Official Repository for Melting Pot Contest Experiments
NOTE: This repository provides a basic startup code for training RLLIB agents on Melting Pot. We plan to add additional support including more examples, benchmarked configs and GCP compute setup over the next couple of weeks. We will also make any necessary updates based on feedback from participants. Hence, it is recommended to sync up your fork every few days for next couple of weeks. We will post in discussion forums about any updates as they become available.
- Substrates and Scenarios
- Installation Guidelines
- Run Training
- Run Evaluation
- Code Structure
- How to Guide
- Identified Issues with Ray 2.6.1
For this contest, we will focus on following 4 substrates and we list the corresponding validation scenarios that your submission will be evaluated on during development phase:
| Substrate | Scenarios |
|---|---|
| allelopathic_harvest__open | allelopathic_harvest__open_0 |
| allelopathic_harvest__open_1 | |
| allelopathic_harvest__open_2 | |
| clean_up | clean_up_2 |
| clean_up_3 | |
| clean_up_4 | |
| clean_up_5 | |
| clean_up_6 | |
| clean_up_7 | |
| clean_up_8 | |
| prisoners_dilemma_in_the_matrix__arena | prisoners_dilemma_in_the_matrix__arena_0 |
| prisoners_dilemma_in_the_matrix__arena_1 | |
| prisoners_dilemma_in_the_matrix__arena_2 | |
| prisoners_dilemma_in_the_matrix__arena_3 | |
| prisoners_dilemma_in_the_matrix__arena_4 | |
| prisoners_dilemma_in_the_matrix__arena_5 | |
| territory__rooms | territory__rooms_0 |
| territory__rooms_1 | |
| territory__rooms_2 | |
| territory__rooms_3 |
The baseline codes and accompanying MeltingPot installation has been tested on MacOS with support for x86_64 platform. If you use newer M1 chips, there may be additional steps required. You are welcome to post in discussion forums if you encounter any issues with installation.
It is recommended to use virtual environments as the setup requires specific versions for some libraries. Below, we provide installation with Conda package manager.
git clone <this-repo>
cd <repo-home>
conda create -n mpc_main python=3.10
conda activate mpc_main
SYSTEM_VERSION_COMPAT=0 pip install dmlab2d
pip install -e .
sh ray_patch.sh
Coming Soon!
python baselines/train/run_ray_train.py [OPTIONS]
OPTIONS:
-h, --help show this help message and exit
--num_workers NUM_WORKERS
Number of workers to use for sample collection. Setting it zero will use same worker for collection and model training.
--num_gpus NUM_GPUS Number of GPUs to run on (can be a fraction)
--local If enabled, init ray in local mode.
--no-tune If enabled, no hyper-parameter tuning.
--algo {ppo} Algorithm to train agents.
--framework {tf,torch}
The DL framework specifier (tf2 eager is not supported).
--exp {pd_arena,al_harvest,clean_up,territory_rooms}
Name of the substrate to run
--seed SEED Seed to run
--results_dir RESULTS_DIR
Name of the wandb group
--logging {DEBUG,INFO,WARN,ERROR}
The level of training and data flow messages to print.
--wandb WANDB Whether to use WanDB logging.
--downsample DOWNSAMPLE
Whether to downsample substrates in MeltingPot. Defaults to 8.
--as-test Whether this script should be run as a test.
For torch backend, you may need to prepend the above command with CUDA_VISIBLE_DEVICE=[DEVICE IDs] if your algorithm does not seem to find GPU when enabled.
python baselines/evaluation/evaluate.py [OPTIONS]
OPTIONS:
-h, --help show this help message and exit
--num_episodes NUM_EPISODES
Number of episodes to run evaluation
--eval_on_scenario EVAL_ON_SCENARIO
Whether to evaluate on scenario. If this is False, evaluation is done on substrate
--scenario SCENARIO Name of the scenario. This cannot be None when eval_on_scenario is set to True.
--config_dir CONFIG_DIR
Directory where your experiment config (params.json) is located
--policies_dir POLICIES_DIR
Directory where your trained policies are located
--create_videos CREATE_VIDEOS
Whether to create evaluation videos
--video_dir VIDEO_DIR
Directory where you want to store evaluation videos
.
├── meltingpot # A forked version of meltingpot used to train and test the baselines
├── setup.py # Contains all the information about dependencies required to be installed
└── baselines # Baseline code to train RLLib agents
├── customs # Add custom policies and metrics here
|── evaluation # Evaluate trained models on substrate and scenarios locally
├── models # Add models not registered in Rllib here
|── tests # Unit tests to test environment and training
├── train # All codes related to training baselines
|__configs.py # Modify model and policy configs in this file
|── wrappers # Example code to write wrappers around your environment for added functionality
The trained models will be available in the results folder configured by you. Please refer to the guidelines on AICrowd submision-starter-kit to make a submission using the trained checkpoints.
python baselines/train/render_models.py [OPTIONS]
OPTIONS:
-h, --help show this help message and exit
--config_dir CONFIG_DIR
Directory where your experiment config (params.json) is located
--policies_dir POLICIES_DIR
Directory where your trained policies are located
--horizon HORIZON No. of environment timesteps to render models
You can also generate videos of agents behavior in various scenarios during local evaluation.
To do this, set create_videos=True and video_dir='<PATH to video directory>' while running evaluation.
If eval_on_scenario=False, this will create video plays of evaluation on substrate.
python baselines/evaluation/evaluate.py --create_videos=True --video_dir='' [OPTIONS]
Note: The script for generating these videos is located in VideoSubject class in meltingpot/utils/evaluation/evaluation.py. Modify this class to play with video properties such as codec, fps etc. or use different video writer. If you do not use meltingpot code from this repo, we have found that the generated videos are rendered very tiny. To fix that, add rgb_frame = rgb_frame.repeat(scale, axis=0).repeat(scale, axis=1) after line 88 to extrapolate the image, where we used scale=32.
You can use either Wandb or Tensorboard to log and visualize your training landscape. The install setup provided includes support for both of them.
To setup Wandb:
- Create an account on Wandb website
- Get the API key from your account and set corresponding environment variable using
export WANDB_API_KEY=<Your Key> - Enable Wandb logging during training using
python run_ray_train.py --wandb=True
To visualize your results with TensorBoard, run: tensorboard --logdir <results_dir>
During our training, we found issues with both tf and torch backends that leads to errors when using default lstm wrapper provided by rllib. Our installation script above provides fix patches ray_patch.sh for the same. But if you use the manual installation approach, the following fixes need to be applied after installation:
- For tf users:
In your Python library folder, in the file ray/rllib/policy/sample_batch.py, replace line 636 with the following snippet:
time_lengths = tree.map_structure(lambda x: len(x), data[next(iter(data))])
flattened_lengths = tree.flatten(time_lengths)
assert all(t == flattened_lengths[0] for t in flattened_lengths)
data_len = flattened_lengths[0]- For torch users:
In your Python library folder, in the file ray/rllib/models/torch/complex_input_net.py replace line 181 with:
self.num_outputs = concat_size if not self.post_fc_stack else self.post_fc_stack.num_outputs
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent