stereo "tape" delay/looper thing for norns
join the conversation at - https://llllllll.co/t/22149
there are three pages, mix, play, and edit. navigate with encoder 1. hold key 1 for ALT.
-
key 2 = mute L
-
key 3 = mute R
-
enc 2 = vol L
-
enc 3 = vol R
-
ALT + enc 2 = pan L
-
ALT + enc 3 = pan R
-
key 2 = flip L
-
key 3 = flip R
-
ALT + key 2 = skip L
-
ALT + key 2 = skip R
-
enc 2 = tape speed L
-
enc 3 = tape speed R
-
ALT + enc 2 = feedback L
-
ALT + enc 3 = feedback R
nb: tape speed behavior by default is free; however, it can be quantized to octaves via the parameters menu. skip behavior by default is a loop reset; however, it can be configured to jump to random positions via the parameters menu.
-
key 2 = rec L on/off
-
key 3 rec R on/off
-
ALT + key 2 = clear buffer L
-
ALT + key 3 = clear buffer R
-
enc 2 = tape length L
-
enc 3 = tape length R
-
ALT + enc 2 = skip config
-
ALT + enc 3 = speed config
nb: turning rec L/R off will hold the buffer, allowing use as a looper.
L/R loops are laid out identically:
touch a key inside the "loop posistion" area to jump to that point in the loop.
to "patch" an lfo:
- hold an lfo on button
- touch a control
while holding an lfo on button you can edit lfo parameters with the norns encoders and keys:
-
enc 1: lfo speed/frequency
-
enc 2: lfo depth
-
enc 3: lfo offset
-
key 2/3: set lfo shape
holding the grid alt button and pressing in the lfo section will "un-patch" the lfo.
holding the grid alt button and touching any speed button will return speed to 1.
holding the grid alt button and turning enc 2/3 will "slide" your L/R loops around the buffer.