zhangzc11 / lysosipm

LYSOSiPM

Geant4 simulation of 12x12x3mm LYSO + SiPM response to MIP particles

=============================

setup

cd ..
mkdir LYSOSiPM-build
cd LYSOSiPM-build
cmake ../LYSOSiPM
make -j8
./LYSOSiPM

---

How to install Geant4

1. download the source files and unzip to /YourPath/geant4_10_04 https://geant4.web.cern.ch/support/download (ZIP format)

2. do the following:

cd /YourPath/
mkdir geant4_10_04-build
mkdir geant4_10_04-install
cd geant4_10_04-build
cmake -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_USE_GDML=ON -DGEANT4_USE_QT=ON -DGEANT4_INSTALL_DATA=ON -DCMAKE_INSTALL_PREFIX=/YourPath/geant4_10_04-install /YourPath/geant4_10_04
make -j8 
make install

most likely it will complain about some missing libraries, for example exerces, for ubuntu, i do this:

sudo apt-get install libxerces-c-dev
sudo apt-get install libxerces-c-doc
sudo apt-get install libxerces-c-samples

3. then you should be able to use your geant4 by source the following file:

/YourPath/geant4_10_04-install/share/Geant4-10.4.0/geant4make/geant4make.sh

Good Luck!