adammwest / cgminer Goto Github PK
View Code? Open in Web Editor NEWThis project forked from kanoi/cgminer
ASIC/FPGA miner in c for bitcoin
Home Page: https://kano.is/
License: Other
This project forked from kanoi/cgminer
ASIC/FPGA miner in c for bitcoin
Home Page: https://kano.is/
License: Other
This is a multi-threaded multi-pool FPGA and ASIC miner for bitcoin. This code is provided entirely free of charge by it's programmers. If you wish to support it, simply mine at https://kano.is/ This code is licensed under the GPLv3. This means that the source to any modifications you make to this code MUST be provided by law if you distribute modified binaries. See COPYING for details. Search below for the following headings for details about mining EXECUTIVE SUMMARY ON USAGE BUILDING CGMINER FOR YOURSELF If building from git If building on Ubuntu Basic *nix build instructions Building on Windows10 Building on MacOS Usage instructions SETTING UP USB DEVICES on WINDOWS/LINUX/OSX WINDOWS LINUX OSX Advanced USB options SCREEN DISPLAY WHILE RUNNING MULTIPLE POOL CONNECTIONS QUOTAS LOGGING FAQ GIT TREE: https://github.com/kanoi/cgminer SEE ALSO API-README, ASIC-README and FGPA-README FOR MORE INFORMATION ON EACH. --- EXECUTIVE SUMMARY ON USAGE: Single pool: cgminer -o stratum+tcp://pool:port -u username -p password Multiple pools: cgminer -o stratum+tcp://pool1:port -u pool1username -p pool1password -o stratum+tcp://pool2:port -u pool2usernmae -p pool2password Single pool with a standard http proxy: cgminer -o "http:proxy:port|stratum+tcp://pool:port" -u username -p password Single pool with a socks5 proxy: cgminer -o "socks5:proxy:port|stratum+tcp://pool:port" -u username -p password Single pool with stratum protocol support: cgminer -o stratum+tcp://pool:port -u username -p password The list of proxy types are: http: standard http 1.1 proxy http0: http 1.0 proxy socks4: socks4 proxy socks5: socks5 proxy socks4a: socks4a proxy socks5h: socks5 proxy using a hostname If you compile cgminer with a version of CURL before 7.19.4 then some of the above will not be available. All are available since CURL version 7.19.4 If you specify the --socks-proxy option to cgminer, it will only be applied to all pools that don't specify their own proxy setting like above After saving configuration from the menu, you do not need to give cgminer any arguments and it will load your configuration. Any configuration file may also contain a single "include" : "filename" to recursively include another configuration file. Writing the configuration will save all settings from all files in the output. --- BUILDING CGMINER FOR YOURSELF DEPENDENCIES: Mandatory: pkg-config http://www.freedesktop.org/wiki/Software/pkg-config libtool http://www.gnu.org/software/libtool/ Optional: curl dev library http://curl.haxx.se/libcurl/ (libcurl4-openssl-dev - Must tell configure --disable-libcurl otherwise it will attempt to compile it in) curses dev library (libncurses5-dev or libpdcurses on WIN32 for text user interface) libusb-1 dev library (libusb-1.0-0-dev) (This is only required for USB device support) libudev dev library (libudev-dev) (This is only required for USB device support and is linux only) uthash dev (uthash-dev) Will use a copy included with the source if unavailable. libjansson dev (libjansson-dev) Will use a copy included with the source if unavailable. If building from git: git (of course) autoconf automake If building on Ubuntu: sudo apt-get install build-essential autoconf automake libtool \ pkg-config libcurl4-openssl-dev libudev-dev \ libusb-1.0-0-dev libncurses5-dev zlib1g-dev git CGMiner specific configuration options: --enable-ants1 Compile support for Antminer S1 Bitmain (default disabled) --enable-ants2 Compile support for Antminer S2 Bitmain (default disabled) --enable-avalon Compile support for Avalon (default disabled) --enable-avalon2 Compile support for Avalon2/3 (default disabled) --enable-avalon4 Compile support for Avalon4/4.1/6 (default disabled) --enable-avalon7 Compile support for Avalon7 (default disabled) --enable-avalon8 Compile support for Avalon8 (default disabled) --enable-bab Compile support for BlackArrow Bitfury (default disabled) --enable-bflsc Compile support for BFL ASICs (default disabled) --enable-bitforce Compile support for BitForce FPGAs (default disabled) --enable-bitfury Compile support for BitFury ASICs (default disabled) --enable-bitmine_A1 Compile support for Bitmine.ch A1 ASICs (default disabled) --enable-blockerupter Compile support for ASICMINER BlockErupter Tube/Prisma (default disabled) --enable-cointerra Compile support for Cointerra ASICs (default disabled) --enable-drillbit Compile support for Drillbit BitFury ASICs (default disabled) --enable-gekko Compile support for GekkoScience (default disabled) --enable-hashfast Compile support for Hashfast (default disabled) --enable-icarus Compile support for Icarus (default disabled) --enable-klondike Compile support for Klondike (default disabled) --enable-knc Compile support for KnC miners (default disabled) --enable-minion Compile support for Minion BlackArrow ASIC (default disabled) --enable-modminer Compile support for ModMiner FPGAs(default disabled) --enable-sp10 Compile support for Spondoolies SP10 (default disabled) --enable-sp30 Compile support for Spondoolies SP30 (default disabled) --disable-libcurl Disable building with libcurl for GBT support --enable-libsystemd Compile support for system watchdog and status notifications (default disabled) --without-curses Compile support for curses TUI (default enabled) --with-system-jansson Compile against dynamic system jansson (default use included static jansson) Basic *nix build instructions: To actually build: ./autogen.sh # only needed if building from git repo CFLAGS="-O2 -Wall -march=native -fcommon" ./configure <options> make No installation is necessary. You may run cgminer from the build directory directly, but you may do make install if you wish to install cgminer to a system location or location you specified. Building on Windows10: see windows-build.txt Building on MacOS see mac-build.txt --- Usage instructions: Run "cgminer --help" to see options: Usage: cgminer [-DdElmpPQqUsTouOchnV] Options for both config file and command line: --anu-freq <arg> Set AntminerU1/2 frequency in MHz, range 125-500 (default: 250.0) --api-allow <arg> Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets] --api-description <arg> Description placed in the API status header, default: cgminer version --api-groups <arg> API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use --api-listen Enable API, default: disabled --api-mcast Enable API Multicast listener, default: disabled --api-mcast-addr <arg> API Multicast listen address --api-mcast-code <arg> Code expected in the API Multicast message, don't use '-' --api-mcast-des <arg> Description appended to the API Multicast reply, default: '' --api-mcast-port <arg> API Multicast listen port (default: 4028) --api-network Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1 --api-port <arg> Port number of miner API (default: 4028) --au3-freq <arg> Set AntminerU3 frequency in MHz, range 100-250 (default: 225.0) --au3-volt <arg> Set AntminerU3 voltage in mv, range 725-850, 0 to not set (default: 775) --avalon-auto Adjust avalon overclock frequency dynamically for best hashrate --avalon-cutoff <arg> Set avalon overheat cut off temperature (default: 60) --avalon-fan <arg> Set fanspeed percentage for avalon, single value or range (default: 20-100) --avalon-freq <arg> Set frequency range for avalon-auto, single value or range --avalon-options <arg> Set avalon options baud:miners:asic:timeout:freq:tech --avalon-temp <arg> Set avalon target temperature (default: 50) --avalon2-freq Set frequency range for Avalon2, single value or range --avalon2-voltage Set Avalon2 core voltage, in millivolts --avalon2-fan Set Avalon2 target fan speed --avalon2-cutoff <arg> Set Avalon2 overheat cut off temperature (default: 88) --avalon2-fixed-speed Set Avalon2 fan to fixed speed --avalon4-automatic-voltage Automatic adjust voltage base on module DH --avalon4-voltage Set Avalon4 core voltage, in millivolts, step: 125 --avalon4-freq Set frequency for Avalon4, 1 to 3 values, example: 445:385:370 --avalon4-fan Set Avalon4 target fan speed range --avalon4-temp <arg> Set Avalon4 target temperature (default: 42) --avalon4-cutoff <arg> Set Avalon4 overheat cut off temperature (default: 65) --avalon4-polling-delay <arg> Set Avalon4 polling delay value (ms) (default: 20) --avalon4-ntime-offset <arg> Set Avalon4 MM ntime rolling max offset (default: 4) --avalon4-aucspeed <arg> Set Avalon4 AUC IIC bus speed (default: 400000) --avalon4-aucxdelay <arg> Set Avalon4 AUC IIC xfer read delay, 4800 ~= 1ms (default: 9600) --avalon4-miningmode <arg> Set Avalon4 mining mode(0:custom, 1:eco, 2:normal, 3:turbo (default: 0) --avalon4-freezesafe Make Avalon4 running as a radiator when stratum server failed --avalon4-ntcb <arg> Set Avalon4 MM NTC B value (default: 3450) --avalon4-freq-min <arg> Set minimum frequency for Avalon4 (default: 100) --avalon4-freq-max <arg> Set maximum frequency for Avalon4 (default: 1000) --avalon4-noncecheck-off Disable A3218 inside nonce check function --avalon4-smart-speed <arg> Set smart speed, range 0-3. 0 means Disable (default: 2) --avalon4-speed-bingo <arg> Set A3218 speed bingo for smart speed mode 1 (default: 255) --avalon4-speed-error <arg> Set A3218 speed error for smart speed mode 1 (default: 3) --avalon4-least-pll <arg> Set least pll check threshold for smart speed mode 2 (default: 768) --avalon4-most-pll <arg> Set most pll check threshold for smart speed mode 2 (default: 256) --avalon7-voltage Set Avalon7 default core voltage, in millivolts, step: 78 --avalon7-voltage-level Set Avalon7 default level of core voltage, range:[0, 15], step: 1 --avalon7-voltage-offset Set Avalon7 default offset of core voltage, range:[-2, 1], step: 1 --avalon7-freq Set Avalon7 default frequency, range:[24, 1404], step: 12, example: 500 --avalon7-freq-sel <arg> Set Avalon7 default frequency select, range:[0, 5], step: 1, example: 3 (default: 0) --avalon7-fan Set Avalon7 target fan speed, range:[0, 100], step: 1, example: 0-100 --avalon7-temp <arg> Set Avalon7 target temperature, range:[0, 100] (default: 99) --avalon7-polling-delay <arg> Set Avalon7 polling delay value (ms) (default: 20) --avalon7-aucspeed <arg> Set AUC3 IIC bus speed (default: 400000) --avalon7-aucxdelay <arg> Set AUC3 IIC xfer read delay, 4800 ~= 1ms (default: 19200) --avalon7-smart-speed <arg> Set Avalon7 smart speed, range 0-1. 0 means Disable (default: 1) --avalon7-th-pass <arg> Set A3212 th pass value (default: 162) --avalon7-th-fail <arg> Set A3212 th fail value (default: 10921) --avalon7-th-init <arg> Set A3212 th init value (default: 32767) --avalon7-th-ms <arg> Set A3212 th ms value (default: 1) --avalon7-th-timeout <arg> Set A3212 th timeout value (default: 0) --avalon7-iic-detect Enable Avalon7 detect through iic controller --avalon7-freqadj-time <arg> Set Avalon7 check interval when run in AVA7_FREQ_TEMPADJ_MODE (default: 60) --avalon7-delta-temp <arg> Set Avalon7 delta temperature when reset freq in AVA7_FREQ_TEMPADJ_MODE (default: 0) --avalon7-delta-freq <arg> Set Avalon7 delta freq when adjust freq in AVA7_FREQ_TEMPADJ_MODE (default: 100) --avalon7-freqadj-temp <arg> Set Avalon7 check temperature when run into AVA7_FREQ_TEMPADJ_MODE (default: 104) --avalon7-nonce-mask <arg> Set A3212 nonce mask, range 24-32. (default: 31) --no-avalon7-asic-debug Disable A3212 debug. --avalon8-voltage-level Set Avalon8 default level of core voltage, range:[0, 15], step: 1 --avalon8-voltage-level-offset Set Avalon8 default offset of core voltage level, range:[-2, 1], step: 1 --avalon8-freq Set Avalon8 default frequency, range:[25, 1200], step: 25, example: 800 --avalon8-freq-sel <arg> Set Avalon8 default frequency select, range:[0, 3], step: 1, example: 3 (default: 3) --avalon8-fan Set Avalon8 target fan speed, range:[0, 100], step: 1, example: 0-100 --avalon8-temp <arg> Set Avalon8 target temperature, range:[0, 100] (default: 90) --avalon8-polling-delay <arg> Set Avalon8 polling delay value (ms) (default: 20) --avalon8-aucspeed <arg> Set AUC3 IIC bus speed (default: 400000) --avalon8-aucxdelay <arg> Set AUC3 IIC xfer read delay, 4800 ~= 1ms (default: 19200) --avalon8-smart-speed <arg> Set Avalon8 smart speed, range 0-1. 0 means Disable (default: 1) --avalon8-th-pass <arg> Set A3210 th pass value (default: -1) --avalon8-th-fail <arg> Set A3210 th fail value (default: -1) --avalon8-th-init <arg> Set A3210 th init value (default: 32767) --avalon8-th-ms <arg> Set A3210 th ms value (default: 5) --avalon8-th-timeout <arg> Set A3210 th timeout value (default: 4294967295) --avalon8-th-add <arg> Set A3210 th add value (default: 1) --avalon8-iic-detect Enable Avalon8 detect through iic controller --avalon8-nonce-mask <arg> Set A3210 nonce mask, range 24-32. (default: -1) --avalon8-nonce-check <arg> Set A3210 nonce check, range 0-1. (default: 1) --avalon8-roll-enable <arg> Set A3210 roll enable, range 0-1. (default: 1) --avalon8-mux-l2h <arg> Set Avalon8 mux l2h, range 0-2. (default: 0) --avalon8-mux-h2l <arg> Set Avalon8 mux h2l, range 0-1. (default: 1) --avalon8-h2ltime0-spd <arg> Set Avalon8 h2ltime0 spd, range 0-255. (default: 3) --avalon8-spdlow <arg> Set Avalon8 spdlow, range 0-3. (default: -1) --avalon8-spdhigh <arg> Set Avalon8 spdhigh, range 0-3. (default: 3) --avalon8-cinfo-asic Set Avalon8 cinfo asic index, range:[0, 25], step: 1 --avalon8-pid-p <arg> Set Avalon8 pid-p, range 0-9999. (default: 2) --avalon8-pid-i <arg> Set Avalon8 pid-i, range 0-9999. (default: 5) --avalon8-pid-d <arg> Set Avalon8 pid-d, range 0-9999. (default: 0) --bab-options <arg> Set BaB options max:def:min:up:down:hz:delay:trf --balance Change multipool strategy from failover to even share balance --benchfile <arg> Run cgminer in benchmark mode using a work file - produces no shares --benchfile-display Display each benchfile nonce found --benchmark Run cgminer in benchmark mode - produces no shares --bet-clk <arg> Set clockspeed of ASICMINER Tube/Prisma to (arg+1)*10MHz (default: 23) --bfl-range Use nonce range on bitforce devices if supported --bflsc-overheat <arg> Set overheat temperature where BFLSC devices throttle, 0 to disable (default: 85) --bitburner-fury-voltage <arg> Set BitBurner Fury core voltage, in millivolts --bitburner-fury-options <arg> Override avalon-options for BitBurner Fury boards baud:miners:asic:timeout:freq --bitburner-voltage <arg> Set BitBurner (Avalon) core voltage, in millivolts --bitmain-auto Adjust bitmain overclock frequency dynamically for best hashrate --bitmain-cutoff <arg> Set bitmain overheat cut off temperature --bitmain-fan <arg> Set fanspeed percentage for bitmain, single value or range (default: 20-100) --bitmain-freq <arg> Set bitmain freq options timeout:freq:regdata --bitmain-hwerror Set bitmain device detect hardware error --bitmain-options <arg> Set bitmain options baud:miners:asic:timeout:freq:regdata --bitmain-temp <arg> Set bitmain target temperature --bitmain-workdelay <arg> Set bitmain work delay (ms) 0-100 --bitmain-voltage <arg> Set bitmain voltage - S2/S3 only --bitmain-dev <arg> Set bitmain device - S2 only --bitmainbeeper Set bitmain beeper ringing --bitmaintempoverctrl Set bitmain stop runing when temprerature is over 80 degree Celsius --block-check Run a block difficulty check of the binary then exit --bxf-bits <arg> Set max BXF/HXF bits for overclocking (default: 54) --bxf-temp-target <arg> Set target temperature for BXF/HXF devices (default: 82) --bxm-bits <arg> Set BXM bits for overclocking (default: 54) --btc-address <arg> Set bitcoin target address when solo mining to bitcoind --btc-sig <arg> Set signature to add to coinbase when solo mining (optional) --compac-freq <arg> Set GekkoScience Compac frequency in MHz, range 100-500 (default: 150.0) --compact Use compact display without per device statistics --debug|-D Enable debug output --decode Decode 2nd pool stratum coinbase transactions (1st must be bitcoind) and exit --disable-rejecting Automatically disable pools that continually reject shares --dragonmint-t1-options <arg> Dragonmint T1 options ref_clk_khz:sys_clk_khz:spi_clk_khz:override_chip_num --T1efficient Tune Dragonmint T1 per chain voltage and frequency for optimal efficiency --T1noauto Disable Dragonmint T1 per chain auto voltage and frequency tuning --T1performance Tune Dragonmint T1 per chain voltage and frequency for maximum performance --T1fantarget <arg> Throttle T1 frequency to keep fan less than target fan speed (default: 100) --T1Pll1 <arg> Set PLL Clock 1 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll2 <arg> Set PLL Clock 2 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll3 <arg> Set PLL Clock 3 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll4 <arg> Set PLL Clock 4 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll5 <arg> Set PLL Clock 5 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll6 <arg> Set PLL Clock 6 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll7 <arg> Set PLL Clock 7 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll8 <arg> Set PLL Clock 8 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Volt1 <arg> Dragonmint T1 set voltage 1 - VID overrides if set (390-425) (default: 404) --T1Volt2 <arg> Dragonmint T1 set voltage 2 - VID overrides if set (390-425) (default: 404) --T1Volt3 <arg> Dragonmint T1 set voltage 3 - VID overrides if set (390-425) (default: 404) --T1Volt4 <arg> Dragonmint T1 set voltage 4 - VID overrides if set (390-425) (default: 404) --T1Volt5 <arg> Dragonmint T1 set voltage 5 - VID overrides if set (390-425) (default: 404) --T1Volt6 <arg> Dragonmint T1 set voltage 6 - VID overrides if set (390-425) (default: 404) --T1Volt7 <arg> Dragonmint T1 set voltage 7 - VID overrides if set (390-425) (default: 404) --T1Volt8 <arg> Dragonmint T1 set voltage 8 - VID overrides if set (390-425) (default: 404) --T1VID1 <arg> Dragonmint T1 set VID 1 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID2 <arg> Dragonmint T1 set VID 2 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID3 <arg> Dragonmint T1 set VID 3 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID4 <arg> Dragonmint T1 set VID 4 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID5 <arg> Dragonmint T1 set VID 5 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID6 <arg> Dragonmint T1 set VID 6 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID7 <arg> Dragonmint T1 set VID 7 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID8 <arg> Dragonmint T1 set VID 8 in noauto - Overrides voltage if set (1-31) (default: 0) --drillbit-options <arg> Set drillbit options <int|ext>:clock[:clock_divider][:voltage] --expiry|-E <arg> Upper bound on how many seconds after getting work we consider a share from it stale (default: 120) --failover-only Don't leak work to backup pools when primary pool is lagging --fix-protocol Do not redirect to stratum protocol from GBT --gekko-2pac-detect Detect GekkoScience 2Pac BM1384 --gekko-2pac-freq <arg> Set GekkoScience 2Pac BM1384 frequency in MHz, range 6.25-500 (default 100.0) --gekko-bauddiv Set GekkoScience BM1387 baud divider {0: auto, 1: 1.5M, 7: 375K, 13: 214K, 25: 115K} --gekko-compac-detect Detect GekkoScience Compac BM1384 --gekko-compac-freq <arg> Set GekkoScience Compac BM1384 frequency in MHz, range 6.25-500 (default 150.0) --gekko-compacf-detect Detect GekkoScience CompacF BM1397 --gekko-compacf-freq <arg> Set GekkoScience CompacF BM1397 frequency in MHz, range 100-800 (default 200.0) --gekko-r909-detect Detect GekkoScience Terminus R909 BM1397 --gekko-r909-freq <arg> Set GekkoScience Terminus R909 BM1397 frequency in MHz, range 100-800 (default 450.0) --gekko-lowboost GekkoScience NewPac/R606 AsicBoost - 2 midstate --gekko-newpac-detect Detect GekkoScience NewPac BM1387 --gekko-newpac-freq Set GekkoScience NewPac BM1387 frequency in MHz, range 50-900 --gekko-noboost Disable GekkoScience NewPac/R606/CompacF/R909 AsicBoost --gekko-r606-detect Detect GekkoScience Terminus BM1387 --gekko-r606-freq Set GekkoScience Terminus R606 frequency in MHz, range 50-900 --gekko-serial Detect GekkoScience Device by Serial Number --gekko-start-freq Ramp start frequency MHz 25-500 --gekko-step-delay Ramp step interval range 1-600 --gekko-terminus-detect Detect GekkoScience Terminus BM1384 --gekko-terminus-freq <arg> Set GekkoScience Terminus BM1384 frequency in MHz, range 6.25-500 (default 150.0) --gekko-tune-down Set GekkoScience miner minimum hash quality, range 0-100 --gekko-tune-up Set GekkoScience miner ramping hash threshold, range 0-99 --gekko-wait-factor Set GekkoScience miner task send wait factor, range 0.01-2.00 --hfa-hash-clock <arg> Set hashfast clock speed (default: 550) --hfa-fail-drop <arg> Set how many MHz to drop clockspeed each failure on an overlocked hashfast device (default: 10) --hfa-fan <arg> Set fanspeed percentage for hashfast, single value or range (default: 10-85) --hfa-name <arg> Set a unique name for a single hashfast device specified with --usb or the first device found --hfa-noshed Disable hashfast dynamic core disabling feature --hfa-options <arg> Set hashfast options name:clock (comma separated) --hfa-temp-overheat <arg> Set the hashfast overheat throttling temperature (default: 95) --hfa-temp-target <arg> Set the hashfast target temperature (0 to disable) (default: 88) --hro-freq Set the hashratio clock frequency (default: 280) --hotplug <arg> Seconds between hotplug checks (0 means never check) --klondike-options <arg> Set klondike options clock:temptarget --load-balance Change multipool strategy from failover to quota based balance --log|-l <arg> Interval in seconds between log output (default: 5) --lowmem Minimise caching of shares for low memory applications --mac-yield Allow yield on old macs (default dont) --minion-chipreport <arg> Seconds to report chip 5min hashrate, range 0-100 (default: 0=disabled) --minion-freq <arg> Set minion chip frequencies in MHz, single value or comma list, range 100-1400 (default: 1200) --minion-freqchange Millisecond total time to do frequency changes (default: 1000) --minion-freqpercent Percentage to use when starting up a chip (default: 70%) --minion-idlecount Report when IdleCount is >0 or changes --minion-ledcount Turn off led when more than this many chips below the ledlimit (default: 0) --minion-ledlimit Turn off led when chips GHs are below this (default: 90) --minion-noautofreq Disable automatic frequency adjustment --minion-overheat Enable directly halting any chip when the status exceeds 100C --minion-spidelay Add a delay in microseconds after each SPI I/O --minion-spireset SPI regular reset: iNNN for I/O count or sNNN for seconds - 0 means none --minion-spisleep Sleep time in milliseconds when doing an SPI reset --minion-temp <arg> Set minion chip temperature threshold, single value or comma list, range 120-160 (default: 135C) --monitor|-m <arg> Use custom pipe cmd for output messages --nfu-bits <arg> Set nanofury bits for overclocking, range 32-63 (default: 50) --net-delay Impose small delays in networking to not overload slow routers --no-submit-stale Don't submit shares if they are detected as stale --osm-led-mode <arg> Set LED mode for OneStringMiner devices (default: 4) --pass|-p <arg> Password for bitcoin JSON-RPC server --per-device-stats Force verbose mode and output per-device statistics --protocol-dump|-P Verbose dump of protocol-level activities --queue|-Q <arg> Minimum number of work items to have queued (0+) (default: 1) --quiet|-q Disable logging output, display status and errors --quota|-U <arg> quota;URL combination for server with load-balance strategy quotas --real-quiet Disable all output --rock-freq <arg> Set RockMiner frequency in MHz, range 200-400 (default: 270) --rotate <arg> Change multipool strategy from failover to regularly rotate at N minutes (default: 0) --round-robin Change multipool strategy from failover to round robin on failure --scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: -1) --sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time) --sched-stop <arg> Set a time of day in HH:MM to stop mining (will quit without a start time) --sharelog <arg> Append share log to file --shares <arg> Quit after mining N shares (default: unlimited) --socks-proxy <arg> Set socks4 proxy (host:port) --suggest-diff <arg> Suggest miner difficulty for pool to user (default: none) --syslog Use system log for output messages (default: standard error) --temp-cutoff <arg> Temperature where a device will be automatically disabled, one value or comma separated list (default: 95) --text-only|-T Disable ncurses formatted screen output --url|-o <arg> URL for bitcoin JSON-RPC server --usb <arg> USB device selection --user|-u <arg> Username for bitcoin JSON-RPC server --userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server --verbose Log verbose output to stderr as well as status output --widescreen Use extra wide display without toggling --worktime Display extra work time debug information Options for command line only: --config|-c <arg> Load a JSON-format configuration file See example.conf for an example configuration. --default-config <arg> Specify the filename of the default config file Loaded at start and used when saving without a name. --help|-h Print this message --ndevs|-n Display all USB devices and exit --version|-V Display version and exit Silent USB device (ASIC and FPGA) options: --icarus-options <arg> Set specific FPGA board configurations - one set of values for all or comma separated --icarus-timing <arg> Set how the Icarus timing is calculated - one setting/value for all or comma separated --usb-dump (See FPGA-README) See FGPA-README or ASIC-README for more information regarding these. ASIC only options: --anu-freq <arg> Set AntminerU1/2 frequency in MHz, range 125-500 (default: 250.0) --au3-freq <arg> Set AntminerU3 frequency in MHz, range 100-250 (default: 225.0) --au3-volt <arg> Set AntminerU3 voltage in mv, range 725-850, 0 to not set (default: 750) --avalon-auto Adjust avalon overclock frequency dynamically for best hashrate --avalon-cutoff <arg> Set avalon overheat cut off temperature (default: 60) --avalon-fan <arg> Set fanspeed percentage for avalon, single value or range (default: 20-100) --avalon-freq <arg> Set frequency range for avalon-auto, single value or range --avalon-options <arg> Set avalon options baud:miners:asic:timeout:freq:tech --avalon-temp <arg> Set avalon target temperature (default: 50) --avalon2-freq Set frequency range for Avalon2, single value or range --avalon2-voltage Set Avalon2 core voltage, in millivolts --avalon2-fan Set Avalon2 target fan speed --avalon2-cutoff <arg> Set Avalon2 overheat cut off temperature (default: 88) --avalon2-fixed-speed Set Avalon2 fan to fixed speed --avalon4-automatic-voltage Automatic adjust voltage base on module DH --avalon4-voltage Set Avalon4 core voltage, in millivolts, step: 125 --avalon4-freq Set frequency for Avalon4, 1 to 3 values, example: 445:385:370 --avalon4-fan Set Avalon4 target fan speed range --avalon4-temp <arg> Set Avalon4 target temperature (default: 42) --avalon4-cutoff <arg> Set Avalon4 overheat cut off temperature (default: 65) --avalon4-polling-delay <arg> Set Avalon4 polling delay value (ms) (default: 20) --avalon4-ntime-offset <arg> Set Avalon4 MM ntime rolling max offset (default: 4) --avalon4-aucspeed <arg> Set Avalon4 AUC IIC bus speed (default: 400000) --avalon4-aucxdelay <arg> Set Avalon4 AUC IIC xfer read delay, 4800 ~= 1ms (default: 9600) --avalon7-voltage Set Avalon7 default core voltage, in millivolts, step: 78 --avalon7-voltage-level Set Avalon7 default level of core voltage, range:[0, 15], step: 1 --avalon7-voltage-offset Set Avalon7 default offset of core voltage, range:[-2, 1], step: 1 --avalon7-freq Set Avalon7 default frequency, range:[24, 1404], step: 12, example: 500 --avalon7-freq-sel <arg> Set Avalon7 default frequency select, range:[0, 5], step: 1, example: 3 (default: 0) --avalon7-fan Set Avalon7 target fan speed, range:[0, 100], step: 1, example: 0-100 --avalon7-temp <arg> Set Avalon7 target temperature, range:[0, 100] (default: 99) --avalon7-polling-delay <arg> Set Avalon7 polling delay value (ms) (default: 20) --avalon7-aucspeed <arg> Set AUC3 IIC bus speed (default: 400000) --avalon7-aucxdelay <arg> Set AUC3 IIC xfer read delay, 4800 ~= 1ms (default: 19200) --avalon7-smart-speed <arg> Set Avalon7 smart speed, range 0-1. 0 means Disable (default: 1) --avalon7-th-pass <arg> Set A3212 th pass value (default: 162) --avalon7-th-fail <arg> Set A3212 th fail value (default: 10921) --avalon7-th-init <arg> Set A3212 th init value (default: 32767) --avalon7-th-ms <arg> Set A3212 th ms value (default: 1) --avalon7-th-timeout <arg> Set A3212 th timeout value (default: 0) --avalon7-iic-detect Enable Avalon7 detect through iic controller --avalon7-freqadj-time <arg> Set Avalon7 check interval when run in AVA7_FREQ_TEMPADJ_MODE (default: 60) --avalon7-delta-temp <arg> Set Avalon7 delta temperature when reset freq in AVA7_FREQ_TEMPADJ_MODE (default: 0) --avalon7-delta-freq <arg> Set Avalon7 delta freq when adjust freq in AVA7_FREQ_TEMPADJ_MODE (default: 100) --avalon7-freqadj-temp <arg> Set Avalon7 check temperature when run into AVA7_FREQ_TEMPADJ_MODE (default: 104) --avalon7-nonce-mask <arg> Set A3212 nonce mask, range 24-32. (default: 31) --no-avalon7-asic-debug Disable A3212 debug. --avalon8-voltage-level Set Avalon8 default level of core voltage, range:[0, 15], step: 1 --avalon8-voltage-level-offset Set Avalon8 default offset of core voltage level, range:[-2, 1], step: 1 --avalon8-freq Set Avalon8 default frequency, range:[25, 1200], step: 25, example: 800 --avalon8-freq-sel <arg> Set Avalon8 default frequency select, range:[0, 3], step: 1, example: 3 (default: 3) --avalon8-fan Set Avalon8 target fan speed, range:[0, 100], step: 1, example: 0-100 --avalon8-temp <arg> Set Avalon8 target temperature, range:[0, 100] (default: 90) --avalon8-polling-delay <arg> Set Avalon8 polling delay value (ms) (default: 20) --avalon8-aucspeed <arg> Set AUC3 IIC bus speed (default: 400000) --avalon8-aucxdelay <arg> Set AUC3 IIC xfer read delay, 4800 ~= 1ms (default: 19200) --avalon8-smart-speed <arg> Set Avalon8 smart speed, range 0-1. 0 means Disable (default: 1) --avalon8-th-pass <arg> Set A3210 th pass value (default: -1) --avalon8-th-fail <arg> Set A3210 th fail value (default: -1) --avalon8-th-init <arg> Set A3210 th init value (default: 32767) --avalon8-th-ms <arg> Set A3210 th ms value (default: 5) --avalon8-th-timeout <arg> Set A3210 th timeout value (default: 4294967295) --avalon8-th-add <arg> Set A3210 th add value (default: 1) --avalon8-iic-detect Enable Avalon8 detect through iic controller --avalon8-nonce-mask <arg> Set A3210 nonce mask, range 24-32. (default: -1) --avalon8-nonce-check <arg> Set A3210 nonce check, range 0-1. (default: 1) --avalon8-roll-enable <arg> Set A3210 roll enable, range 0-1. (default: 1) --avalon8-mux-l2h <arg> Set Avalon8 mux l2h, range 0-2. (default: 0) --avalon8-mux-h2l <arg> Set Avalon8 mux h2l, range 0-1. (default: 1) --avalon8-h2ltime0-spd <arg> Set Avalon8 h2ltime0 spd, range 0-255. (default: 3) --avalon8-spdlow <arg> Set Avalon8 spdlow, range 0-3. (default: -1) --avalon8-spdhigh <arg> Set Avalon8 spdhigh, range 0-3. (default: 3) --avalon8-cinfo-asic Set Avalon8 cinfo asic index, range:[0, 25], step: 1 --avalon8-pid-p <arg> Set Avalon8 pid-p, range 0-9999. (default: 2) --avalon8-pid-i <arg> Set Avalon8 pid-i, range 0-9999. (default: 5) --avalon8-pid-d <arg> Set Avalon8 pid-d, range 0-9999. (default: 0) --bab-options <arg> Set BaB options max:def:min:up:down:hz:delay:trf --bflsc-overheat <arg> Set overheat temperature where BFLSC devices throttle, 0 to disable (default: 90) --bitburner-fury-options <arg> Override avalon-options for BitBurner Fury boards baud:miners:asic:timeout:freq --bitburner-fury-voltage <arg> Set BitBurner Fury core voltage, in millivolts --bitburner-voltage <arg> Set BitBurner (Avalon) core voltage, in millivolts --bitmine-a1-options <ref_clk>:<sys_clk>:<spi_clk>:<max_chip> --bxf-temp-target <arg> Set target temperature for BXF devices (default: 82) --bxm-bits <arg> Set BXM bits for overclocking (default: 50) --compac-freq <arg> Set GekkoScience Compac frequency in MHz, range 100-500 (default: 150.0) --dragonmint-t1-options <arg> Dragonmint T1 options ref_clk_khz:sys_clk_khz:spi_clk_khz:override_chip_num --T1efficient Tune Dragonmint T1 per chain voltage and frequency for optimal efficiency --T1noauto Disable Dragonmint T1 per chain auto voltage and frequency tuning --T1performance Tune Dragonmint T1 per chain voltage and frequency for maximum performance --T1fantarget <arg> Throttle T1 frequency to keep fan less than target fan speed (default: 100) --T1Pll1 <arg> Set PLL Clock 1 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll2 <arg> Set PLL Clock 2 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll3 <arg> Set PLL Clock 3 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll4 <arg> Set PLL Clock 4 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll5 <arg> Set PLL Clock 5 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll6 <arg> Set PLL Clock 6 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll7 <arg> Set PLL Clock 7 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Pll8 <arg> Set PLL Clock 8 in Dragonmint T1 broad 1 chip (-1: 1000MHz, >0:Lookup PLL table) (default: 1332) --T1Volt1 <arg> Dragonmint T1 set voltage 1 - VID overrides if set (390-425) (default: 404) --T1Volt2 <arg> Dragonmint T1 set voltage 2 - VID overrides if set (390-425) (default: 404) --T1Volt3 <arg> Dragonmint T1 set voltage 3 - VID overrides if set (390-425) (default: 404) --T1Volt4 <arg> Dragonmint T1 set voltage 4 - VID overrides if set (390-425) (default: 404) --T1Volt5 <arg> Dragonmint T1 set voltage 5 - VID overrides if set (390-425) (default: 404) --T1Volt6 <arg> Dragonmint T1 set voltage 6 - VID overrides if set (390-425) (default: 404) --T1Volt7 <arg> Dragonmint T1 set voltage 7 - VID overrides if set (390-425) (default: 404) --T1Volt8 <arg> Dragonmint T1 set voltage 8 - VID overrides if set (390-425) (default: 404) --T1VID1 <arg> Dragonmint T1 set VID 1 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID2 <arg> Dragonmint T1 set VID 2 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID3 <arg> Dragonmint T1 set VID 3 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID4 <arg> Dragonmint T1 set VID 4 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID5 <arg> Dragonmint T1 set VID 5 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID6 <arg> Dragonmint T1 set VID 6 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID7 <arg> Dragonmint T1 set VID 7 in noauto - Overrides voltage if set (1-31) (default: 0) --T1VID8 <arg> Dragonmint T1 set VID 8 in noauto - Overrides voltage if set (1-31) (default: 0) --hfa-hash-clock <arg> Set hashfast clock speed (default: 550) --hfa-fail-drop <arg> Set how many MHz to drop clockspeed each failure on an overlocked hashfast device (default: 10) --hfa-fan <arg> Set fanspeed percentage for hashfast, single value or range (default: 10-85) --hfa-name <arg> Set a unique name for a single hashfast device specified with --usb or the first device found --hfa-noshed Disable hashfast dynamic core disabling feature --hfa-temp-overheat <arg> Set the hashfast overheat throttling temperature (default: 95) --hfa-temp-target <arg> Set the hashfast target temperature (0 to disable) (default: 88) --hro-freq Set the hashratio clock frequency (default: 280) --klondike-options <arg> Set klondike options clock:temptarget --rock-freq <arg> Set RockMiner frequency in MHz, range 125-500 (default: 270) See ASIC-README for more information regarding these. FPGA only options: --bfl-range Use nonce range on bitforce devices if supported See FGPA-README for more information regarding this. Cgminer should automatically find all of your Avalon ASIC, BFL ASIC, BitForce FPGAs, Icarus bitstream FPGAs, Klondike ASIC, ASICMINER usb block erupters, KnC ASICs, BaB ASICs, Hashfast ASICs, ModMiner FPGAs, BPMC/BGMC BF1 USB ASICs, Bi*fury USB ASICs, Onestring miner USB ASICs, Hexfury USB ASICs, Nanofury USB ASICs, Antminer U1/U2/U2+ U3 USB ASICs, Cointerra devices, BFx2 USB ASICs, Rockminer R-Box/RK-Box/T1 USB ASICs, Avalon2/3/4 USB ASICs and Hashratio USB ASICs. --- SETTING UP USB DEVICES on WINDOWS/LINUX/OSX WINDOWS: On windows, the direct USB support requires the installation of a WinUSB driver (NOT the ftdi_sio driver), and attaching it to the chosen USB device. When configuring your device, plug it in and wait for windows to attempt to install a driver on its own. It may think it has succeeded or failed but wait for it to finish regardless. If the driver doesn't allow mining, cgminer will get a "USB init," error message i.e. one of: open device failed, err %d, you need to install a WinUSB driver for the device or claim interface %d failed, err %d This means you need to associate your device with the WinUSB driver. The best solution for this is to use a tool called Zadig to set the driver: https://sourceforge.net/projects/libwdi/files/zadig/ They've moved the latest versions to: https://zadig.akeo.ie/ This allows you set the driver for the device to be WinUSB which is required to make it work if you're having problems. With Zadig, you will need to run it as administrator and if your device is plugged in but you cannot see it, use the Menu: Options -> List All Devices and you should be able to see the device in the drop down list as something like: "CompacF Bitcoin Miner" Choose the install or replace driver option and select WinUSB. When you first switch a device over to WinUSB with Zadig and it shows that correctly on the left of the Zadig window, but it still gives permission errors, you may need to unplug the USB miner and then plug it back in. Some users may need to reboot at this point. LINUX: The short version: sudo cp 01-cgminer.rules /etc/udev/rules.d/ The long version: On linux, the direct USB support requires no drivers at all. However due to permissions issues, you may not be able to mine directly on the devices as a regular user without giving the user access to the device or by mining as root (administrator). In order to give your regular user access, you can make him a member of the plugdev group with the following commands: sudo usermod -G plugdev -a `whoami` If your distribution does not have the plugdev group you can create it with: sudo groupadd plugdev In order for the USB devices to instantly be owned by the plugdev group and accessible by anyone from the plugdev group you can copy the file "01-cgminer.rules" from the cgminer archive into the /etc/udev/rules.d directory with the following command: sudo cp 01-cgminer.rules /etc/udev/rules.d/ After this you can either manually restart udev and re-login, or more easily just reboot. OSX: On OSX, like Linux, no drivers need to be installed. However some devices like the bitfury USB sticks automatically load a driver thinking they're a modem and the driver needs to be unloaded for cgminer to work: sudo kextunload -b com.apple.driver.AppleUSBCDC sudo kextunload -b com.apple.driver.AppleUSBCDCACMData If you are running an old Mac and desktop performance is noticeably affected, adding the --mac-yield option may help, but also may slow down mining. There may be a limit to the number of USB devices that you are allowed to start. The following set of commands, followed by a reboot will increase that: sudo su touch /etc/sysctl.conf echo kern.sysv.semume=100 >> /etc/sysctl.conf chown root:wheel /etc/sysctl.conf chmod 0644 /etc/sysctl.conf Some devices need superuser access to mine on them so cgminer may need to be started with sudo i.e.: sudo cgminer <insert commands here> There is a hidden option in cgminer to dump out a lot of information about USB that will help the developers to assist you if you are having problems: --usb-dump 0 It will only help if you have a working USB mining device --- Advanced USB options: The --usb option can restrict how many USB devices are found: --usb 1:2,1:3,1:4,1:* or --usb BAS:1,BFL:1,MMQ:0,ICA:0,KLN:0 or --usb :10 You can only use one of the above 3 The first version --usb 1:2,1:3,1:4,1:* allows you to select which devices to mine on with a list of USB bus_number:device_address All other USB devices will be ignored Hotplug will also only look at the devices matching the list specified and find nothing new if they are all in use You can specify just the USB bus_number to find all devices like 1:* which means any devices on USB bus_number 1 This is useful if you unplug a device then plug it back in the same port, it usually reappears with the same bus_number but a different device_address You can see the list of all USB devices on linux with 'sudo lsusb' Cgminer will list the recognised USB devices with the '-n' option or the '--usb-dump 0' option The '--usb-dump N' option with a value of N greater than 0 will dump a lot of details about each recognised USB device If you wish to see all USB devices, include the --usb-list-all option The second version --usb BAS:1,BFL:1,MMQ:0,ICA:0,KLN:0 allows you to specify how many devices to choose based on each device driver cgminer has - the current USB drivers are: AVA, BAS, BFL, BF1, DRB, HFA, ICA, KLN and MMQ. N.B. you can only specify which device driver to limit, not the type of each device, e.g. with BAS:n you can limit how many BFL ASIC devices will be checked, but you cannot limit the number of each type of BFL ASIC Also note that the MMQ count is the number of MMQ backplanes you have not the number of MMQ FPGAs The third version --usb :10 means only use a maximum of 10 devices of any supported USB devices Once cgminer has 10 devices it will not configure any more and hotplug will not scan for any more If one of the 10 devices stops working, hotplug - if enabled, as is default - will scan normally again until it has 10 devices --usb :0 will disable all USB I/O other than to initialise libusb --- SCREEN DISPLAY WHILE RUNNING: The following options are available while running with a single keypress: [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit U gives you: [S]ummary of device information [E]nable device [D]isable device [U]nplug to allow hotplug restart [R]eset device USB [L]ist all known devices [B]lacklist current device from current instance of cgminer [W]hitelist previously blacklisted device [H]otplug interval (0 to disable) P gives you: Current pool management strategy: Failover [F]ailover only disabled [A]dd pool [R]emove pool [D]isable pool [E]nable pool [C]hange management strategy [S]witch pool [I]nformation S gives you: [Q]ueue: 1 [S]cantime: 60 [E]xpiry: 120 [W]rite config file [C]gminer restart D gives you: [N]ormal [C]lear [S]ilent mode (disable all output) [D]ebug:off [P]er-device:off [Q]uiet:off [V]erbose:off [R]PC debug:off [W]orkTime details:off co[M]pact: off [T]oggle status switching:enabled [Z]ero statistics [L]og interval:5 Q quits the application. The running log shows output like this: [2013-11-09 11:04:41] Accepted 01b3bde7 Diff 150/128 AVA 1 pool 0 [2013-11-09 11:04:49] Accepted 015df995 Diff 187/128 AVA 1 pool 0 [2013-11-09 11:04:50] Accepted 01163b68 Diff 236/128 AVA 1 pool 0 [2013-11-09 11:04:53] Accepted 9f745840 Diff 411/128 BAS 1 pool 0 The 8 byte hex value are the 1st nonzero bytes of the share being submitted to the pool. The 2 diff values are the actual difficulty target that share reached followed by the difficulty target the pool is currently asking for. --- Also many issues and FAQs are covered in the forum thread dedicated to this program, http://forum.bitcoin.org/index.php?topic=28402.0 DISPLAY: The display is roughly split into two portions, the top status window and the bottom scrolling log window. STATUS WINDOW The status window is split into overall status and per device status. Overall status: The output line shows the following: (5s):1.398T (1m):1.322T (5m):1.305T (15m):1.309T (avg):1.317Th/s These are exponentially decaying average hashrates over 5s/1m/5m/15m and an average since the start. Followed by: A:290391 R:5101 HW:145 WU:37610.4/m Each column is as follows: A: The total difficulty of Accepted shares R: The total difficulty of Rejected shares HW: The number of HardWare errors WU: The Work Utility defined as the number of diff1 shares work / minute (accepted or rejected). alternating with: ST: 22 SS: 0 NB: 2 LW: 356090 GF: 0 RF: 0 ST is STaged work items (ready to use). SS is Stale Shares discarded (detected and not submitted so don't count as rejects) NB is New Blocks detected on the network LW is Locally generated Work items GF is Getwork Fail Occasions (server slow to provide work) RF is Remote Fail occasions (server slow to accept work) Followed by: Connected to stratum.kano.is diff 3.45K with stratum as user Kano The diff shown is the current vardiff requested by the pool currently being mined at. Followed by: Block: b1a8c743... Diff:19T Started: [00:14:27.666] Best share: 1.18M This shows a short stretch about the current block, when the new block started, and the all time best difficulty share you've found since starting cgminer this time. Per device status: 0: GSF 100nnnnn: 400.00MHz 85C 13% 0.79V | 263.5G / 263.7Gh/s WU:18901.8/m Each column is as follows: Temperature (if supported) Fanspeed (if supported) Voltage (if supported) A 5 second exponentially decaying average hash rate An all time average hash rate The work utility defined as the number of diff1 shares work / minute alternating with 0: GSF 100nnnnn: 400.00MHz 86C 13% 0.80V | A:290348 R:1067 HW:88 The total difficulty of accepted shares The total difficulty of rejected shares The number of hardware erorrs LOG WINDOW All running information is shown here, usually share submission results and block update notifications, along with device messages and warnings. [2021-09-27 11:59:04.397] Accepted 1397768d Diff 3.35K/727 GSF 0 pool 0 [2021-09-27 12:59:05.397] Stratum from pool 0 detected new block at height 702417 --- MULTIPLE POOL CONNECTIONS FAILOVER STRATEGIES WITH MULTIPOOL: A number of different strategies for dealing with multipool setups are available. Each has their advantages and disadvantages so multiple strategies are available by user choice, as per the following list: FAILOVER: The default strategy is failover. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will move back to the higher priority ones. ROUND ROBIN: This strategy only moves from one pool to the next when the current one falls idle and makes no attempt to move otherwise. ROTATE: This strategy moves at user-defined intervals from one active pool to the next, skipping pools that are idle. LOAD BALANCE: This strategy sends work to all the pools on a quota basis. By default, all pools are allocated equal quotas unless specified with --quota. This apportioning of work is based on work handed out, not shares returned so is independent of difficulty targets or rejected shares. While a pool is disabled or dead, its quota is dropped until it is re-enabled. Quotas are forward looking, so if the quota is changed on the fly, it only affects future work. If all pools are set to zero quota or all pools with quota are dead, it will fall back to a failover mode. See quota below for more information. The failover-only flag has special meaning in combination with load-balance mode and it will distribute quota back to priority pool 0 from any pools that are unable to provide work for any reason so as to maintain quota ratios between the rest of the pools. BALANCE: This strategy monitors the amount of difficulty 1 shares solved for each pool and uses it to try to end up doing the same amount of work for all pools. --- QUOTAS The load-balance multipool strategy works off a quota based scheduler. The quotas handed out by default are equal, but the user is allowed to specify any arbitrary ratio of quotas. For example, if all the quota values add up to 100, each quota value will be a percentage, but if 2 pools are specified and pool0 is given a quota of 1 and pool1 is given a quota of 9, pool0 will get 10% of the work and pool1 will get 90%. Quotas can be changed on the fly by the API, and do not act retrospectively. Setting a quota to zero will effectively disable that pool unless all other pools are disabled or dead. In that scenario, load-balance falls back to regular failover priority-based strategy. While a pool is dead, it loses its quota and no attempt is made to catch up when it comes back to life. To specify quotas on the command line, pools should be specified with a semicolon separated --quota(or -U) entry instead of --url. Pools specified with --url are given a nominal quota value of 1 and entries can be mixed. For example: --url poola:porta -u usernamea -p passa --quota "2;poolb:portb" -u usernameb -p passb Will give poola 1/3 of the work and poolb 2/3 of the work. Writing configuration files with quotas is likewise supported. To use the above quotas in a configuration file they would be specified thus: "pools" : [ { "url" : "poola:porta", "user" : "usernamea", "pass" : "passa" }, { "quota" : "2;poolb:portb", "user" : "usernameb", "pass" : "passb" } ] --- SOLO MINING Solo mining doesn't currently work --- LOGGING cgminer will log to stderr if it detects stderr is being redirected to a file. To enable logging simply add 2>logfile.txt to your command line and logfile.txt will contain the logged output at the log level you specify (normal, verbose, debug etc.) In other words if you would normally use: ./cgminer -o xxx -u yyy -p zzz if you use ./cgminer -o xxx -u yyy -p zzz 2>logfile.txt it will log to a file called logfile.txt and otherwise work the same. There is also the -m option on linux which will spawn a command of your choice and pipe the output directly to that command. The WorkTime details 'debug' option adds details on the end of each line displayed for Accepted or Rejected work done. An example would be: <-00000059.ed4834a3 M:X D:1.0 G:17:02:38:0.405 C:1.855 (2.995) W:3.440 (0.000) S:0.461 R:17:02:47 The first 2 hex codes are the previous block hash, the rest are reported in seconds unless stated otherwise: The previous hash is followed by the getwork mode used M:X where X is one of P:Pool, T:Test Pool, L:LP or B:Benchmark, then D:d.ddd is the difficulty required to get a share from the work, then G:hh:mm:ss:n.nnn, which is when the getwork or LP was sent to the pool and the n.nnn is how long it took to reply, followed by 'O' on it's own if it is an original getwork, or 'C:n.nnn' if it was a clone with n.nnn stating how long after the work was recieved that it was cloned, (m.mmm) is how long from when the original work was received until work started, W:n.nnn is how long the work took to process until it was ready to submit, (m.mmm) is how long from ready to submit to actually doing the submit, this is usually 0.000 unless there was a problem with submitting the work, S:n.nnn is how long it took to submit the completed work and await the reply, R:hh:mm:ss is the actual time the work submit reply was received If you start cgminer with the --sharelog option, you can get detailed information for each share found. The argument to the option may be "-" for standard output (not advisable with the ncurses UI), any valid positive number for that file descriptor, or a filename. To log share data to a file named "share.log", you can use either: ./cgminer --sharelog 50 -o xxx -u yyy -p zzz 50>share.log ./cgminer --sharelog share.log -o xxx -u yyy -p zzz For every share found, data will be logged in a CSV (Comma Separated Value) format: timestamp,disposition,target,pool,dev,thr,sharehash,sharedata For example (this is wrapped, but it's all on one line for real): 1335313090,reject, ffffffffffffffffffffffffffffffffffffffffffffffffffffffff00000000, http://localhost:8337,ASC0,0, 6f983c918f3299b58febf95ec4d0c7094ed634bc13754553ec34fc3800000000, 00000001a0980aff4ce4a96d53f4b89a2d5f0e765c978640fe24372a000001c5 000000004a4366808f81d44f26df3d69d7dc4b3473385930462d9ab707b50498 f681634a4f1f63d01a0cd43fb338000000000080000000000000000000000000 0000000000000000000000000000000000000000000000000000000080020000 --- BENCHMARK The --benchmark option hashes a single fixed work item over and over and does not submit shares to any pools. The --benchfile <arg> option hashes the work given in the file <arg> supplied. The format of the work file is: version,merkleroot,prevhash,diffbits,noncetime Any empty line or any line starting with '#' or '/' is ignored. When it reaches the end of the file it continues back at the top. The format of the data items matches the byte ordering and format of the the bitcoind getblock RPC output. An example file containing bitcoin block #1 would be: # Block 1 1,0e3e2357e806b6cdb1f70b54c3a3a17b6714ee1f0e68bebb44a74b1efd512098,00000000001 9d6689c085ae165831e934ff763ae46a2a6c172b3f1b60a8ce26f,1d00ffff,1231469665 However, the work data should be one line without the linebreak in the middle If you use --benchfile <arg>, then --benchfile-display will output a log line, for each nonce found, showing the nonce value in decimal and hex and the work used to find it in hex. --- RPC API For RPC API details see the API-README file --- FAQ Q: Help, I've started cgminer and everything reads zero!? A: Welcome to bitcoin mining. Your computer by itself cannot mine bitcoin no matter how powerful it is. You have to purchase dedicated mining hardware called ASICs to plug into your computer. See Q regarding ASICs below. Q: I have multiple USB stick devices but I can't get them all to work at once? A: Very few USB hubs deliver the promised power required to run as many devices as they fit if all of them draw power from USB. Q: I've plugged my devices into my USB hub but nothing shows up? A: RPis and Windows have incomplete or non-standard USB3 support so they may never work. It may be possible to get a USB3 hub to work by plugging it into a USB2 hub. When choosing a hub, USB2 hubs are preferable whenever possible due to better support all round. Q: Can I mine on servers from different networks (eg xxxcoin and bitcoin) at the same time? A: No, cgminer keeps a database of the block it's working on to ensure it does not work on stale blocks, and having different blocks from two networks would make it invalidate the work from each other. Q: Can I configure cgminer to mine with different login credentials or pools for each separate device? A: No. Q: Can I put multiple pools in the config file? A: Yes, check the example.conf file. Alternatively, set up everything either on the command line or via the menu after startup and choose settings->write config file and the file will be loaded one each startup. Q: The build fails with gcc is unable to build a binary. A: Remove the "-march=native" component of your CFLAGS as your version of gcc does not support it. Also -O2 is capital o 2, not zero 2. Q: Work keeps going to my backup pool even though my primary pool hasn't failed? A: Cgminer checks for conditions where the primary pool is lagging and will pass some work to the backup servers under those conditions. The reason for doing this is to try its absolute best to keep the devices working on something useful and not risk idle periods. You can disable this behaviour with the option --failover-only. Q: Is this a virus? A: Cgminer is being packaged with other trojan scripts and some antivirus software is falsely accusing cgminer.exe as being the actual virus, rather than whatever it is being packaged with. If you installed cgminer yourself, then you do not have a virus on your computer. Complain to your antivirus software company. They seem to be flagging even source code now from cgminer as viruses, even though text source files can't do anything by themself. Q: Can you modify the display to include more of one thing in the output and less of another, or can you change the quiet mode or can you add yet another output mode? A: Everyone will always have their own view of what's important to monitor. The defaults are very sane and I have very little interest in changing this any further. There is far more detail in the API output than can be reasonably displayed on the small console window, and using an external interface such as miner.php is much more useful for setups with many devices. Q: What are the best parameters to pass for X pool/hardware/device. A: Virtually always, the DEFAULT parameters give the best results. Most user defined settings lead to worse performance. Q: What happened to CPU and GPU mining? A: Their efficiency makes them irrelevant in the bitcoin mining world today and the author has no interest in supporting alternative coins that are better mined by these devices. Q: GUI version? A: No. The RPC interface makes it possible for someone else to write one though, and miner.php can create web page access to the RPC API Q: I'm having an issue. What debugging information should I provide? A: Start cgminer with your regular commands and add -D -T --verbose and provide the full startup output and a summary of your hardware and operating system. Q: Why don't you provide win64 builds? A: Win32 builds work everywhere. Q: Is it faster to mine on windows or linux? A: It makes no difference in terms of performance. It comes down to choice of operating system for their various features and your comfort level. However linux is the primary development platform and is virtually guaranteed to be more stable. Q: My network gets slower and slower and then dies for a minute? A; Try the --net-delay option if you are on a GBT server. This does nothing with stratum mining. Q: I run PHP on windows to access the API with the example miner.php. Why does it fail when php is installed properly but I only get errors about Sockets not working in the logs? A: http://us.php.net/manual/en/sockets.installation.php Q: What is an ASIC? A: They are Application Specify Integrated Circuit devices and provide the highest performance per unit power due to being dedicated to only one purpose. They are the only meaningful way to mine bitcoin today. Q: What is stratum and how do I use it? A: Stratum is a protocol designed for pooled mining in such a way as to minimise the amount of network communications, yet scale to hardware of any speed. With versions of cgminer 2.8.0+, if a pool has stratum support, cgminer will automatically detect it and switch to the support as advertised if it can. The advantages of stratum to the miner are no delays in getting more work for the miner, less rejects across block changes, and far less network communications for the same amount of mining hashrate. If you do NOT wish cgminer to automatically switch to stratum protocol even if it is detected, add the --fix-protocol option. Q: Why don't the statistics add up: Accepted, Rejected, Stale, Hardware Errors, Diff1 Work, etc. when mining greater than 1 difficulty shares? A: As an example, if you look at 'Difficulty Accepted' in the RPC API, the number of difficulty shares accepted does not usually exactly equal the amount of work done to find them. If you are mining at 8 difficulty, then you would expect on average to find one 8 difficulty share, per 8 single difficulty shares found. However, the number is actually random and converges over time, it is an average, not an exact value, thus you may find more or less than the expected average. Q: My keyboard input momentarily pauses or repeats keys every so often on windows while mining? A: The USB implementation on windows can be very flaky on some hardware and every time cgminer looks for new hardware to hotplug it it can cause these sorts of problems. You can disable hotplug with: --hotplug 0 Q: What is a PGA? A: Cgminer supports 3 FPGAs: BitForce, Icarus and ModMiner. They are Field-Programmable Gate Arrays that have been programmed to do Bitcoin mining. Since the acronym needs to be only 3 characters, the "Field-" part has been skipped. Q: What should my Work Utility (WU) be? A: Work utility is the product of hashrate * luck and only stabilises over a very long period of time. Assuming all your work is valid work, bitcoin mining should produce a work utility of approximately 1 per 71.6MH. This means at 5GH you should have a WU of 5000 / 71.6 or ~ 69. You cannot make your machine do "better WU" than this - it is luck related. However you can make it much worse if your machine produces a lot of hardware errors producing invalid work. Q: What should I build in for a generic distribution binary? A: There are a number of drivers that expect to be used on dedicated standalone hardware. That said, the drivers that are designed to work generically with USB on any hardware are the following: --enable-avalon --enable-avalon2 --enable-avalon4 --enable-avalon7 --enable-avalon8 --enable-bflsc --enable-bitfury --enable-cointerra --enable-drillbit --enable-gekko --enable-hashfast --enable-hashratio --enable-icarus --enable-klondike Q: How do I use the --decode function to decode a pool's coinbase? A: You need to have a bitcoind with server functionality and pass it the credentials as the first pool in your config, and pass the pool's address that you wish to decode as the second pool configured. Note the bitcoind NEEDS the http:// prefix. e.g.: ./cgminer -o http://localhost:8332 -u user -p pass -o stratum.kano.is:3333 -u cgminer --decode --- This code is provided entirely free of charge by the programmers. If you wish to support it, simply mine at https://kano.is/
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.