A kernel module for Realtek RTL8152/RTL8153 Based USB Ethernet Adapters - Meant to be used in distributions only - For upstream bugs, please report them to your distribution maintainer or to Realtek.
- If you want to support S5 WOL, you have to find
EXTRA_CFLAGS += -DRTL8152_S5_WOL
in the Makefile. Then, remove the first character '#", if it exists.
- For Fedora, you may have to run the following command after installing the
driver.
# dracut -f
- For Ubuntu, you may have to run the following command after installing the
driver.
# sudo depmod -a
# sudo update-initramfs -u
- Example of setting speed
2.5G before kernel v4.10
# ethtool -s eth0 autoneg on advertise 0x802f
2.5G for kernel v4.10 and later
# ethtool -s eth0 autoneg on advertise 0x80000000002f
# ethtool -s eth0 autoneg on advertise 0x002f (1G)
# ethtool -s eth0 autoneg on advertise 0x000f (100M full)
# ethtool -s eth0 autoneg on advertise 0x0003 (10M full)
- Disable center tap short
# make CONFIG_CTAP_SHORT=OFF modules
- Ring parameter
Show Ring parameter
# ethtool -g eth0
Changes the number of ring entries for the Rx ring.
# ethtool -G eth0 rx 100