cssselect 1.1.0
deepmerge 0.1.1
defusedxml 0.6.0
distlib 0.3.1
distro 1.5.0
dnspython 2.1.0
dnspython3 1.15.0
ecdsa 0.14.1
emoji 1.2.0
envs 1.3
filelock 3.0.12
flux-led 0.22
future 0.18.2
getmac 0.8.2
greeclimate 0.11.4
greenlet 1.0.0
gTTS 2.2.2
h11 0.12.0
ha-ffmpeg 3.0.2
hacs-frontend 20210429001005
hass-nabucasa 0.43.0
HATasmota 0.2.13
home-assistant-frontend 20210504.0
homeassistant 2021.5.5
http-ece 1.1.0
httpcore 0.13.2
httpx 0.18.0
humanfriendly 9.1
hyperion-py 0.7.4
identify 2.2.3
idna 2.10
ifaddr 0.1.7
influxdb 5.2.3
influxdb-client 1.14.0
iniconfig 1.1.1
integrationhelper 0.2.2
Jinja2 2.11.3
jmespath 0.10.0
josepy 1.7.0
jsonpath 0.82
locationsharinglib 4.1.5
lxml 4.6.2
MarkupSafe 1.1.1
mcstatus 5.1.1
multidict 5.1.0
mutagen 1.45.1
mysqlclient 2.0.3
natsort 7.1.1
netdisco 2.8.2
netifaces 0.10.9
nodeenv 1.6.0
numpy 1.20.1
packaging 20.9
paho-mqtt 1.5.1
Pillow 8.1.2
pip 21.1.2
PlexAPI 4.5.1
plexauth 0.0.6
plexwebsocket 0.0.13
pluggy 0.13.1
pre-commit 2.12.0
protobuf 3.15.2
py 1.10.0
py-vapid 1.7.1
pyairvisual 5.0.8
pyasn1 0.4.8
pycares 3.1.1
PyChromecast 9.1.2
pycognito 2021.3.1
pycparser 2.20
pycryptodome 3.9.8
pycryptodomex 3.10.1
pyfttt 0.3
pyhiveapi 0.3.9
pyipp 0.11.0
PyJWT 1.7.1
PyMetno 0.8.3
PyMySQL 1.0.2
PyNaCl 1.3.0
pynut2 2.1.2
pyOpenSSL 20.0.1
pyotp 2.3.0
pyparsing 2.4.7
pyps4-2ndscreen 1.2.0
PyQRCode 1.2.1
pyquery 1.4.3
pyRFC3339 1.1
pyroute2 0.5.18
pysmb 1.2.6
pytest 6.2.2
pytest-asyncio 0.14.0
python-dateutil 2.8.1
python-didl-lite 1.2.6
python-forecastio 1.4.0
python-jose 3.2.0
python-miio 0.5.6
python-mpd2 3.0.4
python-slugify 4.0.1
pytz 2021.1
pywebpush 1.9.2
PyXiaomiGateway 0.13.4
PyYAML 5.4.1
queueman 0.5
requests 2.25.1
requests-toolbelt 0.9.1
responses 0.12.1
RestrictedPython 5.1
rfc3986 1.4.0
rpi-bad-power 0.1.0
rsa 4.7.2
ruamel.yaml 0.15.100
Rx 3.1.1
s3transfer 0.3.4
samsungctl 0.7.1
samsungtvws 1.6.0
scapy 2.4.5
setuptools 49.2.1
six 1.15.0
skodaconnect 1.0.40rc5
sniffio 1.2.0
snitun 0.20
soupsieve 2.2
speedtest-cli 2.1.3
spotipy 2.18.0
SQLAlchemy 1.4.13
text-unidecode 1.3
toml 0.10.2
tqdm 4.57.0
typing-extensions 3.7.4.3
unasync 0.5.0
urllib3 1.26.3
virtualenv 20.4.3
voluptuous 0.12.1
voluptuous-serialize 2.4.0
wakeonlan 2.0.1
WazeRouteCalculator 0.12
websocket-client 0.56.0
wheel 0.36.2
wled 0.4.4
xmltodict 0.12.0
yarl 1.6.3
yeelight 0.6.2
zeroconf 0.29.0

Everything stop working when skoda is acceted only on new API(skoda one).

Did this ever work for you? AFAIK Skoda Superb is still on old API.

Yes it was working for me. That's strange is not working for me on old version (1.38).

Does the MySkoda app work correctly?

Yes it's working for me fine App on android and also via WEB.

[Farfar]

(homeassistant) homeassistant@has-001:~$ python3 -m pip list

I can't see that the skodaconnect library is installed from that list? It should show up with the same version as the HASS component, 1.0.40rc5

[Nunak]

I can't see that the skodaconnect library is installed from that list? It should show up with the same version as the HASS component, 1.0.40rc5

How is that possible ? I am using HACS.

Previous list updated pip vs pip3.9

(homeassistant) homeassistant@has-001:/root$ pip3.9 install --upgrade skodaconnect
Requirement already satisfied: skodaconnect in /srv/homeassistant/lib/python3.9/site-packages (1.0.40rc5)

[daranto]

Hello,
I have the same issue. The MySkoda App is working with my new Enyaq IV. But the custom component does not. Wrong credentials:

Could not login to Skoda Connect, please check your credentials and verify that the service is working

[rhoegen]

I had the same issue with the custom component and noticed that the skoda-connect.com Website did not recognize me accepting the new terms and conditions. Every time I logged out and in it wanted me to accept again. The solution for me was to delete all browser history/cookies and login again to the site, accepting the terms & conditions one final time.

[Farfar]

@daranto and @Farfar could you try what rhoegen suggested? Login to skoda connect web portal and make sure to accept terms and conditions. If you have done so already you can try in new browser.

[Nunak]

I had the same issue with the custom component and noticed that the skoda-connect.com Website did not recognize me accepting the new terms and conditions. Every time I logged out and in it wanted me to accept again. The solution for me was to delete all browser history/cookies and login again to the site, accepting the terms & conditions one final time.

for me it was asking just one time. Now it's not asking me for accept, but integration is not working.

[Farfar]

I had the same issue with the custom component and noticed that the skoda-connect.com Website did not recognize me accepting the new terms and conditions. Every time I logged out and in it wanted me to accept again. The solution for me was to delete all browser history/cookies and login again to the site, accepting the terms & conditions one final time.

for me it was asking just one time. Now it's not asking me for accept, but integration is not working.

Do you still get the error from the integration that you need to accept the conditions? If so then try another web browser on skoda connect web portal.

[Nunak]

I had the same issue with the custom component and noticed that the skoda-connect.com Website did not recognize me accepting the new terms and conditions. Every time I logged out and in it wanted me to accept again. The solution for me was to delete all browser history/cookies and login again to the site, accepting the terms & conditions one final time.

for me it was asking just one time. Now it's not asking me for accept, but integration is not working.

Do you still get the error from the integration that you need to accept the conditions? If so then try another web browser on skoda connect web portal.

Yes I have this error.
2021-06-02 16:43:41 ERROR (MainThread) [skodaconnect.connection] Login failed for skoda account, the terms and conditions must be accepted
hmmh that's strange. Firefox is not asking for accept, Chrome is not asking for accept, but Safari yes and every login.

[daranto]

seems to work now. But I did not change anything. Maybe the Skoda Service was unavailable, when I tried to configure the component.

[Farfar]

hmmh that's strange. Firefox is not asking for accept, Chrome is not asking for accept, but Safari yes and every login.

Try to clear cache in Chrome/FF and see if you can accept T&C again.

[Farfar]

Since I haven't heard back I assume the issue was T&C

[Nunak]

Issue still exist :(

[Farfar]

Issue still exist :(

Unforrunately I can't force anything. If the API redirects to EULA/T&C then it needs to be accepted and you need to do it on the site https://www.skoda-connect.com
If that doesn't "stick" then I'm afraid there's nothing I can do.