a-a-abdelhamid / smuonsright_scan Goto Github PK

MadGraph5_aMC@NLO (MadEvent)
arXiv:1405.0301


http://madgraph.phys.ucl.ac.be/
http://madgraph.hep.uiuc.edu/

Information on the process to be generated is found in the file
index.html in this directory, which should be viewed using your web
browser. If the file index.html is missing, you need to generate a
process. Please refer to the README file one directory above this
(MadGraph5_vx_x_x/) for instructions on how to generate a process.

This README includes information on how 
A) generate events
B) how to run in cluster/multi-core mode
C) how to launch sequential run (called multi-run)
D) How to launch Pythia/PGS/Delphes
E) How to prevent automatic opening of html pages
F) How to link to lhapdf 
G) How to run in gridpack mode

A) To generate events:
-------------------

1) Specify the model parameters. The model parameters include masses
and widths for the particles and coupling constants. They are given by
the file param_card.dat in the Cards directory. Although it is
possible to edit this file manually, this is not recommended since
there are dependencies among the parameters which need to be taken
into account. Instead the param_card.dat should be generated using one
of the Calculators found on the MG/ME homepages (stated above).  Click
Calculators, choose model and follow the instructions. Place the
resulting param_card.dat in the Cards directory.

2) Specify the run parameters. The run parameters includes collider
type and energy, choice of parton distribution functions and scales.
They are given by the file run_card.dat in the Cards directory. This
file should be edited manually, following the syntax given in the
example file.
**Warning!** For several reasons, avoid running more than 100,000
events per run. Instead perform several runs to reach the luminosity
you need, e.g. using the multi_run describe below. Subsequent runs
automatically update the random seed, so the results from different
runs are statistically independent.

3) Run bin/generate_events to generate the events and calculate the
cross-section.

4) Follow the generation and look at the results in the file
HTML/crossx.html, using your web browser.

5) If you want to run Pythia and/or PGS/Delphes on the events.
You first need to install it. For this launch MG5 ($MG5PATH/bin/mg5)
and type `install pythia-pgs`/ `install Delphes`.
If they are detected, the first question asked when launching ./bin/generate_events
should be something like:
Which programs do you want to run?
  0 / auto    : running existing card
  1 / parton  :  Madevent
  2 / pythia  : MadEvent + Pythia.
  3 / pgs     : MadEvent + Pythia + PGS.
 [0, 1, 2, 3, auto, parton, pythia, pgs][20s to answer] 
if this is not that means that you need to specify the path of the new program
in the file Cards/me5_configuration.txt . By default they are 
installed in the MG5 directory.

If you need to run one of those programs on some events which are already generated
please see instructions below.


B) Running in cluster or multicore mode:
----------------------------------------

In order to automatically run in cluster or multicore mode, please set
the flag run_mode in the Cards/me5_configuration.txt file (or in the
input/mg5_configuration.txt file before you generate your process):

# Default Running mode 
# 0: single machine/ 1: cluster / 2: multicore
run_mode = 0

You can also specify the cluster type (for cluster mode) or your
preferred number of CPUs (for multicore mode - note that by default,
the maximum number of cores is used) by setting cluster_type and
nb_core.


C) Launch sequential runs for generation of large number of events:
-------------------------------------------------------------------

For various reason, we recommend not to generate more than 100k events
per run. In order to simplify generating large numbers of events,
we have created a special command 'multi_run', which is equivalent to
running generate_events multiple times (ensuring that the random seed is
different for each run), and also automatically combines the resulting
lhe files into a single file.
This command can be launched via the madevent user interface
./bin/madevent using the following command:
multi_run NBRUN [RUN_NAME] [options]
For more information about this command (valid options), you can type
`help multi_run` inside the interface.

Note that you can also launch a command whithout entering the interactive mode:
./bin/madevent multi_run NBRUN 


D) Launching pythia/pgs/delphes on a (previously) generated sample:
-------------------------------------------------------------------

In this section, I will presupose that the corresponding package is
already installed and configured properly. (See section how to generate 
events if this is not the case)

In order to launch pythia/pgs/delphes on a sample, you need first to
launch the interactive session of madevent `./bin/madevent`
and then you can enter of the following command
pythia RUN [--run_options]
pgs RUN [--run_options]
delphes RUN [--run_options]
where RUN is the run_name of the run. One of the convenient options is
--tag=XXXX
which allow to specify the tag name in case of multiple runs with
the same program. Note that by default, a unique run tag is generated 
for each time you run.

E) How to prevent automatic opening of the crossx.html page:
------------------------------------------------------------

Edit the file ./Cards/me5_configuration.txt and set
the option automatic_html_opening to `False`.
You can also edit the MG5 configuration card
input/mg5_configuration.txt
in order to have this value on False by default for all subsequently 
generated processes.


F) How to run with a LHAPDF set
-------------------------------

1) Install lhapdf on your computer
2) If not install globally, modify the file input/mg5_configuration.txt
and specify the path to the script lhpadfconfig.
3) in the run_card use the following parameter
 'lhapdf'    = pdlabel     ! PDF set
 10042       = lhaid       ! PDF number used ONLY for LHAPDF
4) RUN as usual


G) How to run in gridpack mode
------------------------------

The gridpackage is meant to be sent over to the cluster or grid
nodes. It's completely frozen, meaning that you cannot change any
parameters or run options, apart from the # of event and the rnd
number.

Using the option " .true.  = gridpack " in the run_card.dat will generate a gridpack.tar.gz.

When you unpack it you get:
run.sh
madevent/
The first is a script which accepts two numbers (the number of events
and the rnd number).

For more information on the options please refer to 
https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/GridDevelopment

to know the technical details please read:
https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/IntroGrid