[BUG] Packets forwarding not working with Secure NAT enabled with vDHCP enabled and vNAT disabled about softethervpn

[shakibamoshiri]

I cannot see setting an IP for the hub
try this and report again , if did not work

/CMD SecureNatHostSet /MAC:none /IP:192.168.30.2 /MASK:255.255.255.0;

an IP for the gateway => 192.168.30.1
an IP for the hub => 192.168.30.2
some IPs for clients => 192.168.30.10 ~ 192.168.30.200

[CravateRouge]

I still have the same issue doing:

/CMD SecureNatHostSet /MAC:none /IP:192.168.30.2 /MASK:255.255.255.0;
# I also tried
/CMD SecureNatHostSet /MAC:none /IP:192.168.30.1 /MASK:255.255.255.0;

I can ping those IPs from my softether clients but I can't reach other networks

[shakibamoshiri]

this is incorrect ,

/CMD SecureNatHostSet /MAC:none /IP:192.168.30.1 /MASK:255.255.255.0;

here is the full setup

/CMD BridgeCreate VPN /DEVICE:vpn /TAP:yes;
/CMD SecureNatHostSet /MAC:none /IP:192.168.30.2 /MASK:255.255.255.0;
/CMD DhcpEnable;
/CMD DhcpSet /START:192.168.30.10 /END:192.168.30.210 /MASK:255.255.255.0 /EXPIRE:7200 /GW:192.168.30.1 /DNS:8.8.8.8 /DNS2: /DOMAIN: /LOG:yes;
/CMD NatDisable;
/CMD SecureNatEnable;


ip link set tap_vpn up
ip addr add 192.168.30.1/24 brd + dev tap_vpn

then you should be able to ping

• 192.168.30.1
• 192.168.30.2

then client can connect

[CravateRouge]

I can confirm it works now, thank you.