zuwenz Goto Github PK

actions-openwrt

Build OpenWrt using GitHub Actions | 使用 GitHub Actions 云编译 OpenWrt

actions-openwrt-passwall

Actions使用Lienol-OpenWrt源码编译含passwall服务固件

ardupilot

ArduPlane, ArduCopter, ArduRover source

axidraw

Software for the AxiDraw drawing machine

beremiz_public_dist

blunoaccessoryshielddemo

Through this demo You can use the BLUNO to connect with the mobile device and Accessory shield to show the demo.

codecombat

Game for learning how to code.

esp3d

FW for ESP8266/ESP8285/ESP32 used with 3D printer- beta state - ready for testing

espramps

grbl-advanced

Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411 Nucleo Board. Now with backlash compensation!

grbl-plotter

A GCode sender for up to two GRBL controller. SVG, DXF import. 4th axis support.

grbl_esp32

A port of Grbl CNC Firmware for ESP32

grblcontroller

Compact android mobile application for gcode streaming and controlling a cnc machine with grbl firmware

highpower-mechaduino

Mechaduino derivative which drives up to 10A, drawn using KiCad

ide4plc

A libre Programming Software for PLC comply with IEC 61131-3

iec-checker

Static analysis of IEC 61131-3 programs

iec-runtime

IEC61131-3 runtime system based on xenomai

iec611313antlrparser

Parser library for parsing IEC61131-3 ST and TIAOpeness SCL, STL code, using ANTLR4.

il_parser

IEC61131-3 IL parser (edition 3.0 2013-02)

mks-tft

MKS TFT32/28 alternative firmware

nano_stepper

Stepper feedback controller

nema23-hyperstepper

Open source hardware - NEMA23 closed-loop stepper motor and driver

p-net

PROFINET device stack for embedded devices

panelduefirmware

Firmware for the PanelDue touch screen for 3D printers

smoothie2

(Attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.

smoothiebrainz

Smoothieboard based minimal CNC controller

smoothieware

Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++

softplc_ide

A simple IDE where you can write a PLC program, and compile it into a C program which can run on a emmbeding system.

stm32f103_plc_code

tridenttd_easyfreertos32

TridentTD_EasyFreeRTOS32 Library - TridentTD 's Multitasking for ESP32