1mwtt probot to learn the basics of GitHub
1mwtt probot to learn the basics of GitHub
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
On the next page, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
1 - Add a comment to the issue with the title "How to start collaborating? Start here!".
2 - You will get an invitation via e-mail to become a collaborator. Please accept it in order to continue with the remaining steps.
3 - Now that you're a collaborator, fork the repo. You do that by clicking the Fork button in the upper right corner.
4 - A issue with the title "Welcome (Your name)" will be created and assigned to you. You can either follow the link in your e-mail confirmation or look for the issue by going to the original repo (not your fork, but the repo where you started off) and clicking the Issues tab. There you can filter by Assignee -> Your name.
5 - In this issue you will find instructions with the tasks you need to complete. Have fun!
This bot was created by Virginia Balseiro (GitHub, LinkedIn) at the request and specifications of Ilona Budapesti (GitHub, LinkedIn) as part of Volunteer Cohort No. 2 of 1 Million Women To Tech (GitHub, Learn to Code, Mentor) a Silicon Valley based global educational 501(c)3 recognized nonprofit with the mission to offer free coding education to 1 million women and enbies by 2020.
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
Complete each task and watch this issue's comment for rewards! 🏆
Please keep this issue open as a guide, and also to get your rewards in the comments!
Add your name to the README.md file 📝
Open the README.md file and click the pencil button to edit the file.
Make your changes.
Scroll down and click Commit Changes (leave "Commit directly to the master branch" selected)
Go to pull requests and click "new pull request". Right under the title "Compare changes", click the link that says "compare across forks"
Make sure that you're comparing base fork: original repo / master and head fork: your repo / master, and click "Create pull request". If you get "there isn't anything to compare", click "try switching the base" and then create pull request. On the next page, click give your PR a title and optional comment and "create pull request" again. If everything went well, you'll make a mythological animal very happy ❤️
Note: if you don't get your reward, try this: go to your open pull request, click "Merge pull request" and again "Confirm merge". You can do this merge yourself because you're a collaborator, and collaborators have push rights. If you weren't a collaborator, you would still be able to make a pull request, but the you'd have to wait for the owner of the repo to merge your changes. If everything went right, you'll get a cookie down below 😄 This tip applies to the next step as well!
Add a new .md file 📁
Go to the "Code" section of your forked repo and click "Create new file".
Use "your-name.md" as the file name and fill it with a short introduction (you can include where you're from, your likes and dislikes, etc.)
Scroll down and click "Commit new file", just as you did in the previous task.
Commit your change and come back to this issue. You will have received a delicious reward, and your Pull Request will now have 2 commits.
Close this issue 🙋
Scroll down to the bottom of this issue and click "Close issue", then refresh your browser. You'll get another reward! ⭐
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
Django
The Web framework for perfectionists with deadlines.
Laravel
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft
Open source projects and samples from Microsoft.
Google
Google ❤️ Open Source for everyone.
Alibaba
Alibaba Open Source for everyone
D3
Data-Driven Documents codes.
Tencent
China tencent open source team.
