Comments (82)
可能是交叉编译工具不配套导致的,自己编译试试
Original comment by [email protected]
on 9 Jan 2010 at 11:50
from mentohust.
TT 完全 不会。积极联系作者中,,。。不是你弄的啊?
我以为是你
Original comment by [email protected]
on 9 Jan 2010 at 11:51
from mentohust.
貌似不能动态载入库文件,这样编译./configure --with-pcap=dylib
--disable-notify
--disable-encodepass
Original comment by [email protected]
on 9 Jan 2010 at 12:26
from mentohust.
呃。我没交叉编译环境
用你的附件 提示
mentohust: can't load library 'libpcap.so'
Original comment by [email protected]
on 9 Jan 2010 at 12:35
from mentohust.
把libpcap.so.0.9重命名为libpcap.so
Original comment by [email protected]
on 9 Jan 2010 at 12:52
from mentohust.
软连接 后
it works!!!!!
thanks ,网线有点问题。获取 不到IP
我继续折腾下,谢了。
Original comment by [email protected]
on 9 Jan 2010 at 12:58
from mentohust.
似乎openwrt里不会有dhclient,所以不能获取ip
这个程序没有必要英文化吧?
Original comment by [email protected]
on 9 Jan 2010 at 1:07
from mentohust.
搞定 了。。哇 哈哈。没有英文化
。不过用utf-8就可以了。我太兴奋 了。终于在毕业
前。。。
Original comment by [email protected]
on 9 Jan 2010 at 1:17
from mentohust.
[deleted comment]
from mentohust.
哦,获取IP怎么搞的?贴个命令或者脚本吧。
Original comment by [email protected]
on 9 Jan 2010 at 2:11
Attachments:
from mentohust.
获取IP不是软件 的问题,估计 是IP不够分了。或者
openwrt固件问题
楼上新版本?
Original comment by [email protected]
on 9 Jan 2010 at 3:58
from mentohust.
好像是dhclient的问题
貌似 8.09.1 版的更新有一点就是说更新了dhcp什么的。。。
难道openwrt 其他地方 wan口从没用到dhclient?
Original comment by [email protected]
on 10 Jan 2010 at 12:31
from mentohust.
搞定 了。。用
http://downloads.openwrt.org/kamikaze/8.09.1/brcm-2.4/openwrt-brcm-2.4-
squashfs.trx 这个固件就行了。
Original comment by [email protected]
on 10 Jan 2010 at 1:35
from mentohust.
碰到了同样的问题
ddwrt的C库没提供scanf
自已编,运行的时候 提示 Illegal instruction
不想刷固件,有人知道mipsel那个版本是谁编译的吗?
Original comment by [email protected]
on 30 Mar 2010 at 2:54
from mentohust.
就是作者咯。 我openwrt用 Comment 10 的两个包是完美解决了的。
Original comment by [email protected]
on 31 Mar 2010 at 12:56
from mentohust.
嗯,就是不想刷固件啊,毕竟有风险
知道是哪位作者吗?
我想联系一下问一下。我还是想弄一个可用的交叉编译环境��
�实在不行再刷
固件~
Original comment by [email protected]
on 31 Mar 2010 at 1:27
from mentohust.
Comment 10 by [email protected], Jan 09, 2010
就他貌似 ,你看下项目主页 ,有联系方式吧,或者直接
等他上来就好了。这个issue有update他
应该就会来。
Original comment by [email protected]
on 31 Mar 2010 at 2:14
from mentohust.
嗯,已经联系他了
谢啦~
Original comment by [email protected]
on 31 Mar 2010 at 2:42
from mentohust.
如果只是因为没有scanf函数的话,可以手工建立配置文件设置
网卡、用户名、密码,跳过该函数
的执行
Original comment by [email protected]
on 31 Mar 2010 at 5:17
from mentohust.
成功了,上传一个ddwrt下用的版本,自己编译的
与原版不同处:
1. 用fscanf,fprintf代替scanf,printf
(ddwrt的uclibc库没提供scanf和printf)
2. mentohust.conf文件默认保存到/jffs/etc/ (ddwrt下/etc不可写)
Original comment by [email protected]
on 9 Apr 2010 at 11:13
Attachments:
from mentohust.
请教各位大侠:
我用楼上的ddwrt下的menthust在无线路由下认证,用户名和密码�
��经认证成功,但提示sh:dhclient
not
found,无法获得ip。这会是什么原因呢?是不是我所用的ddwrt��
�本太旧?我用的是ddwrt08年发布的
一个mini版本。
另外,学校网络进线应当接在路由器的wan口还是lan口?我试��
�将网络进线接在wan口的情况下mentohust认
证找不到服务器。接到lan口则可以认证成功但无法获得ip。
Original comment by [email protected]
on 4 May 2010 at 6:35
from mentohust.
呃。楼上,既然
你要把路由当路由用,当然是接wan口啊。至于
。找不到认证服务器。应该是你
端口没选正确 吧。
你们学校要求动态ip吗?一定要在认证的时候 再获取
一次IP?
dhclient在wrt是没有的,但是有一个udhcpd ,你可以试试,也许
能获取到ip。
建议是:ifconfig,看清楚
哪个是wan口,eth1还是其他,然后删掉/etc/mentohust.conf
重新配置一次。dhcp方式先试试不获取
,不行的话,用二次认证配合udhcpd试试。
Original comment by [email protected]
on 5 May 2010 at 1:16
from mentohust.
我现在的情况是中兴H618B,拨号的时候找不到服务器,认证方
式和DHCP分配方式都改过,就是找不到服务
器;之前用LinkSYS的wrt-150n也试过,可以连接服务器但是报用��
�名密码错,难道是服务器的认证方式变
了?来请教下,排除认证方式选错,还有什么原因会导致找��
�到服务器,WAN口和LAN口都试过了。
Original comment by [email protected]
on 6 May 2010 at 1:26
from mentohust.
如果你校不支持锐捷私有方式(在电脑上选择该方式认证看��
�否找到服务器)
同时路由器有Bug(见http://code.google.com/p/mentohust/issues/detail?id=4
9 )的话
就找不到服务器了
至于用户名密码错误的问题,你可以抓包找找问题,不过我��
�知道路由器怎么抓,可以联系
linchen987。
Original comment by [email protected]
on 6 May 2010 at 3:18
from mentohust.
回23# 前几天一长安大的同学 用618b认证没问题。。。
路由器抓包的话。用tcpdump。
Original comment by [email protected]
on 6 May 2010 at 10:16
from mentohust.
to daigufan:
提示sh:dhclient not found
是因为mentohust默认用dhclient作为dhcp客户端的,而ddwrt下的
dhcp客户端是udhcpd,事实上,udhcpd在ddwrt下是开机默认启动的��
�所以不需要再运行dhcp客户
端了,认证成功后就能得到IP。我的做法是在mentohust认证参数
中把dhcp脚本定位到一个空的脚
本文件(里面一行 exit 0 就行)。ddwrt版本应该没问题。
网线应该是接在wlan口上的,你要确认下你的ddwrt中wlan口对应�
��的设备名,好像是在web管理
界面里vlan那项,你看一下
Original comment by [email protected]
on 6 May 2010 at 12:06
from mentohust.
谢谢#24和#25,今天回家把150n拿过来了,装同样的mentohust程序�
��可以找到服务器,但是提示:
>> 寻找服务器...
** 认证MAC: 00:d0:f8:6b:2c:e2
>> 发送用户名...
>> 发送密码...
>> 认证失败!
$$ 系统提示: ??????????!
>> 认证已退出。
我这里用H618B那个到寻找服务器那里就停了,然后报找不到服
务器,开始研究抓包了,谢谢:)
抓到的数据怎样分析呢?
Original comment by [email protected]
on 6 May 2010 at 3:03
from mentohust.
不晓得mipsel的tcpdump版本和libpcap怎么配合才能用,我现在运行
tcpdump就报
tcpdump: can't resolve symbol 'setjmp'
以前mentohust也有这种情况,装对libpcap就可以了,这个怎么也�
��不对啊
Original comment by [email protected]
on 6 May 2010 at 3:29
from mentohust.
还有个情况就是我拿其他人抓的mpf包到路由器并设置好,每��
�都报这个错误:
!! 所选文件3_30.mpf无效,改用内置数据认证。
一定要自己抓包吗?谢谢!
Original comment by [email protected]
on 6 May 2010 at 3:46
from mentohust.
回复 #25
长安大学之所以 现在v2 的能用 应该是 网络中心升级 锐捷客户端 关闭了 验证
加上验证后 应该只有支持最新的v3 才可以
Original comment by [email protected]
on 7 May 2010 at 1:54
from mentohust.
re 27
把你的终端编码设置成GBK的再运行程序看看那个提示究竟是��
�么
Original comment by [email protected]
on 7 May 2010 at 4:17
from mentohust.
re 31
的确是这个问题,终端下mentohust中文显示不正常就改成UTF-8转
GB了,不改,直接用终端,虽然其他提示
是乱码,但返回正确了,欧也!谢谢作者们了!
终于搞定,用的LinkSYS
WRT-150n,交换芯片是BCM5325,这样也证明了那个路由器广播包��
�BUG在这个芯
片上不存在哈;只是H618B(BCM5354)连服务器的组播包都收不��
�就不清楚了,不知道长安大学那个能通过
认证的是什么情况?怎么收到组播包的?还是我刷的dd固件有
问题?
Original comment by [email protected]
on 7 May 2010 at 2:31
from mentohust.
10#
坛主放的版本用上两天了,家属区的认证一直都正常,昨天��
�实验室测试的时候几分钟一断,当时有事不
在没有查原因,今天从上午到现在都没有问题,只是无线部��
�在高带宽下载(1MB/s)一段时间后会断掉,这
个时候路由器没有重启,有线网部分也没有问题,网上搜了��
�下,说是ksoftirqd_CPU0进程CPU占用过高,
确实这个进程跟无线流量有关系,无线断掉的时候已经20%左��
�的样子了,这个应该是DD-WRT的问题了。
说这么多,就是感谢下开发团队,现在已经很爽的用上mentohus
t在路由器上,比原来用PC做路由低碳了哈!
Original comment by [email protected]
on 11 May 2010 at 8:54
from mentohust.
补充下,昨天在实验室跑了一天了,今天早上来没有发现问��
�,也没有断过网,估计第一次试的时候装完程序
配置好路由没有重启,谢谢了!
Original comment by [email protected]
on 12 May 2010 at 1:10
from mentohust.
补一句,在10.03下无法安装这个ipk,提示architecture不兼容,貌
似是因为libpcap升到了1.02
的关系
有办法忽略这个错误么?
Original comment by [email protected]
on 16 May 2010 at 3:37
from mentohust.
直接将文件解压出来复制?
Original comment by [email protected]
on 16 May 2010 at 4:01
from mentohust.
35#,10.03是mipsel的版本吗?看上去不象啊
Original comment by [email protected]
on 17 May 2010 at 2:50
from mentohust.
OpenWRT 10.03
Original comment by [email protected]
on 17 May 2010 at 3:06
from mentohust.
38# 我装的DD-WRT,你把libpcap_0.9.8-1_mipsel.ipk 装了吗?
Original comment by [email protected]
on 18 May 2010 at 8:25
from mentohust.
[email protected],
可以 编译一个 最新版支持 v3的 mipsel版 的mentohust
谢谢
Original comment by [email protected]
on 19 May 2010 at 5:43
from mentohust.
不可以
Original comment by [email protected]
on 19 May 2010 at 6:32
from mentohust.
为什么呢
Original comment by [email protected]
on 19 May 2010 at 8:57
from mentohust.
学校开启V3就是为了防止同学共享上网,mentohust是为了解决Lin
ux下校园网认证困难的问题,
不是帮助使用路由共享上网。
Original comment by [email protected]
on 19 May 2010 at 10:34
from mentohust.
我也不是为了 共享上网 只是 自己的手机无法 wifi上网
,万般无奈, 我的手机是android 系统的 ,理论
是不是可以编译一个这个系统 用的mentohust呢
Original comment by [email protected]
on 19 May 2010 at 2:46
from mentohust.
[email protected]
说得也对哈,道德上讲确实不该破解学校的收费政策,支持��
�下
不过从理论上讲,除开linux路由,还有不少方法可以实现44#的
要求哈,比如用那种低功耗工控板搭硬件平
台,软件就用官方锐捷和softether的话,也是可以共享的吧?V3
的协议不清楚哈,不知道这种方法有没有可
行性。
从我们学校的情况来说,实验室办公楼和家属区都要交网费��
�,学生区都是免费用网络的,个人觉得家属区用
的话,一般都是自己的网络自己多种终端需要联网,路由一��
�也没有什么错。锐捷认证还有一个很不方便的地
方就是很多实验室需要上网升级杀毒软件,但是实验过程并��
�用上网的,如果每台机器因为这个要求要装锐捷
还要收费的话,肯定大家都是不干的,学校把这些实验室的��
�况考虑到就好了。
还好我们现在还用V2认证,说6.1升级3.73,不知道会不会把V3一
起升了,川大。
Original comment by [email protected]
on 19 May 2010 at 3:56
from mentohust.
纠正一下,并非不是V3就是V2,有些是可以用xrgsu(可能限制��
�旧的Win版,直接认证即可成
功),有些是对版本有限制(仅通过-v参数指定版本号可以认
证成功的情况),有些是开启V2校
验(-v失败但仅复制8021x.exe可以成功的情况),有些是V3早期�
��验(需要复制8021x.exe和
W32N55.dll),有些是V3后期校验(需要复制3个文件)。
Original comment by [email protected]
on 20 May 2010 at 2:23
from mentohust.
45# 自动升到1.02了
同学你是川大的?我准备暑假回家的时候把路由拿回家用
川大还在用v2么
Original comment by [email protected]
on 20 May 2010 at 4:48
from mentohust.
回47#,网管说6.1要升级客户端到3.73,到时候我测一下能不能�
��证再看吧
Original comment by [email protected]
on 21 May 2010 at 7:22
from mentohust.
mentohust
在长安大学徹底用不成了,锐捷升级到了4.21,v3般本提示
客戶端不完整 直接加入黑
名单 linux 是 玩不成了
Original comment by [email protected]
on 21 May 2010 at 12:19
from mentohust.
48# 效果如何?
Original comment by [email protected]
on 1 Jun 2010 at 3:38
from mentohust.
50# 目前使用正常,家里和实验室都没有问题。
一起感谢Mentohust团队吧:)
Original comment by [email protected]
on 1 Jun 2010 at 5:41
from mentohust.
我把mipsel版本的mentohust放到Tomato里面,为什么运行时出现Segme
ntation fault?
Original comment by [email protected]
on 17 Jul 2010 at 1:42
from mentohust.
编译mipsel版本时libpcap应该采用静态或动态链接,不能用动态�
��入,即编译参数推荐为
--disable-encodepass --disable-arp --disable-notify --with-pcap=dylib
--disable-nls
Original comment by [email protected]
on 18 Jul 2010 at 2:00
from mentohust.
想问一下如何改代码让metohust变成daemon模式?
Original comment by [email protected]
on 22 Jul 2010 at 9:33
from mentohust.
-b 是否后台运行: 0(否) 1(是,关闭输出) 2(是,保留输出)
3(是,输出到文件/tmp/mentohust.log) [默认0]
所以,mentohust -b3 -w运行一遍以后直接mentohust
或者每次都以mentohust -b3的方式运行。
要修改代码来修改默认值的话,修改myconfig.c里的宏定义
#define D_DAEMONMODE 0 /* 默认daemon模式 */
Original comment by [email protected]
on 22 Jul 2010 at 2:28
from mentohust.
谢谢#55的技术支持,已经搞定,现在还想静态编译,发现缺��
�libpcap和libnet,如何写./configure?
Original comment by [email protected]
on 23 Jul 2010 at 1:22
from mentohust.
mentohust不需要libnet,推荐使用libpcap0.9.8,这个版本既有mentohust�
��需要的全部函数,编译后的体积也比高版本小
并且推荐仅仅是静态链接而不是静态编译,因为静态编译实��
�是没必要
编译libpcap时注意设置(libpcap的)--with-pcap=linux,别听网上某�
��人说的在configure里注释代码
静态链接的话(mentohust的)--with-pcap=stlib并将编译出来的libpca
p.a放到src目录
或者直接--with-pcap=libpcap.a路径
附件中是用GCC_VERSION=3.4.6 UCLIBC_VERSION=0.9.29
内核2.4.35.4的编译器编译出来的
Original comment by [email protected]
on 23 Jul 2010 at 2:51
Attachments:
from mentohust.
啊,非常感谢,但我之前用网上mipsel版mentohust确实要加libnet.s
o才能正常运行,很诡异,估计是 libpcap需要吧?
Original comment by [email protected]
on 23 Jul 2010 at 5:04
from mentohust.
杯具,严重问题,我编译的mentohust无法在DD和TT上运行,分析上��
�的mento发现是GCC3.0编译的,请问是用crosstool编译的吗?我的cr
osstool是gcc-3.2.3-glibc-2.2.5-linux-2.4.26的,编译的crosstool是mipsel-un
known-linux-gnu的……救命啊,怎么回事,是不是要换成linux-2.4.30?
Original comment by [email protected]
on 23 Jul 2010 at 9:56
from mentohust.
[email protected],你一直是用2.4.35.4内核编译mipsel的成功吧~如�
��是哥也得改crosstool了...
Original comment by [email protected]
on 23 Jul 2010 at 9:59
from mentohust.
一直用的是OpenWRT bcrm2.4里的sdk编译的
http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/
你的路由器用的是哪个版本的固件?我换个新sdk编译试试
Original comment by [email protected]
on 23 Jul 2010 at 10:02
from mentohust.
不是你编译的不能运行,而是我用crosstool-0.43搭建的mipsel平台��
�译的mentohust无法运行,我的DD是v24_mega_generic的。再次重复我�
��crosstool是gcc-3.2.3-glibc-2.25-linux-2.4.26工具链。
Original comment by [email protected]
on 24 Jul 2010 at 6:57
from mentohust.
杯具,换了crosstool的工具链:gcc-3.2.3-glibc-2.2.5-linux-2.4.30
,但是的好奇怪,静态编译的都不行.出现错误:
root@DDWRT#: mentohust
-sh: mentohust: not found
都不知道哪里出问题了,附上问题程序,请[email protected]过�
��!
Original comment by [email protected]
on 26 Jul 2010 at 5:02
Attachments:
from mentohust.
另,如何使用OpenWRT_SDK编译mentohust?
Original comment by [email protected]
on 26 Jul 2010 at 6:24
from mentohust.
[deleted comment]
from mentohust.
$ export PATH=$PATH:'/opt/mipsel/bin' #导入编译器路径
$ cd mentohust-0.3.4 #转到目录
$ ./configure --host=mipsel-linux --disable-encodepass --disable-arp
--disable-notify --disable-nls --with-pcap=dylib #配置
$ make #编译
$ sstrip src/mentohust #减小体积
Original comment by [email protected]
on 29 Aug 2010 at 7:57
from mentohust.
mips平台(比如TP-link 941N v4 或者841N v5
用的AR7240处理器)的用这个版本的mentohust吧:
Original comment by [email protected]
on 3 Sep 2010 at 9:22
Attachments:
from mentohust.
先chmod 755 mentohust,运行时需指定网卡,比如./mentohust -uusername
-ppassword -neth0
,同时注意选择dhcp和组播方式,以及是否后台运行。
Original comment by [email protected]
on 3 Sep 2010 at 10:10
from mentohust.
68 by [email protected] 你的mentohust 310kb的还需要libpcap么
用在TP-Link 941 V4可以用吗 固件是DDWRT 还是OPENWRT 还是通用
如何联系你 我应经刷挂一台了 希望指点下
Original comment by [email protected]
on 5 Sep 2010 at 5:50
from mentohust.
[deleted comment]
from mentohust.
TP-link 941N v4 用的AR7240,4MB flash,32MB内存,刷这个固件
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/08-12-10-r14929/tplink_tl-wr9
41ndv4/
我试过,可以成功刷,没有问题。
这个mentohust编译的时候已经静态连接的libpcap,无需再搞libpcap
。由于用的1.1.1的libpcap所以体积略大,这个里面的附件是0.9.8
的libpcap又重新编译的一个
我的邮箱是[email protected]
Original comment by [email protected]
on 5 Sep 2010 at 2:29
Attachments:
from mentohust.
[url=mailto:administrator@ubuntu:~$]administrator@ubuntu:~$[/url] sudo mentohust
欢迎使用MentoHUST 版本: 0.3.0
Copyright (C) 2009 HustMoon Studio
人到华中大,有甜亦有辣。明德厚学地,求是创新家。
Bug report to http://code.google.com/p/mentohust/issues/list
** 网卡[1]: ���
** 您选择了第[1]块网卡。
?? 请输入用户名: a
?? 请输入密码: c
** 用户名: a
** 网卡: ���
** 网关地址: 0.0.0.0
** DNS地址: 0.0.0.0
** 认证超时: 8秒
** 响应间隔: 30秒
** 失败等待: 15秒
** 组播地址: 标准
** DHCP方式: 不使用
** 通知超时: 5秒
!! 在网卡���上获取MAC失败!
>> 认证已退出。
[url=mailto:administrator@ubuntu:~$]administrator@ubuntu:~$[/url]
Original comment by [email protected]
on 9 Sep 2010 at 6:51
from mentohust.
怎么办啊
Original comment by [email protected]
on 9 Sep 2010 at 6:51
from mentohust.
[email protected]
您好,想请教一下,tplink的路由器刷ddwrt固件,有没有jffs呢��
�mentohust文件放到哪里?是不是自己编译到固件一起呢?谢谢�
��!
Original comment by [email protected]
on 5 Mar 2011 at 1:08
from mentohust.
71和67提供的mentohust在这里也有下载,文件完全相同,不知道�
��初是谁编译的http://code.google.com/p/publicwrt/wiki/TL_WR941N
我的硬件是tp-link wr841n v7,这两个程序在dd
wrt上可以运行,但是使用libpcap1.1的无法在openwrt运行,求解释
另外,请问这个mentohust能制定验证数据包么?我试了好像不��
�?
Original comment by [email protected]
on 9 Mar 2011 at 7:32
from mentohust.
可以定制数据包,参看http://code.google.com/p/publicwrt/wiki/Mentohust_
Client 针对自定义数据文件的用户
Original comment by [email protected]
on 9 Mar 2011 at 8:56
from mentohust.
Re:C76,我试了文中的方法,
把数据包放在/tmp/mentohust.mpf,然后加上-f参数,还是不行啊!
用-f/tmp/mentohust.mpf也不行,是我的方法有问题还是?
Original comment by [email protected]
on 12 Mar 2011 at 12:48
from mentohust.
我也贴一个我能用的出来,自己编译的,我的路由是DIR-615-D
整合libpcap0.9.8,自动搜索配置文件/jffs/etc/mentohust.conf和/tmp/roo
t/mentohust.conf
删掉了scanf,只能通过配置文件或者运行参数来配置拨号
Original comment by [email protected]
on 23 Mar 2011 at 10:44
Attachments:
from mentohust.
运行环境是DD-WRT
Original comment by [email protected]
on 23 Mar 2011 at 10:45
from mentohust.
dir615-d的能编译进固件里面吗?官网的那个firmware-mod-kit用不��
�。。
Original comment by [email protected]
on 3 Apr 2011 at 2:29
from mentohust.
Original comment by [email protected]
on 21 May 2011 at 10:42
- Changed state: Done
from mentohust.
请问wrt54g的那个bin文件可以用在 wrt54g v4的路由上吗
Original comment by [email protected]
on 15 Feb 2012 at 5:39
from mentohust.
Related Issues (20)
- 是不是archlinux 不能动态认证呢 HOT 3
- 我想问下锐捷能不能通过路由器,或者实现的可能性有多大?? HOT 4
- 不能连接 HOT 1
- 华南农业大学的BT更新,导致现登录提示客户端太旧,认证不了,怎么办呀 HOT 4
- mentohust求助 HOT 1
- mentohust适用于3.95版本的锐捷吗?你能帮我们做一个3.95的抓包吗? HOT 4
- 交叉编译 HOT 8
- 前天还可以认证,今天就悲剧了 HOT 1
- 谢谢mentohuster的努力, HOT 1
- mipsel版本mentohust的问题 HOT 7
- 安农大(锐捷3.54)Ubuntu下用Mentohust完美认证,成功上网! HOT 1
- 关于windows 2.4版的源码 HOT 23
- HELP!赛尔认证失败 HOT 8
- 请教下Mentohust源码版本跟锐捷官方版本有无对应关系呢? HOT 7
- 锐捷更改mac能否认证 HOT 3
- 如果能搞个带GUI的版本就好了 HOT 3
- 赛尔网认证不成功 HOT 8
- sun solaris HOT 2
- !! 打开libpcap失败,请检查是否已安装该库文件 HOT 18
- mac下修改认证 HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from mentohust.