Comments (2)
Here is the terminal:
Processing WANHAO_I3_MINI (platform: atmelavr; framework: arduino; board: megaatmega2560)
Verbose mode can be enabled via -v, --verbose
option
CONFIGURATION: https://docs.platformio.org/page/boards/atmelavr/megaatmega2560.html
PLATFORM: Atmel AVR 2.0.0 > Arduino Mega or Mega 2560 ATmega2560 (Mega 2560)
HARDWARE: ATMEGA2560 16MHz, 8KB RAM, 248KB Flash
PACKAGES: framework-arduino-avr 5.0.0, toolchain-atmelavr 1.50400.190710 (5.4.0)
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Looking for U8G2 library in registry
Found: https://platformio.org/lib/show/942/U8g2
LibraryManager: Installing id=942
U8g2 @ 2.27.2 is already installed
Found 10 compatible libraries
Scanning dependencies...
Dependency Graph
|-- 2018.6.24
| |-- 1.0
|-- 6.13.0
|-- #a2d60bd
|-- 1.0
|-- 1.0
|-- 2.27.2
| |-- 1.0
| |-- 1.0
Building in release mode
Compiling .pio\build\WANHAO_I3_MINI\src\ClickEncoder.cpp.o
In file included from src\ClickEncoder.cpp:12:0:
include/ClickEncoder.h: In constructor 'ClickEncoder::ClickEncoder(uint8_t, uint8_t, uint8_t, uint8_t, bool)':
include/ClickEncoder.h:116:29: warning: 'ClickEncoder::doubleClickEnabled' will be initialized after [-Wreorder]
bool doubleClickEnabled = false;
^
include/ClickEncoder.h:109:31: warning: 'bool ClickEncoder::accelerationEnabled' [-Wreorder]
bool accelerationEnabled = false;
^
src\ClickEncoder.cpp:46:1: warning: when initialized here [-Wreorder]
ClickEncoder::ClickEncoder(uint8_t A, uint8_t B, uint8_t BTN, uint8_t stepsPerNotch, bool active)
^
In file included from src\ClickEncoder.cpp:12:0:
include/ClickEncoder.h:109:31: warning: 'ClickEncoder::accelerationEnabled' will be initialized after [-Wreorder]
bool accelerationEnabled = false;
^
include/ClickEncoder.h:106:28: warning: 'volatile int16_t ClickEncoder::delta' [-Wreorder]
volatile int16_t delta = 0;
^
src\ClickEncoder.cpp:46:1: warning: when initialized here [-Wreorder]
ClickEncoder::ClickEncoder(uint8_t A, uint8_t B, uint8_t BTN, uint8_t stepsPerNotch, bool active)
^
In file included from src\ClickEncoder.cpp:12:0:
include/ClickEncoder.h:113:28: warning: 'ClickEncoder::button' will be initialized after [-Wreorder]
volatile Button button = Open;
^
include/ClickEncoder.h:110:19: warning: 'uint8_t ClickEncoder::steps' [-Wreorder]
uint8_t steps = 0;
^
src\ClickEncoder.cpp:46:1: warning: when initialized here [-Wreorder]
ClickEncoder::ClickEncoder(uint8_t A, uint8_t B, uint8_t BTN, uint8_t stepsPerNotch, bool active)
^
In file included from src\ClickEncoder.cpp:12:0:
include/ClickEncoder.h:110:19: warning: 'ClickEncoder::steps' will be initialized after [-Wreorder]
uint8_t steps = 0;
^
include/ClickEncoder.h:102:17: warning: 'const uint8_t ClickEncoder::pinA' [-Wreorder]
const uint8_t pinA;
^
src\ClickEncoder.cpp:46:1: warning: when initialized here [-Wreorder]
ClickEncoder::ClickEncoder(uint8_t A, uint8_t B, uint8_t BTN, uint8_t stepsPerNotch, bool active)
^
Compiling .pio\build\WANHAO_I3_MINI\src\Config.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\DataStore.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\DuetLaserSensor.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\GCodes.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\InputDialogs.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\Menus.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\SMuFF.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\SMuFFtools.cpp.o
Compiling .pio\build\WANHAO_I3_MINI\src\SimpleGCodeParser.cpp.o
In file included from src\GCodes.cpp:28:0:
include/ZServo.h:73:12: error: 'uint32' does not name a type
volatile uint32 _pin_reg;
^
include/ZServo.h:74:3: error: 'uint32' does not name a type
uint32 _pin_set;
^
include/ZServo.h:75:3: error: 'uint32' does not name a type
uint32 _pin_reset;
^
include/ZServo.h:79:3: error: 'uint32' does not name a type
uint32 _lastUpdate;
^
include/ZServo.h:80:12: error: 'uint32' does not name a type
volatile uint32 _tickCnt;
^
src\GCodes.cpp: In function 'bool dummy(const char, String, int)':
src\GCodes.cpp:114:9: warning: unused variable 'code' [-Wunused-variable]
int code = buf.toInt();
^
In file included from src\SMuFF.cpp:23:0:
include/ZServo.h:73:12: error: 'uint32' does not name a type
volatile uint32 _pin_reg;
^
include/ZServo.h:74:3: error: 'uint32' does not name a type
uint32 _pin_set;
^
include/ZServo.h:75:3: error: 'uint32' does not name a type
uint32 _pin_reset;
^
include/ZServo.h:79:3: error: 'uint32' does not name a type
uint32 _lastUpdate;
^
include/ZServo.h:80:12: error: 'uint32' does not name a type
volatile uint32 _tickCnt;
^
src\GCodes.cpp: In function 'bool M98(const char, String, int)':
src\GCodes.cpp:191:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
In file included from src\SMuFFtools.cpp:30:0:
include/ZServo.h:73:12: error: 'uint32' does not name a type
volatile uint32 _pin_reg;
^
include/ZServo.h:74:3: error: 'uint32' does not name a type
uint32 _pin_set;
^
include/ZServo.h:75:3: error: 'uint32' does not name a type
uint32 _pin_reset;
^
include/ZServo.h:79:3: error: 'uint32' does not name a type
uint32 _lastUpdate;
^
include/ZServo.h:80:12: error: 'uint32' does not name a type
volatile uint32 _tickCnt;
^
src\Menus.cpp: In function 'void setupMainMenu(char)':
src\Menus.cpp:70:10: warning: unused variable 'items2' [-Wunused-variable]
char items2[150];
^
src\Menus.cpp: In function 'void showOffsetsMenu(char*)':
src\Menus.cpp:989:9: warning: variable 'title' set but not used [-Wunused-but-set-variable]
char* title;
^
src\SMuFFtools.cpp: In function 'bool setServoPos(int, int)':
src\SMuFFtools.cpp:1226:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
*** [.pio\build\WANHAO_I3_MINI\src\SMuFF.cpp.o] Error 1
*** [.pio\build\WANHAO_I3_MINI\src\GCodes.cpp.o] Error 1
*** [.pio\build\WANHAO_I3_MINI\src\SMuFFtools.cpp.o] Error 1
=========================================================================================================== [FAILED] Took 6.03 seconds ===========================================================================================================
Environment Status Duration
WANHAO_I3_MINI FAILED 00:00:06.033
BIGTREE_SKR_MINI IGNORED
===================================================================================================== 1 failed, 0 succeeded in 00:00:06.033 =====================================================================================================
The terminal process terminated with exit code: 1
Terminal will be reused by tasks, press any key to close it.
from smuff-1.1.
Yeah, sorry for that and for not seeing your post.
I've updated and uploaded the source code.
from smuff-1.1.
Related Issues (16)
- Use SMuFF with Klipper Firmware HOT 3
- after changing my endstop settings from high to low config file to big HOT 2
- SMuFF on Klipper and V5 build HOT 2
- Cannot compile Fysetc AIO II version HOT 10
- TWI problem HOT 7
- Not working with SKR mini E3 V1.2 HOT 19
- Klipper via macros and shell commands? HOT 1
- compiling problem HOT 3
- Firmware Compile for Artillery Ruby board HOT 1
- Is Ws2812b just optional? HOT 4
- the display does not work HOT 23
- Maybe booting failed even oled show ready! HOT 15
- firmware.bin HOT 4
- [idea] klipper HOT 4
- Compatible LCDs and support for NUCLEO-F103RB HOT 12
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from smuff-1.1.