Comments (10)
Hi @fabio-C, something must be wrong because at no point are you supposed to lauch start.sh
manually.
Why did you end up running it manually? Is the systemd process not running?
from ic880a-gateway.
After launch "install.sh" what is the next step? Does the gateway software start automatically?
from ic880a-gateway.
Yes. Install creates a systemd service, you can query the status of the service using normal systemd commands, the service is called ttn-gateway
. You can also use journalctl to check logs of that specific unit (or just grep syslog
)
from ic880a-gateway.
Closing until we get more details from @fabio-C
from ic880a-gateway.
@gonzalocasas
Greeting I'm encoutering the same problem.
This is the log I get when I run start.sh
*** Poly Packet Forwarder for Lora Gateway ***
Version: 2.1.0
*** Lora concentrator HAL library version info ***
Version: 3.1.0; Options: native;
INFO: Little endian host
INFO: found global configuration file global_conf.json, parsing it
INFO: global_conf.json does contain a JSON object named SX1301_conf, parsing SX1301 parameters
INFO: lorawan_public 1, clksrc 1
INFO: Configuring TX LUT with 16 indexes
INFO: radio 0 enabled (type SX1257), center frequency 867500000, RSSI offset -166.000000, tx enabled 1
INFO: radio 1 enabled (type SX1257), center frequency 868500000, RSSI offset -166.000000, tx enabled 0
INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 7 to 12
INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7
INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate
INFO: global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
INFO: gateway MAC address is configured to AA555A0000000000
INFO: Found 2 servers in array.
INFO: Server 0 configured to "127.0.0.1", with port up "1680" and port down "1681"
INFO: Server 1 configured to "iot.semtech.com", with port up "1680" and port down "1680"
INFO: Found 5 system calls in array.
INFO: System command 0: "df -m"
INFO: System command 1: "free -h"
INFO: System command 2: "uptime"
INFO: System command 3: "who -a"
INFO: System command 4: "uname -a"
INFO: monitor hostname or IP address is configured to "127.0.0.1"
INFO: monitor port is configured to "2008"
INFO: ghost hostname or IP address is configured to "127.0.0.1"
INFO: ghost port is configured to "1918"
INFO: downstream keep-alive interval is configured to 10 seconds
INFO: statistics display interval is configured to 30 seconds
INFO: upstream PUSH_DATA time-out is configured to 100 ms
INFO: packets received with a valid CRC will be forwarded
INFO: packets received with a CRC error will NOT be forwarded
INFO: packets received with no CRC will NOT be forwarded
INFO: GPS serial port path is configured to "/dev/ttyAMA0"
INFO: SSH path is configured to "/usr/bin/ssh"
INFO: SSH port is configured to 22
INFO: HTTP port is configured to 80
INFO: NGROK path is configured to "/usr/bin/ngrok"
INFO: Reference latitude is configured to 10.000000 deg
INFO: Reference longitude is configured to 20.000000 deg
INFO: Reference altitude is configured to -1 meters
INFO: GPS is enabled
INFO: Using fake GPS coordinates instead of real.
INFO: antenna_gain 0 dBi
INFO: Upstream data is enabled
INFO: Downstream data is enabled
INFO: Ghoststream data is disabled
INFO: Radiostream data is enabled
INFO: Statusstream data is enabled
INFO: Beacon is disabled
INFO: Monitor is disabled
INFO: Platform configured to "IMST + Rpi"
INFO: Contact email configured to "[email protected]"
INFO: Description configured to "Update me"
INFO: found local configuration file local_conf.json, parsing it
INFO: redefined parameters will overwrite global parameters
INFO: local_conf.json does not contain a JSON object named SX1301_conf
INFO: local_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
INFO: gateway MAC address is configured to AA555A000004BABA
INFO: packets received with a valid CRC will be forwarded
INFO: packets received with a CRC error will NOT be forwarded
INFO: packets received with no CRC will NOT be forwarded
INFO: GPS is enabled
INFO: antenna_gain 0 dBi
INFO: Upstream data is enabled
INFO: Downstream data is enabled
INFO: Ghoststream data is disabled
INFO: Radiostream data is enabled
INFO: Statusstream data is enabled
INFO: Beacon is disabled
INFO: Monitor is disabled
INFO: Successfully contacted server 127.0.0.1
INFO: Successfully contacted server iot.semtech.com
INFO: [main] Starting the concentrator
ERROR: [main] failed to start the concentrator
from ic880a-gateway.
@Hitheshkaranth as I said above, you're not supposed to run start manually, it runs as a service so triggering it by hand will not work as expected.
On the other hand, your log has nothing to do with the one in the original comment. What makes you think it's the same?
from ic880a-gateway.
from ic880a-gateway.
from ic880a-gateway.
from ic880a-gateway.
3.Yes but no sign of LoRa gate way turning on I viewed it on journalctl no sign of services related to lora.
If there's really no sign of ttn-gateway service on journalctl
then you have a misconfiguration. Please start on a clean image and re-install to be sure.
every time I try to run it this seems to be the error thrown up.
As I said, if you're running it manually, something is wrong in your installation, because this runs as a service.
from ic880a-gateway.
Related Issues (20)
- No connected HOT 3
- TTN V3 HOT 1
- TTN V3 Migration HOT 34
- iot.semtech.com not resolved HOT 1
- Service Error / Not Connected in the Things Network HOT 2
- ic880a installer with RAK831 concentrator board HOT 1
- how can i change the channel configuration to in865 to 867
- Gateway only gets Join Requests, but never acknowledges them
- disconnected status HOT 1
- Ask before rebooting
- Best place in Switzerland to find the iC880a board ? HOT 3
- Followed Guide but still no connection. HOT 1
- Update before migration of RPi / iC880a Gateway with ch2i backplane to TTN V3 fails
- bin
- Integration of Sensors (via Cayenne) and LEDs
- Setup in Beaglebone black HOT 1
- Invalid gps time reference
- Error: ERROR: [main] failed to start the concentrator HOT 1
- Error - mpsse.h:221: first defined here
- Errors while launching start.sh to restart the gateway HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ic880a-gateway.