ammcoariauniversal / aria-satellites-quetzal1-hardware

Hardware design files for satellite the Quetzal-1 mission.

Quetzal-1 Hardware

For an overview of Quetzal-1, read our profile!

Directory Description

This repository serves as the central location for all hardware design files for the Quetzal-1 satellite. We are indebted to the open-source community, as a large part of the hardware and software was inspired and based on open-source platforms, such as Arduino, and libraries written by its ever-expanding community.

The hardware files for the following subsystems are included in this repository:

1. ADCS: contains the hardware design files for the Attitude Determination and Control System (ADCS).
2. EPS: contains the hardware design files for the Electrical Power System (EPS).
3. ADM: contains the hardware design files for the Antenna Deployment Mechanism (ADM).
4. media: contains miscellaneous photos relating to the satellite in general, that may be of use and serve as reference to the user.

Internal Part Naming Scheme

Each Printed Circuit Board (PCB) in the design was tracked according to an internal part number (P/N), which is referenced throughout this repository and especially in the hardware source files. It is as follows:

System	P/N	Description
ADCS	PT-MIS-PCB-001	The ADCS PCB, in charge of passive attitude control and attitude determination.
EPS	PT-PWR-EPS-002	The main EPS PCB, in charge of energy harvesting, storage and distribution. ℹ️ Sometimes also referenced as PT-MIS-PCB-002.
EPS	PT-MIS-PCB-003, -005 through -008	The solar panel PCBs for all axes except Z-.
EPS/ADM	PT-MIS-PCB-004	PCB containing both the Z- solar panel and the ADM.

How should you cite this repository?

You may cite this repository as shown below. Further information is available in the CITATION.cff file.

Quetzal-1 CubeSat Team. (2022). Quetzal-1 Hardware. https://github.com/Quetzal-1-CubeSat-Team/quetzal1-hardware

Available Repositories

Repository	Description
quetzal1-hardware	This repository.
quetzal1-flight-software	Contains the software for Quetzal-1 and its subsystems.
quetzal1-telemetry	Contains the telemetry and photos transmitted by Quetzal-1 while in orbit.
gr-quetzal1	Contains the software used on the Ground Control Station for Quetzal-1, based on GNURadio.