adafruit / adafruit-metro-esp32-s2-pcb

PCB files for Adafruit Metro ESP32-S2.

Adafruit Metro ESP32-S2 PCB

Click here to purchase one from the Adafruit shop

PCB files for the Adafruit Metro ESP32-S2.

Format is EagleCAD schematic and board layout

• https://www.adafruit.com/product/4775

Description

What's Metro shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices, and a Lipoly charger circuit? What's finishing up testing and nearly ready for fabrication? That's right - its the new Adafruit Metro ESP32-S2! With native USB and a load of PSRAM this board is perfect for use with CircuitPython or Arduino, to add low-cost WiFi while keeping shield-compatibility

Features:

• ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
• WROVER module has FCC/CE certification and comes with 4 MByte of Flash and 8 MByte of PSRAM - you can have huge data buffers
• Lotsa power options - 6-12VDC barrel jack or USB type C or Lipoly battery
• Built-in battery charging when powered over DC or USB
• UNO-shape so shields can plug in
• Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
• Serial debug pins (optional, for checking the hardware serial debug console)
• JTAG pads for advanced debugging access.
• On/Off switch
• STEMMA QT connector for I2C devices
• On/Charge/User LEDs + status NeoPixel
• Works with Arduino or CircuitPython
• 53.2mm x 72mm / 2" x 2.8"
• Height (w/ barrel jack): 14.8mm / 0.6"
• Weight: 22.5g

License

Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Designed by Limor Fried/Ladyada for Adafruit Industries.

Creative Commons Attribution/Share-Alike, all text above must be included in any redistribution. See license.txt for additional details.