sparkfun/Fritzing_Parts
This repo houses all of the SFE Fritzing parts for use in diagrams in tutorials. If you create a new part in Fritzing that correlates to an SFE part, please add it here so others may use it and to avoid duplication.
Building open source widgets to make prototyping hardware easier since 2002.
This repo houses all of the SFE Fritzing parts for use in diagrams in tutorials. If you create a new part in Fritzing that correlates to an SFE part, please add it here so others may use it and to avoid duplication.
ATMega32U4 Arduino board, available from SparkFun Electronics
A library which allows you to communicate seamlessly with u-blox GNSS modules. Compatible with both Arduino and ESP-IDF
A tutorial on how to build your own headphones with ambient microphones for loud environments.
Toolkit of common functionality for use within SparkFun Libraries
SparkFun's Public Eagle PCB Footprints
SparkFun's MicroPython port of OpenCV
Tutorial and hardware files for a digital switch capable of switching DC loads up to 12V. Includes 3.3V Buck Regulator, N-channel MOSFET low-side switch circuit, and flyback diode on the load side.
A repo for all the compiled binaries, past and present, for the RTK Everywhere product line.
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
The SparkFun GNSS pHAT for the Raspberry Pi
SparkFun PCB panelizer for KiCad
An Arduino Library for the MAX3015 particle sensor and MAX30102 Pulse Ox sensor
I2C control of WM8960 Stereo Codec with 1W Class-D Speaker Drivers and Headphone Drivers by Wolfson Microelectronics
Open Source Hardware Datalogger
Arduino library for the SparkFun AS7331 Qwiic Spectral UV Sensor, which measures UV radiation on three channels, UVA, UVB, and UVC, with high sensitivity and accuracy.
Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
GlitchBooth Demo for the pcDuino3 and CSI Camera Module
MPPT single-cell LiPo battery charger based on the LT3562
Arduino Pro Mini shield using AD9837 to provide a small footprint signal generator.
The FemtoBuck is a small 6-36V 350mA constant-current LED driver, with analog or PWM dimmable control options.
Arduino support for ICM_20948 w/ portable C backbone
Board definitions for SparkFun-manufactured AVR, ARM, and ESP-based Arduino boards.
An Arduino library for the Sensirion SCD4x (SCD40 and SCD41) family of CO2 sensors
SMD with DB9 Connector, available from SparkFun Electronics
SparkFun's KiCad Libraries
NCP1402- 3.3V Step Up Breakout available from SparkFun Electronics
Triple axis accelerometer MMA8452, I2C based with tap and orientation settings.
Arduino Library for the ADXL345
A SparkFun Thing Plus development board for the ESP32-S3.