ArchWSL Install not working under Windows 10 Enterprise 1803 - build 17134.228 about archwsl

[yuk7]

Does the nameservers work?
Have you launched Arch.exe while connected to the Internet?
WSL instances generates resolv.conf at them startup.

Please tell me cat /etc/resolv.conf output.

Thanks.

[mdwhitis]

[root@XFactor ~]# cat /etc/resolv.conf # This file was automatically generated by WSL. To stop automatic generation of this file, remove this line. nameserver 10.128.128.128 nameserver fec0:0:0:ffff::1 nameserver fec0:0:0:ffff::2

…

On 8/20/2018 6:39 PM, yuk7 wrote: |cat /etc/resolv.conf|

[yuk7]

Ok. It seems that resolv.conf was generated correctly.
Is the computer connected to the internet?
Please excute these line in Arch shell:

ping 8.8.8.8 -c 4
ping www.google.com -c 4

[mdwhitis]

[root@XFactor ~]# ping mirrors.kernel.org -c 4 ; curl https://mirrors.kernel.org -o /dev/null PING mirrors.pdx.kernel.org (198.145.21.9) 56(84) bytes of data. 64 bytes from mirrors.pdx.kernel.org (198.145.21.9): icmp_seq=1 ttl=54 time=26.5 ms 64 bytes from mirrors.pdx.kernel.org (198.145.21.9): icmp_seq=2 ttl=54 time=28.2 ms 64 bytes from mirrors.pdx.kernel.org (198.145.21.9): icmp_seq=3 ttl=54 time=27.5 ms 64 bytes from mirrors.pdx.kernel.org (198.145.21.9): icmp_seq=4 ttl=54 time=29.4 ms

…

--- mirrors.pdx.kernel.org ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 6ms rtt min/avg/max/mdev = 26.514/27.901/29.354/1.045 ms   % Total    % Received % Xferd  Average Speed   Time    Time Time  Current                                  Dload  Upload   Total   Spent Left  Speed   0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0 curl: (35) OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to mirrors.kernel.org:443 [root@XFactor ~]#

On 8/20/2018 7:29 PM, yuk7 wrote: |ping mirrors.kernel.org -c 4 curl https://mirrors.kernel.org -o /dev/null|

[mdwhitis]

I fixed it. Here's what I did, as root.

mkdir /mnt/c/ProgramData/ssh
cp /mnt/c/Windows/System32/OpenSSH/sshd_config_default /mnt/c/ProgramData/ssh/sshd_config
sshd.exe

[yuk7]

ok.

[wim07101993]

Hello, I have the same problem. I copied the sshd config as stated in the solution, but now i get a "Privilege separation user sshd does not exist" from sshd.exe...
Still an empty response from server with pacman.

[wim07101993]

Never mind, Kaspersky is not happy with WSL

[Sicks3c]

Had the same issue
Solved it with
sudo pacman -Syu i3
Putting that here in case someone needs it