Comments (11)
just did a quick implementation of a program restart button (also reloads config from my understanding), looks like if you want to hard reset the microcontroller you need to run an extra wire to an IO pin
from opendtu.
... looks like if you want to hard reset the microcontroller you need to run an extra wire to an IO pin
A call to ESP.restart()
restarts the ESP32, no extra wire is needed.
from opendtu.
Just as a thought: Are you closing and reopening a Word document after you've saved it? Just do doublecheck that it's really saved? Would you like to have a feature in Word that closes/reopens the document automatically after each save? Or would you rather a version without such kind of saving issue?
If it's not saved and applied it's a bug which has to be fixed.
Did it occour that some settings where not saved?
from opendtu.
For me the need for a restart came up, when my inverter config got corrupted during runtime.
I was assuming, that it had to do with corrupted RAM, since things were back to normal once I triggered a reloading of the config. As a workaround I had a restart trigger in place when no data was published by openDTU for a while. For this I had the backend part, I added the UI part since it looked like a good fit for this request.
from opendtu.
This problem was propably fixed here: #29
If this issue still occours please open a new issue. If you just reboot your device for your own no one else will know that other people have such kind of issue as well and it will not get fixed.
from opendtu.
... looks like if you want to hard reset the microcontroller you need to run an extra wire to an IO pin
A call to
ESP.restart()
restarts the ESP32, no extra wire is needed.
thanks, did not know about that yet! using this now.
from opendtu.
This problem was propably fixed here: #29 If this issue still occours please open a new issue. If you just reboot your device for your own no one else will know that other people have such kind of issue as well and it will not get fixed.
I was running yesterdays' master so this fix was in. I was also running another openDTU not showing these problems, so currently my assumption is a broken ESP. (Problem appeared again, see #83 )
But in this discussion it should not matter why people want this functionality but if it should go into the project or not. I'd say it is probably useful and does not influence other functionality.
from opendtu.
But in this discussion it should not matter why people want this functionality but if it should go into the project or not. I'd say it is probably useful and does not influence other functionality.
I agree.
from opendtu.
I agree too. I've changed the IP of my ESP32 and was trying to restart the ESP to obtain a new IP from my DHCP-Server. I had to restart the ESP manually now. A restart option is an essential feature for such a device and shouldn't be a problem to implement it.
from opendtu.
#81 can now be closed, too.
from opendtu.
This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new discussion or issue for related concerns.
from opendtu.
Related Issues (20)
- Reactive power of HMS-450-1T not shown correct „VoltVar“ is activated HOT 1
- Meldungen stimmen nicht überein! HOT 3
- Mit aktivierten MQTT Verbindungsprobleme zu den Wechelrichtern HOT 1
- Random Total Yield Reduce
- [Request] Communicate "firmware update available" through MQTT / allow firmware update through HomeAssistant
- HMS-800-2T-LV not connecting to OpenDTU Fusion HOT 7
- Crash during connection attempt to MQTT broker in Azure Event Grid
- Firmware Update v24.6.29 stucks at 100% upload HOT 2
- Missing yieldday and yieldtotal on phase 1 HOT 2
- Min WIFI signal strength HOT 1
- DTU Polling Intervall Increases with more Connected Inverters HOT 1
- smart micro solar lose conection to openDTU 3 or 4 times a day HOT 4
- Faulty Sketch size reported in Info Web page HOT 4
- Lost connection to hms-1600-4t / frequency hopping HOT 10
- not possible to change the ip address HOT 10
- no return from manual ip configuration to dhcp
- Interrupt received with CMT2300A HOT 1
- HMS-800-2T HOT 9
- /api/livedata/status -> too many decimal places via web query HOT 2
- [Request] Add support for TSUN TSOL_MS2000 inverter
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from opendtu.