pci screamer issus about pcileech

[ufrisk]

This is indicative of a successful flash, successful PCIe link but no USB link.

Can you please check that your USB cable is connected properly between the PCIeScreamer and your computer running pcileech?

[xyca23]

when i pugin the USB cable windows detect the device and installs the "FTDI FT601 USB 3.0 Bridge Device"
driver. It shows up in the device manager

The Device USB\VID_0403&PID_601F&MI_00\6&1f7b2494&0&0000 was configured.

I tried it on 2 pcs, dont got it working

edit: but there is one warning first "Device not migrated" after this "The Device USB\VID_0403&PID_601F&MI_00\6&1f7b2494&0&0000 was configured."

Led3 is on all the time

[ufrisk]

The output [0,v0.0,0000] is indicative of a problem in communicating with the FPGA board, or a wrong flash. If the USB communication was working it would show the bitstream version in that text.

Now I don't believe the flash is wrong since it seems to light up the LD1 when you press the SW3 button (which is a small text I programmed into it).

LD3 should be on at all times. That is normal.

I also assume you downloaded and put the FTD3XX.dll in the same folder as pcileech since it would give another error message otherwise.

[xyca23]

The card was broken. Got a new one. Now it works

[ufrisk]

I'm glad the issue is resolved. Thanks for letting me know. Good luck with your DMA attacking.