- Introduction
- Reporting bugs and getting help
- Contributing to BIND
- BIND 9.14 features
- Building BIND
- macOS
- Dependencies
- Compile-time options
- Automated testing
- Documentation
- Change log
- Acknowledgments
BIND (Berkeley Internet Name Domain) is a complete, highly portable implementation of the DNS (Domain Name System) protocol.
The BIND name server, named
, is able to serve as an authoritative name
server, recursive resolver, DNS forwarder, or all three simultaneously. It
implements views for split-horizon DNS, automatic DNSSEC zone signing and
key management, catalog zones to facilitate provisioning of zone data
throughout a name server constellation, response policy zones (RPZ) to
protect clients from malicious data, response rate limiting (RRL) and
recursive query limits to reduce distributed denial of service attacks,
and many other advanced DNS features. BIND also includes a suite of
administrative tools, including the dig
and delv
DNS lookup tools,
nsupdate
for dynamic DNS zone updates, rndc
for remote name server
administration, and more.
BIND 9 began as a complete re-write of the BIND architecture that was used in versions 4 and 8. Internet Systems Consortium (https://www.isc.org), a 501(c)(3) public benefit corporation dedicated to providing software and services in support of the Internet infrastructure, developed BIND 9 and is responsible for its ongoing maintenance and improvement. BIND is open source software licensed under the terms of the Mozilla Public License, version 2.0.
For a summary of features introduced in past major releases of BIND, see the file HISTORY.
For a detailed list of changes made throughout the history of BIND 9, see the file CHANGES. See below for details on the CHANGES file format.
For up-to-date release notes and errata, see http://www.isc.org/software/bind9/releasenotes
For information about supported platforms, see PLATFORMS.
To report non-security-sensitive bugs or request new features, you may open an Issue in the BIND 9 project on the ISC GitLab server at https://gitlab.isc.org/isc-projects/bind9.
Please note that, unless you explicitly mark the newly created Issue as
"confidential", it will be publicly readable. Please do not include any
information in bug reports that you consider to be confidential unless
the issue has been marked as such. In particular, if submitting the
contents of your configuration file in a non-confidential Issue, it is
advisable to obscure key secrets: this can be done automatically by
using named-checkconf -px
.
If the bug you are reporting is a potential security issue, such as an
assertion failure or other crash in named
, please do NOT use GitLab to
report it. Instead, please send mail to
[email protected].
Professional support and training for BIND are available from ISC at https://www.isc.org/support.
To join the BIND Users mailing list, or view the archives, visit https://lists.isc.org/mailman/listinfo/bind-users.
If you're planning on making changes to the BIND 9 source code, you may also want to join the BIND Workers mailing list, at https://lists.isc.org/mailman/listinfo/bind-workers.
ISC maintains a public git repository for BIND; details can be found at http://www.isc.org/git/.
Information for BIND contributors can be found in the following files:
- General information: CONTRIBUTING.md
- BIND 9 code style: doc/dev/style.md
- BIND architecture and developer guide: doc/dev/dev.md
Patches for BIND may be submitted as Merge Requests in the ISC GitLab server at at https://gitlab.isc.org/isc-projects/bind9/merge_requests.
By default, external contributors don't have ability to fork BIND in the GitLab server, but if you wish to contribute code to BIND, you may request permission to do so. Thereafter, you can create git branches and directly submit requests that they be reviewed and merged.
If you prefer, you may also submit code by opening a
GitLab Issue and
including your patch as an attachment, preferably generated by
git format-patch
.
BIND 9.14.0 is the first release from a new stable branch of BIND 9, incorporating all changes from the 9.13 development branch, updating the most recent stable branch, 9.12. These changes include:
- A new "plugin" mechanism has been added to allow query functionality to be extended using dynamically loadable libraries. The "filter-aaaa" feature has been removed from named and is now implemented as a plugin.
- QNAME minimization, as described in RFC 7816, is now supported.
- Socket and task code has been refactored to improve performance on most modern machines.
- "Root key sentinel" support, enabling validating resolvers to indicate via a special query which trust anchors are configured for the root zone.
- Secondary zones can now be configured as "mirror" zones; their contents are transferred in as with traditional slave zones, but are subject to DNSSEC validation and are not treated as authoritative data when answering. This makes it easier to configure a local copy of the root zone as described in RFC 7706.
- The "validate-except" option allows configuration of domains below which DNSSEC validation should not be performed.
- The default value of "dnssec-validation" is now "auto".
- IDNA2008 is now supported when linking with
libidn2
. - "named -V" now outputs the default paths for files used by named and other tools.
In addition, workarounds that were formerly in place to enable resolution of domains whose authoritative servers did not respond to EDNS queries have been removed. See https://dnsflagday.net for more details.
Cryptographic support has been modernized. BIND now uses the best available pseudo-random number generator for the platform on which it's built. Very old versions of OpenSSL are no longer supported. Cryptography is now mandatory: building BIND without DNSSEC is no longer supported.
Special code to support certain legacy operating systems has also been removed; see the file PLATFORMS.md for details of supported platforms. In addition to OpenSSL, BIND now requires support for IPv6, threads, and standard atomic operations provided by the C compiler. Non-threaded builds are no longer supported.
BIND 9.14.1 is a maintenance release, and addresses security vulnerabilities disclosed in CVE-2018-5743 and CVE-2019-6467.
BIND 9.14.2 is a maintenance release.
BIND 9.14.3 is a maintenance release, and addresses the security vulnerability disclosed in CVE-2019-6471.
BIND 9.14.4 is a maintenance release, and also adds support for
the new MaxMind GeoIP2 geolocation API when built with
configure --with-geoip2
.
Minimally, BIND requires a UNIX or Linux system with an ANSI C compiler, basic POSIX support, and a 64-bit integer type. Successful builds have been observed on many versions of Linux and UNIX, including RedHat, Fedora, Debian, Ubuntu, SuSE, Slackware, FreeBSD, NetBSD, OpenBSD, Mac OS X, Solaris, HP-UX, and OpenWRT.
BIND requires a cryptography provider library such as OpenSSL or a
hardware service module supporting PKCS#11. On Linux, BIND requires
the libcap
library to set process privileges, though this requirement
can be overridden by disabling capability support at compile time.
See Compile-time options below for details on other libraries
that may be required to support optional features.
BIND is also available for Windows 2008 and higher. See
win32utils/readme1st.txt
for details on building for Windows
systems.
To build on a UNIX or Linux system, use:
$ ./configure
$ make
If you're planning on making changes to the BIND 9 source, you should run
make depend
. If you're using Emacs, you might find make tags
helpful.
Several environment variables that can be set before running configure
will
affect compilation:
Variable | Description |
---|---|
CC |
The C compiler to use. configure tries to figure out the right one for supported systems. |
CFLAGS |
C compiler flags. Defaults to include -g and/or -O2 as supported by the compiler. Please include '-g' if you need to set CFLAGS . |
STD_CINCLUDES |
System header file directories. Can be used to specify where add-on thread or IPv6 support is, for example. Defaults to empty string. |
STD_CDEFINES |
Any additional preprocessor symbols you want defined. Defaults to empty string. For a list of possible settings, see the file OPTIONS. |
LDFLAGS |
Linker flags. Defaults to empty string. |
BUILD_CC |
Needed when cross-compiling: the native C compiler to use when building for the target system. |
BUILD_CFLAGS |
Optional, used for cross-compiling |
BUILD_CPPFLAGS |
|
BUILD_LDFLAGS |
|
BUILD_LIBS |
Building on macOS assumes that the "Command Tools for Xcode" is installed. This can be downloaded from https://developer.apple.com/download/more/ or if you have Xcode already installed you can run "xcode-select --install". This will add /usr/include to the system and install the compiler and other tools so that they can be easily found.
Portions of BIND that are written in Python, including
dnssec-keymgr
, dnssec-coverage
, dnssec-checkds
, and some of the
system tests, require the 'argparse' and 'ply' modules to be available.
'argparse' is a standard module as of Python 2.7 and Python 3.2.
'ply' is available from https://pypi.python.org/pypi/ply.
To see a full list of configuration options, run configure --help
.
To build shared libraries, specify --with-libtool
on the configure
command line.
For the server to support DNSSEC, you need to build it with crypto support.
To use OpenSSL, you should have OpenSSL 1.0.2e or newer installed. If the
OpenSSL library is installed in a nonstandard location, specify the prefix
using --with-openssl=<PREFIX>
on the configure command line. To use a
PKCS#11 hardware service module for cryptographic operations, specify the
path to the PKCS#11 provider library using --with-pkcs11=<PREFIX>
, and
configure BIND with --enable-native-pkcs11
.
To support the HTTP statistics channel, the server must be linked with at
least one of the following: libxml2
http://xmlsoft.org or json-c
https://github.com/json-c. If these are
installed at a nonstandard location, specify the prefix using
--with-libxml2=/prefix
or --with-libjson=/prefix
.
To support compression on the HTTP statistics channel, the server must be
linked against libzlib. If this is installed in a nonstandard location,
specify the prefix using --with-zlib=/prefix
.
To support storing configuration data for runtime-added zones in an LMDB
database, the server must be linked with liblmdb. If this is installed in a
nonstandard location, specify the prefix using with-lmdb=/prefix
.
To support GeoIP location-based ACLs, the server must be linked with
libGeoIP. This is not turned on by default; BIND must be configured with
--with-geoip
. If the library is installed in a nonstandard location,
specify the prefix using --with-geoip=/prefix
.
For DNSTAP packet logging, you must have installed libfstrm
https://github.com/farsightsec/fstrm
and libprotobuf-c
https://developers.google.com/protocol-buffers,
and BIND must be configured with --enable-dnstap
.
Certain compiled-in constants and default settings can be increased to
values better suited to large servers with abundant memory resources (e.g,
64-bit servers with 12G or more of memory) by specifying
--with-tuning=large
on the configure
command line. This can improve
performance on big servers, but will consume more memory and may degrade
performance on smaller systems.
On Linux, process capabilities are managed in user space using
the libcap
library, which can be installed on most Linux systems via
the libcap-dev
or libcap-devel
module. Process capability support can
also be disabled by configuring with --disable-linux-caps
.
On some platforms it is necessary to explicitly request large file support
to handle files bigger than 2GB. This can be done by using
--enable-largefile
on the configure
command line.
Support for the "fixed" rrset-order option can be enabled or disabled by
specifying --enable-fixed-rrset
or --disable-fixed-rrset
on the
configure command line. By default, fixed rrset-order is disabled to
reduce memory footprint.
The --enable-querytrace
option causes named
to log every step of
processing every query. This should only be enabled when debugging, because
it has a significant negative impact on query performance.
make install
will install named
and the various BIND 9 libraries. By
default, installation is into /usr/local, but this can be changed with the
--prefix
option when running configure
.
You may specify the option --sysconfdir
to set the directory where
configuration files like named.conf
go by default, and --localstatedir
to set the default parent directory of run/named.pid
. For backwards
compatibility with BIND 8, --sysconfdir
defaults to /etc
and
--localstatedir
defaults to /var
if no --prefix
option is given. If
there is a --prefix
option, sysconfdir defaults to $prefix/etc
and
localstatedir defaults to $prefix/var
.
A system test suite can be run with make test
. The system tests require
you to configure a set of virtual IP addresses on your system (this allows
multiple servers to run locally and communicate with one another). These
IP addresses can be configured by running the command
bin/tests/system/ifconfig.sh up
as root.
Some tests require Perl and the Net::DNS and/or IO::Socket::INET6 modules, and will be skipped if these are not available. Some tests require Python and the 'dnspython' module and will be skipped if these are not available. See bin/tests/system/README for further details.
Unit tests are implemented using the CMocka unit testing framework.
To build them, use configure --with-cmocka
. Execution of tests is done
by the Kyua test execution engine; if the kyua
command is available,
then unit tests can be run via make test
or make unit
.
The BIND 9 Administrator Reference Manual is included with the source
distribution, in DocBook XML, HTML and PDF format, in the doc/arm
directory.
Some of the programs in the BIND 9 distribution have man pages in their
directories. In particular, the command line options of named
are
documented in bin/named/named.8
.
Frequently (and not-so-frequently) asked questions and their answers can be found in the ISC Knowledge Base at https://kb.isc.org.
Additional information on various subjects can be found in other
README
files throughout the source tree.
A detailed list of all changes that have been made throughout the development BIND 9 is included in the file CHANGES, with the most recent changes listed first. Change notes include tags indicating the category of the change that was made; these categories are:
Category | Description |
---|---|
[func] | New feature |
[bug] | General bug fix |
[security] | Fix for a significant security flaw |
[experimental] | Used for new features when the syntax or other aspects of the design are still in flux and may change |
[port] | Portability enhancement |
[maint] | Updates to built-in data such as root server addresses and keys |
[tuning] | Changes to built-in configuration defaults and constants to improve performance |
[performance] | Other changes to improve server performance |
[protocol] | Updates to the DNS protocol such as new RR types |
[test] | Changes to the automatic tests, not affecting server functionality |
[cleanup] | Minor corrections and refactoring |
[doc] | Documentation |
[contrib] | Changes to the contributed tools and libraries in the 'contrib' subdirectory |
[placeholder] | Used in the master development branch to reserve change numbers for use in other branches, e.g. when fixing a bug that only exists in older releases |
In general, [func] and [experimental] tags will only appear in new-feature releases (i.e., those with version numbers ending in zero). Some new functionality may be backported to older releases on a case-by-case basis. All other change types may be applied to all currently-supported releases.
Most notes in the CHANGES file include a reference to a bug report or
issue number. Prior to 2018, these were usually of the form [RT #NNN]
and referred to entries in the "bind9-bugs" RT database, which was not open
to the public. More recent entries use the form [GL #NNN]
or, less often,
[GL !NNN]
, which, respectively, refer to issues or merge requests in the
Gitlab database. Most of these are publicly readable, unless they include
information which is confidential or security senstive.
To look up a Gitlab issue by its number, use the URL https://gitlab.isc.org/isc-projects/bind9/issues/NNN. To look up a merge request, use https://gitlab.isc.org/isc-projects/bind9/merge_requests/NNN.
In rare cases, an issue or merge request number may be followed with the letter "P". This indicates that the information is in the private ISC Gitlab instance, which is not visible to the public.
-
The original development of BIND 9 was underwritten by the following organizations:
Sun Microsystems, Inc. Hewlett Packard Compaq Computer Corporation IBM Process Software Corporation Silicon Graphics, Inc. Network Associates, Inc. U.S. Defense Information Systems Agency USENIX Association Stichting NLnet - NLnet Foundation Nominum, Inc.
-
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. http://www.OpenSSL.org/
-
This product includes cryptographic software written by Eric Young ([email protected])
-
This product includes software written by Tim Hudson ([email protected])