[BUG]: Unprogrammed relays are activating randomly. about terrariumpi

[theyosh]

Have a look at https://theyosh.github.io/TerrariumPI/faq/which-files-to-backup/ and https://theyosh.github.io/TerrariumPI/faq/restoring-backup-files/ for backup and restoring your database and calendar.

[theyosh]

But if you are planning to start with a clean setup, can we close this issue? You can always reopen it when you have you setup up and running again.

[theyosh]

Are you also able to upload the logfile in the folder log? As far as I know should al sensitive date being stripped from the logfile. So you could upload it here.
Else you can also mail it to [email protected] Then I can look in the logs to see if I can find something.

The code for this relay is dead simple, so there is not much I can change to it.

Do you have other I2C hardware in use?

[theyosh]

I have not received a log file for further debugging. Else it will be hard to say what is causing this.. a log file could help a lot.

[ThunderClap86]

I apologize for the lengthy delay, I am away from my Pi at the moment and do not have it on the web to pull the log. I will be back physically at the Pi again this weekend to pull the log and upload here.

[theyosh]

Any updates?

[theyosh]

Any updates?

[ThunderClap86]

Any updates?

Having trouble with this... can't get in to pull the logs. https://github.com/theyosh/TerrariumPI/assets/105729168/153bc640-1c62-4448-8d09-57970d1fcd7e

[theyosh]

Strange. Does this also happen on a desktop browser? I guess the image was of a Android with Chrome?
And did you enter the credentials, or does the error occur before you can enter the credentials.

You can also download the logfile through ssh. It is located at /home/pi/TerrariumPI/log/terrariumpi.log WinSCP is a tool that can do it. Or FileZilla

[theyosh]

Is this still happening? I do not have other people with login errors. Without a log file I can't do anything.

Is would like to close this issue if there are no updates anymore.

[ThunderClap86]

Yes, there are issues with the login still. The relays are also still doing the activation despite being unprogrammed. My next step is to reinstall everything and start over from scratch. Perhaps this will solve it.

[ThunderClap86]

Any updates?

Do I really want to back it all up and "import" the relays acting the way they are if it's somehow a config setting I messed up? Genuine question.

[theyosh]

Good point. Than make at least a backup. So you can use a SQlite editor to read out the old values from the backup database when you reconfigure your setup.