zengyee / docker-radicale

:calendar: Docker image for Radicale calendar and contact server + security :closed_lock_with_key: + addons :rocket:

Docker-Radicale

Enhanced Docker image for Radicale, the CalDAV/CardDAV server.

Features

• 🔐 Secured: the container is read-only, with only access to its data dir, and without extraneous privileges
• 🔥 Safe: run as a normal user (not root)
• 🏗️ Multi-architecture: run on amd64, arm64 and armv7 (Raspberry Pi, ...)
• ✨ Batteries included: git included for versioning and Pytz/tz-data for proper timezone handling

Changelog

📃 See CHANGELOG.md

Latest version

Running

Option 1: Basic instruction

docker run -d --name radicale \
    -p 5232:5232 \
    -v ./data:/data \
    tomsquest/docker-radicale

Option 2: Recommended, Production-grade instruction (secured, safe...) 🚀

This is the most secured instruction:

docker run -d --name radicale \
    -p 127.0.0.1:5232:5232 \
    --init \
    --read-only \
    --security-opt="no-new-privileges:true" \
    --cap-drop ALL \
    --cap-add CHOWN \
    --cap-add SETUID \
    --cap-add SETGID \
    --cap-add KILL \
    --pids-limit 50 \
    --memory 256M \
    --health-cmd="curl --fail http://localhost:5232 || exit 1" \
    --health-interval=30s \
    --health-retries=3 \
    -v ./data:/data \
    tomsquest/docker-radicale

A Docker compose file is included.

Note on capabilities:

• CHOWN is used to restore the permission of the data directory. Remove this if you do not need the chown to be run (see below)
• SETUID and SETGID are used to run radicale as the less privileged radicale user (with su-exec), and are required.
• KILL is to allow Radicale to exit, and is required.

Custom configuration

To customize Radicale configuration, first get the config file:

• (Recommended) use this repository preconfigured config file,
• Or, use the original Radicale config file and:
  1. set hosts = 0.0.0.0:5232
  2. set filesystem_folder = /data/collections

Then:

1. create a config directory (eg. mkdir -p /my_custom_config_directory)
2. copy your config file into the config folder (eg. cp config /my_custom_config_directory/config)
3. mount your custom config volume when running the container: -v /my_custom_config_directory:/config:ro. The :ro at the end make the volume read-only, and is more secured.

Volumes versus Bind-Mounts

This section is related to the error message chown: /data: Permission denied.

With Docker volumes, and not bind-mounts like shown in the examples above, you may need to disable the container trying to make the data directory writable.

This is done with the TAKE_FILE_OWNERSHIP environment variable.
The variable will tell the container to perform or skip the chown instruction.
The default value is true: the container will try to make the data directory writable to the radicale user.

To disable the chown, declare the variable like this:

docker run -d --name radicale tomsquest/docker-radicale \
    -e "TAKE_FILE_OWNERSHIP=false"

Running with Docker compose

A Docker compose file is included. It can also be extended.

Multi-architecture

The correct image type for your architecture will be automatically selected by Docker, whether it is amd64, arm64 or armv7 (Raspberry Pi).

Extending the image

The image is extendable, as per Docker image architecture. You need to create your own Dockerfile.

For example, here is how to add RadicaleIMAP (authenticate by email) and RadicaleInfCloud (an alternative UI) to the image.

Please note that the radicale-imap plugin is not compatible with Radicale 3.0 anymore!

First, create a Dockerfile.extended (pick the name you want) with this content:

FROM tomsquest/docker-radicale

RUN python3 -m pip install git+https://github.com/Unrud/RadicaleIMAP
RUN python3 -m pip install git+https://github.com/Unrud/RadicaleInfCloud

Then, build and run it:

docker build -t radicale-extended -f Dockerfile.extended .
docker run --name radicale-extended -p 5232:5232 radicale-extended

Versioning with Git

Radicale supports a hook which is executed after each change to the CalDAV/CardDAV files. This hook can be used to keep a versions of your CalDAV/CardDAV files through git.

This image provides git to support this feature.

Refer to the official documentation of Radicale for the details.

Custom User/Group ID for the data volume

You will certainly mount a volume to keep Radicale data between restart/upgrade of the container. But sharing files from the host, and the container can be problematic. The reason is that radicale user in the container does not match the user running the container on the host.

To solve this, this image offers four options (see below for details):

• Option 0: Do nothing, permission will be fixed by the container itself
• Option 1: Create a user/group with id 2999 on the host
• Option 2: Force the user/group ids on docker run
• Option 3: Build the image with a custom user/group

Option 0: Do nothing, permission will be fixed by the container itself

When running the container with a /data volume (eg. -v ./data:/data), the container entrypoint will automatically fix the permissions on /data.

This option is OK, but not optimal:

• Ok for the container, as inside the container, the radicale user can read and write its data
• But on the host, the data directory will then be owned by the user/group 2999:2999

Option 1: Create a user/group with id 2999 on the host

The image creates a user and a group with Id 2999 in the container.
You can create an user/group on your host matching this Id.

Example:

# On your host
sudo addgroup --gid 2999 radicale
sudo adduser --gid 2999 --uid 2999 --shell /bin/false --disabled-password --no-create-home radicale

Option 2: Force the user/group ids on docker run

The user and group Ids used in the container can be overridden when the container is run.
This is done with the UID and GID env variables, eg. docker run -e UID=123 -e GID=456 ....
This will force all operations to be run with this UID/GID.

⚠️ The --read-only run flag cannot be used in this case. Using custom UID/GID tries to modify the filesystem at runtime but this is made impossible by the --read-only flag.

Option 3: Build the image with a custom user/group

You can build the image with custom user and group Ids and still use the --read-only flag.
But, you will have to clone this repo, do a local build and keep up with changes of this image.

Usage: docker build --build-arg=BUILD_UID=5000 --build-arg=BUILD_GID=5001 ....

BUILD_UID and BUILD_GID are also supported as environment variables to work around a problem on some Synology NAS. See this PR#68.

Tags

The image is tagged with this scheme:

Version number = Architecture + '.' + Radicale version + '.' + This image increment number

Example:

• tomsquest/docker-radicale:amd64.3.0.6.3
• tomsquest/docker-radicale:arm64.3.0.6.3

The last number is ours, and it is incremented on new release. For example, 2.1.11.2 made the /config readonly (this is specific to this image).

Contributing

To run the tests:

1. pip install pipenv
2. pipenv install -d
3. pytest -v

Releasing

1. Create a Git tag, eg. 3.0.6.0, push it and the CI will build the images and publish them on Docker hub
2. Update the latest tag

Example instructions :

# Update local tags
git fetch --all --tags
# Create tag
TAG=3.0.6.0 && git tag $TAG && git push origin $TAG
# Update latest tag
git push --delete origin latest && git tag -d latest && git tag latest && git push origin latest

Contributors

• flixhsw: support armv7 (Raspberry) and simplify the CI using Docker Buildx
• hecd: fix to run su-exec only when the actual user is root
• Jake Mayeux: change "data" folder to ./data instead of ~/radicale/data in docker-compose.yml and doc
• Thomas: reduce image size (/root/.cache) and Alpine upgrade
• Bernard Kerckenaere: check for read-only container, and help for volumes versus bind-mounts
• Dylan Van Assche: hook to read/write to a Git repo
• Adzero: override build args with environment variables
• Robert Beal: fixed/configurable userId, versioning...
• Loader23: config volume idea
• Waja: less layers is more, InfCloud integration (UI for Radicale)
• Christian Burmeister: add tzdata to be able to specify timezone
• Silas Lenz: add pytz for recurring events
• Enno Richter: bcrypt support
• Andrew u frank: house-cleaning of whitespaces in doc
• Marcus Kimpenhaus: fix for Alpine and https
• Thomas Queste: initial image