amro / gibbon Goto Github PK

View Code? Open in Web Editor NEW

1.1K 1.1K 166.0 393 KB

Gibbon is an API wrapper for MailChimp's API

Home Page: https://github.com/amro/gibbon

License: MIT License

Ruby 100.00%

gibbon's People

Contributors

Stargazers

Watchers

Forkers

josal dromano elshimone ippy04 jaakkos basgys pgericson uchoaaa ibroadfo skalnik rkyrychuk krsmurata guniorobot shahidnajam jlxw asanghi austinbv chimpchamp erikeliason rpontes nellshamrell foretaster letstalk usmanasif uriasn paperlesspost amaliahern utoppo ehoffmann kellydunn byliner adamp83 enharper sanemat killthekitten kirs ericchen hoffm mscifo nazmir linojon stevenbarragan kale eriktrautman envylabs rorliz rubycon-by nicholaide analyticspierce ahmad-hussain-confiz oakstudios duggiefresh leakybucket nazark shanmugarajan batchblue ryane cwjenkins alfadoblemas arthurtalkgoal excid3 pixard stephenhmarsh mgasiorek jonnylim1437 lime dheeraj510 jc4p mscoutermarsh fsluis srbiv accessd jiexinhuang michaeldawson yez ishank18 wadetandy firmanm lest fonemstr olivierlacan mameier josescasanova sb-archive scottwater froesecom trumaker joeltaylor dpsk rogiervandenberg current-rms dimanyc nickdowse zawaideh zaparka radcliff redguava flivni cruglobal rohanm

gibbon's Issues

listSubscribe with custom merge vars not saving custom merge_vars

The line below works and saves everything to mail chimp except the custom "website" value I added. Am I missing something. I derived this by looking at mailchimps 1.3 documentation.

Thanks

gb.listSubscribe({:id => 'XXXX',:email_address => '[email protected]',:double_optin => :false, :merge_vars => {:fname => 'Billy', :lname => 'Smith',:phone => '555-234-2323', :website => 'https://www.example.com'} })

how to 'send'?

Hi, i have a campaign and want to send it (http://apidocs.mailchimp.com/api/2.0/campaigns/send.php) but doing

gb.campaigns.send cid

thinks its calling the Ruby #send method! How do i pass it through to MailChimp?

Support API 2.0

Today Mailchimp launches the 2.0 API, which differs from the 1.3 version. I'm new to Mailchimp and I want to start development with the edge version (when our stuff will go to production, the edge will be already stable).

I'm trying to decide which gem should I use and I want to know, will gibbon have support of the 2.0 API or not. If it will be so, then what must be changed and how can I contribute?

Thank you.

"new" syntax needs to be changed in readme?

In Rails 2.3.11 I found that instead of

Gibbon.new(API_KEY)

as specified in the Readme, I needed to do

Gibbon:API.new(API_KEY)

Issue with welcome email not being sent

gb.lists.subscribe({:id => list_id, :email => {:email => 'email_address'}, :merge_vars => {:FNAME => 'First Name', :LNAME => 'Last Name'}, :double_optin => false})

When using the code above the welcome email is not sent even though in the readme it says that it will.

undefined method `dump' for MultiJson:Module

API calls fail for me because of an apparent multi_json issue.

Some of my reading suggests that Farraday and Httparty can't existing together. Is this true?

Also, I've got sever versions of multi_json installed in this project

multi_json (1.6.1, 1.5.0, 1.3.7, 1.3.6, 1.3.5, 1.3.4, 1.3.2, 1.1.0, 1.0.4)

It's conceivable that Gibbon is using the wrong one. Is it possible to specify the correct version of multi_json to use? Which version would you recommend?

Trace:

1.9.2p290 :002 > campaigns = gb.campaigns({:start => 0, :limit => 100})
NoMethodError: undefined method dump' for MultiJson:Module from /Users/eblatt/.rvm/gems/ruby-1.9.2-p290/gems/gibbon-0.4.4/lib/gibbon.rb:41:incall'
from /Users/eblatt/.rvm/gems/ruby-1.9.2-p290/gems/gibbon-0.4.4/lib/gibbon.rb:66:in `method_missing'
from (irb):2

Rejects emails with plus signs

Any email that contains a plus sign (which is actually valid) MailChimp sends back an "email invalid" error message. When using the form from MailChimp there are no problems with this. So I guess this is about how gibbon processes the data for transmission.

Given a list, how do I obtain the groups for it and the subscribe to them?

I have a list. That has multiple groups and each group has 2-3 groups. I want to get the first group and then the next group and subscribe to that. How can I obtain this with this api?

RubyGems version does not match docs

A few folks (including me) have run into an issue where adding gem 'gibbon' to their gemfile is pulling down the older version of Gibbon, which is out of sync with the current docs.

I understand you're updating Gibbon for the new 2.0 API (and thank you for doing it!), but you may want to update the Readme to reflect the fact that people need to download from github vs. rubygems to get the features discussed in the doc.

See StackOverflow describing this issue here: http://stackoverflow.com/questions/17228587/why-does-gibbon-throw-uninitialized-constant-gibbonapi-nameerror/

Thanks again for your work on Gibbon! <3

Yet another SSL::SSLError issue

Hi,

if call gb = Gibbon::API.new('XXXXXXXXXXXXXXXXXXX-us4') get:

OpenSSL::SSL::SSLError (hostname "us1.api.mailchimp.com." does not match the server certificate):

note us1in the url. This happens both with api_keys created with mailchimp panel that those generated with omniauth-mailchimp.

Have tried also with:

      token = 'xxxxxxxxxxxxxxxx-us4'
      gb = Gibbon::API.new(token, {api_endpoint:
        "https://#{token.split(//).last(3).join}.api.mailchimp.com."})

Same error but in this case the url have us4.

More sensible exceptions to easier error-handling

Hello there,

Thanks for this awesome project, it have helped us a lot during our work.

However, we have a problem, with errors like this:

<Gibbon::MailChimpError: MailChimp API Error: [email protected] 
is already subscribed to list Developer test. <a href="http://billetto.us5.
list-manage.com/subscribe/send-email?u=SOMETHING&id=SOMETHING_ELSE&e=SOMETHING_ELSE2=">Click here to update your profile.
</a>(code 214)>

We are not interested in exactly this error to show up in our exception-list. This is a user error, that we want to ignore when we see it.

To catch an exception like this is pretty darn ugly because we will have to put it in a wrapper and actually look a the return, or the error code ((code 214)).

Could we push for some more sensible exceptions?

There is a lot of exceptions to take care of: http://apidocs.mailchimp.com/api/rtfm/exceptions.field.php

undefined method `new' for Gibbon:Module (NoMethodError)

Latest version of gibbon gem gives me this error below. Reverted back to 0.4.6 to.

$ rails c
/Users/liouyang/Development/code/Walker/goatee/config/initializers/mailchimp.rb:1:in `<top (required)>': undefined method `new' for Gibbon:Module (NoMethodError)
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:222:in `load'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:222:in `block in load'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:213:in `load_dependency'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:222:in `load'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/engine.rb:609:in `block (2 levels) in <class:Engine>'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/engine.rb:608:in `each'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/engine.rb:608:in `block in <class:Engine>'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/initializable.rb:30:in `instance_exec'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/initializable.rb:30:in `run'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/initializable.rb:55:in `block in run_initializers'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:150:in `block in tsort_each'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:183:in `block (2 levels) in each_strongly_connected_component'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:210:in `block (2 levels) in each_strongly_connected_component_from'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:219:in `each_strongly_connected_component_from'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:209:in `block in each_strongly_connected_component_from'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/initializable.rb:44:in `each'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/initializable.rb:44:in `tsort_each_child'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:203:in `each_strongly_connected_component_from'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:182:in `block in each_strongly_connected_component'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:180:in `each'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:180:in `each_strongly_connected_component'
    from /Users/liouyang/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/tsort.rb:148:in `tsort_each'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/initializable.rb:54:in `run_initializers'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/application.rb:215:in `initialize!'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/railtie/configurable.rb:30:in `method_missing'
    from /Users/liouyang/Development/code/Walker/goatee/config/environment.rb:5:in `<top (required)>'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `require'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `block in require'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:213:in `load_dependency'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `require'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/application.rb:189:in `require_environment!'
    from /Users/liouyang/.rvm/gems/ruby-1.9.3-p194/gems/railties-4.0.0/lib/rails/commands.rb:63:in `<top (required)>'
    from script/rails:6:in `require'
    from script/rails:6:in `<main>'

How to update subscriber, its working fine for adding new subscriber

I am using below code to add new subscriber to MailChimp but its not working for updating scriber..

can anyone help me how to update existing subscriber to mailchimp?

using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using PerceptiveMCAPI.Types;
using PerceptiveMCAPI;
using PerceptiveMCAPI.Methods;
using System.Web.UI.MobileControls;
namespace FilmAppWeb.Mailchip
{
public class MailChip
{
public void AddMailChip(String first_name, String last_name, String email)
{
List lstsub = new List();
Subscriber scb = new Subscriber();

    scb.email = email;
    scb.first_name = first_name;
    scb.last_name = last_name;

    lstsub.Add(scb);
    listBatchSubscribe_method(lstsub);
}

public void listBatchSubscribe_method(List<Subscriber> SubscriberList)
{
    listBatchSubscribeInput input = new listBatchSubscribeInput();
    // any directive overrides
    input.api_Validate = true;
    input.api_AccessType = EnumValues.AccessType.Serial;
    input.api_OutputType = EnumValues.OutputType.JSON;
    // method parameters
    input.parms.apikey = MCAPISettings.default_apikey;
    input.parms.id = System.Configuration.ConfigurationManager.AppSettings["ListID"];
    input.parms.double_optin = false;
    input.parms.replace_interests = true;
    input.parms.update_existing = true;
    //

    List<Dictionary<string, object>> batch =
    new List<Dictionary<string, object>>();
    foreach (Subscriber sub_rec in SubscriberList)
    {
        Dictionary<string, object> entry = new Dictionary<string, object>();
        entry.Add("EMAIL", sub_rec.email);
        // entry.Add("EMAIL_TYPE", sub_rec.email_type);
        entry.Add("FNAME", sub_rec.first_name);
        entry.Add("LNAME", sub_rec.last_name);
        //DateTime next_payment = sub_rec.last_payment.AddMonths(1);
        //entry.Add("NEXTPAY", next_payment);
        batch.Add(entry);
    }
    input.parms.batch = batch;
    // execution
    listBatchSubscribe cmd = new listBatchSubscribe(input);
    listBatchSubscribeOutput output = cmd.Execute();
    // output, format with user control
    if (output.api_ErrorMessages.Count > 0)
    {
        //showResults(output.api_Request, output.api_Response, // raw data
        //output.api_ErrorMessages, output.api_ValidatorMessages); // & errors

        //string apikey = System.Configuration.ConfigurationManager.AppSettings["mailchimpapikey"];
        //string listId = System.Configuration.ConfigurationManager.AppSettings["ListID"];

        //var inputs = new listInterestGroupingsInput(apikey, listId);
        //var lig = new listInterestGroupings(inputs);
        //var success = lig.Execute(inputs);
    }
    else
    {
        //show_listBatch1.Display(output);
        //campaignFoldersInput inputs = new campaignFoldersInput("459dad38ff06152f5eba1c4c7b3776b4-us3");
        //inputs.api_Validate = true;
        //inputs.api_AccessType = EnumValues.AccessType.Serial;
        //inputs.api_OutputType = EnumValues.OutputType.JSON;
        //// method parameters
        //inputs.parms.apikey = MCAPISettings.default_apikey;
        //inputs.parms.apikey = "459dad38ff06152f5eba1c4c7b3776b4-us3";

        //campaignFolders folders = new campaignFolders(inputs);
        //campaignFoldersOutput outputs = folders.Execute();
    }
}
public class Subscriber
{

    public object first_name;
    public object last_name;
    public object email_type;
    public DateTime last_payment;
    public object email { get; set; }

}

}

Gibbon does not speak Ruby

g = Gibbon::API.new(MAILCHIMP_API_KEY)
#=> #<Gibbon::API:0x00000007ad89d0 @api_key="KEY", @api_endpoint=nil, @timeout=nil, @throws_exceptions=nil, @default_params={:apikey=>"KEY"}>

g.templates
#=> #<Gibbon::APICategory:0x00000007100cc8 @category_name="templates", @api_key="KEY", @api_endpoint=nil, @default_params={:apikey=>"KEY"}, @throws_exceptions=true, @timeout=30>

g.respond_to?(:templates)
#=> false

g.methods.include?(:templates)
#=> false

I believe that g.respond_to?(:templates) should return true. Maybe via g.respond_to_missing?(:templates) ? What do you think?

Psych::SyntaxError: couldn't parse YAML

Ruby 1.9.2-p180, Rails 3.1.0.rc4.

The following error occurs for API call I've tried.

> mc = Gibbon::API.new("MY_API_KEY")
 => #<Gibbon::API:0x000001033822d8 @apikey="MY_API_KEY", @default_params={:apikey=>"MY_API_KEY"}> 
ruby-1.9.2-p180 :012 > mc.campaigns
Psych::SyntaxError: couldn't parse YAML at line 1 column 218
    from /Users/jonmccartie/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/1.9.1/psych.rb:148:in `parse'
    from /Users/jonmccartie/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/1.9.1/psych.rb:148:in `parse_stream'
    from /Users/jonmccartie/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/1.9.1/psych.rb:119:in `parse'
    from /Users/jonmccartie/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/1.9.1/psych.rb:106:in `load'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/crack-0.1.8/lib/crack/json.rb:12:in `parse'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/parser.rb:116:in `json'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/parser.rb:136:in `parse_supported_format'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/parser.rb:103:in `parse'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/parser.rb:66:in `call'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/request.rb:217:in `parse_response'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/request.rb:189:in `handle_response'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty/request.rb:71:in `perform'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty.rb:390:in `perform_request'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/httparty-0.7.8/lib/httparty.rb:358:in `post'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/gibbon-0.1.6/lib/gibbon.rb:31:in `call'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/gibbon-0.1.6/lib/gibbon.rb:46:in `method_missing'
    from (irb):12
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/railties-3.1.0.rc4/lib/rails/commands/console.rb:45:in `start'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/railties-3.1.0.rc4/lib/rails/commands/console.rb:8:in `start'
    from /Users/jonmccartie/.rvm/gems/ruby-1.9.2-p180@default/gems/railties-3.1.0.rc4/lib/rails/commands.rb:40:in `<top (required)>'
    from script/rails:6:in `require'

Issue with double_optin

Hi, I've just set up a new mailchimp account & list. Is there any reason why this api call, results in the user receiving the double optin email? Is there anything I need to do on the mailchimp webinterface?

gb.lists.subscribe({:id => 'my_list_id', :double_optin => false, :send_welcome => false, :email => {email: user.email}})

API Call (listSubscribe) with merge_vars set not working

I am doing some test API calls to my MailChimp account and I am trying to subscribe a new user to a test list and I am submitting the merge_vars in with the call, but none of the variables are getting set.

Here is my test code:

mc.listSubscribe({:id => "list_id_here", :email_address => "[email protected]", :merge_vars => ["FNAME" => "Chimpy", "LNAME" => "Chimperson"], :double_optin => false})

OpenSSL::SSL::SSLError problem

2.1.1 :007 > gb.lists.list
OpenSSL::SSL::SSLError: hostname "api.mailchimp.com" does not match the server certificate
    from /Users/mmahalwy/.rvm/rubies/ruby-2.1.1/lib/ruby/2.1.0/openssl/ssl.rb:139:in `post_connection_check'
    from /Users/mmahalwy/.rvm/rubies/ruby-2.1.1/lib/ruby/2.1.0/net/http.rb:922:in `connect'
    from /Users/mmahalwy/.rvm/rubies/ruby-2.1.1/lib/ruby/2.1.0/net/http.rb:863:in `do_start'
    from /Users/mmahalwy/.rvm/rubies/ruby-2.1.1/lib/ruby/2.1.0/net/http.rb:852:in `start'
    from /Users/mmahalwy/.rvm/rubies/ruby-2.1.1/lib/ruby/2.1.0/net/http.rb:1369:in `request'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/rack-mini-profiler-0.9.1/lib/patches/net_patches.rb:7:in `block in request_with_mini_profiler'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/rack-mini-profiler-0.9.1/lib/mini_profiler/profiling_methods.rb:40:in `step'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/rack-mini-profiler-0.9.1/lib/patches/net_patches.rb:6:in `request_with_mini_profiler'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/httparty-0.13.1/lib/httparty/request.rb:93:in `perform'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/httparty-0.13.1/lib/httparty.rb:521:in `perform_request'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/httparty-0.13.1/lib/httparty.rb:473:in `post'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/gibbon-1.1.2/lib/gibbon/api_category.rb:28:in `call'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/gibbon-1.1.2/lib/gibbon/api_category.rb:48:in `method_missing'
    from (irb):7
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/railties-4.0.4/lib/rails/commands/console.rb:90:in `start'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/railties-4.0.4/lib/rails/commands/console.rb:9:in `start'
    from /Users/mmahalwy/.rvm/gems/ruby-2.1.1/gems/railties-4.0.4/lib/rails/commands.rb:62:in `<top (required)>'
    from bin/rails:4:in `require'
    from bin/rails:4:in `<main>'2.1.1 :008 >

Setting custom timeout doesn't seem to do anything

I'm doing a batch subscribe, and the default 30s wasn't long enough. I tried setting it to 600, but it's still timing out in 30s

    gb.timeout = 600

    raise gb.timeout.inspect

The above line returns 'nil'

MailChimp API through proxy

According to the post found in their google group, the MailChimp API does not support communicating via a proxy.

I have read that there are some patches like this one, and I would like to know if it possible to implement this in Gibbon. If so, kindly point me to the "right direction", i.e. which modules and files I should look into, and then I will make a pull request, assuming you want this workaround to be part of the gem.

Thank you.

campignCreate is not exported by this server

Hi,

when i'm trying to create a campaign on our server, i'm getting this error:
result:code-90errorMethod campignCreate is not exported by this server

I tried running it locally and the code seemed to work just fine.
I'm issuing the create_campaign create from within a controller's create (POST) action, does it have something to do with that?

Any idea what's this error?

Thanks,
Roy

MailChimp API Error: You must specify a email value (code -100)

Hi, trying to subscribe an email to an existing list but failing:

Gibbon::API.lists.subscribe( { :id => 'foofoo', :email_address => '[email protected]' } )
Gibbon::MailChimpError: MailChimp API Error: You must specify a email value (code -100)

An API key has been registered and I can successfully see all my lists.
Any idea why this is happening?

Rails server or console wont start after installing gibbon

After installing the gibbon gem to my app, I get an error message while trying to start the server or the console.

[1] $ rails s                                                                                                                                                                
/Users/lurraca/.rvm/gems/[email protected]/gems/gibbon-0.4.6/lib/gibbon.rb:8:in `<class:Gibbon>': undefined method `default_timeout' for Gibbon:Class (NoMethodError)
    from /Users/lurraca/.rvm/gems/[email protected]/gems/gibbon-0.4.6/lib/gibbon.rb:5:in `<top (required)>'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler/runtime.rb:68:in `require'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler/runtime.rb:68:in `block (2 levels) in require'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler/runtime.rb:66:in `each'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler/runtime.rb:66:in `block in require'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler/runtime.rb:55:in `each'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler/runtime.rb:55:in `require'
    from /Users/lurraca/.rvm/gems/ruby-1.9.3-p194@global/gems/bundler-1.1.5/lib/bundler.rb:119:in `require'
    from /Users/lurraca/Desktop/projects/pixelpt/shop.pr-web.rails/config/application.rb:6:in `<top (required)>'
    from /Users/lurraca/.rvm/gems/[email protected]/gems/railties-3.2.11/lib/rails/commands.rb:53:in `require'
    from /Users/lurraca/.rvm/gems/[email protected]/gems/railties-3.2.11/lib/rails/commands.rb:53:in `block in <top (required)>'
    from /Users/lurraca/.rvm/gems/[email protected]/gems/railties-3.2.11/lib/rails/commands.rb:50:in `tap'
    from /Users/lurraca/.rvm/gems/[email protected]/gems/railties-    3.2.11/lib/rails/commands.rb:50:in `<top (required)>'
    from script/rails:6:in `require'
    from script/rails:6:in `<main>'

How to add a user to a specific group while subscribing to a list

I am running this on console and its adding user in my subscribed_list. Works like charm.

  gb.lists.subscribe({:id => list_id, :email => {:email => '[email protected]'}, :merge_vars => {:FNAME => 'Mohit', :LNAME => 'Jain', }, :double_optin => false})

Now I want to subscriber to groups: Like I have a group " User Type" which has some predefined 4 values. How can I map this User Type in subscribe method?

Error installing gibbon under jRuby

Hi,

trying to install the gibbon gem under jruby 1.6.1 I get the following error with a (very very long) stacktrace.

$ gem install gibbon
System.java:-2:in `arraycopy': java.lang.ArrayIndexOutOfBoundsException
  from DefaultResolver.java:111:in `makeTime'
  from DefaultResolver.java:277:in `create'
  from DefaultResolver.java:317:in `handleScalar'
  from DefaultResolver.java:435:in `orgHandler'
  from DefaultResolver.java:455:in `node_import'
  from DefaultResolver$s$1$0$node_import.gen:65535:in `call'
  from CachingCallSite.java:137:in `call'
  from RubyLoadHandler.java:40:in `handle'
  from Parser.java:300:in `addNode'
  from DefaultYAMLParser.java:676:in `yyparse'
  from Parser.java:290:in `yechtparse'
  from Parser.java:284:in `parse'
  from YParser.java:152:in `load'
  from YParser$s$0$1$load.gen:65535:in `call'
  from JavaMethod.java:630:in `call'
  from DynamicMethod.java:205:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from CallOneArgNode.java:57:in `interpret'
  from LocalAsgnNode.java:123:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from CallOneArgNode.java:57:in `interpret'
  from LocalAsgnNode.java:123:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from CallOneArgNode.java:57:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from RescueNode.java:216:in `executeBody'
  from RescueNode.java:120:in `interpretWithJavaExceptions'
  from RescueNode.java:110:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from FCallOneArgNode.java:36:in `interpret'
  from InstAsgnNode.java:95:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from EnsureNode.java:96:in `interpret'
  from BeginNode.java:83:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from WhenOneArgNode.java:36:in `whenSlowTest'
  from WhenOneArgNode.java:46:in `when'
  from CaseNode.java:133:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from ASTInterpreter.java:111:in `INTERPRET_BLOCK'
  from InterpretedBlock.java:374:in `evalBlockBody'
  from InterpretedBlock.java:347:in `yield'
  from InterpretedBlock.java:304:in `yield'
  from Block.java:130:in `yield'
  from YieldNode.java:112:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:111:in `INTERPRET_BLOCK'
  from InterpretedBlock.java:374:in `evalBlockBody'
  from InterpretedBlock.java:295:in `yield'
  from InterpretedBlock.java:229:in `yieldSpecific'
  from Block.java:99:in `yieldSpecific'
  from RubyKernel.java:1418:in `loop'
  from RubyKernel$s$0$0$loop.gen:65535:in `call'
  from CachingCallSite.java:272:in `cacheAndCall'
  from CachingCallSite.java:114:in `callBlock'
  from CachingCallSite.java:123:in `callIter'
  from FCallNoArgBlockNode.java:32:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:169:in `call'
  from DefaultMethod.java:171:in `call'
  from CachingCallSite.java:272:in `cacheAndCall'
  from CachingCallSite.java:114:in `callBlock'
  from CachingCallSite.java:123:in `callIter'
  from CallNoArgBlockNode.java:64:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:255:in `call'
  from DefaultMethod.java:203:in `call'
  from CachingCallSite.java:312:in `cacheAndCall'
  from CachingCallSite.java:182:in `callBlock'
  from CachingCallSite.java:186:in `call'
  from RubyClass.java:806:in `newInstance'
  from RubyClass$i$newInstance.gen:65535:in `call'
  from JavaMethod.java:283:in `call'
  from WrapperMethod.java:62:in `call'
  from CachingCallSite.java:302:in `cacheAndCall'
  from CachingCallSite.java:173:in `call'
  from FCallTwoArgNode.java:38:in `interpret'
  from LocalAsgnNode.java:123:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from EnsureNode.java:96:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:255:in `call'
  from DefaultMethod.java:203:in `call'
  from CachingCallSite.java:312:in `cacheAndCall'
  from CachingCallSite.java:182:in `callBlock'
  from CachingCallSite.java:186:in `call'
  from CallTwoArgBlockPassNode.java:62:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:298:in `call'
  from DefaultMethod.java:219:in `call'
  from CachingCallSite.java:332:in `cacheAndCall'
  from CachingCallSite.java:216:in `callBlock'
  from CachingCallSite.java:225:in `callIter'
  from CallThreeArgBlockNode.java:64:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:276:in `call'
  from DefaultMethod.java:211:in `call'
  from CachingCallSite.java:322:in `cacheAndCall'
  from CachingCallSite.java:207:in `call'
  from FCallThreeArgNode.java:40:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from ASTInterpreter.java:111:in `INTERPRET_BLOCK'
  from InterpretedBlock.java:374:in `evalBlockBody'
  from InterpretedBlock.java:347:in `yield'
  from InterpretedBlock.java:304:in `yield'
  from Block.java:130:in `yield'
  from RubyIO.java:1121:in `open'
  from RubyKernel.java:298:in `open'
  from RubyKernel$s$0$2$open.gen:65535:in `call'
  from DynamicMethod.java:217:in `call'
  from CachingCallSite.java:312:in `cacheAndCall'
  from CachingCallSite.java:182:in `callBlock'
  from CachingCallSite.java:191:in `callIter'
  from FCallTwoArgBlockNode.java:34:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from RescueNode.java:216:in `executeBody'
  from RescueNode.java:120:in `interpretWithJavaExceptions'
  from RescueNode.java:110:in `interpret'
  from BeginNode.java:83:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from IfNode.java:119:in `interpret'
  from IfNode.java:119:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:233:in `call'
  from DefaultMethod.java:195:in `call'
  from CachingCallSite.java:302:in `cacheAndCall'
  from CachingCallSite.java:173:in `call'
  from CallTwoArgNode.java:59:in `interpret'
  from InstAsgnNode.java:95:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from RescueNode.java:216:in `executeBody'
  from RescueNode.java:120:in `interpretWithJavaExceptions'
  from RescueNode.java:110:in `interpret'
  from BeginNode.java:83:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:147:in `call'
  from DefaultMethod.java:163:in `call'
  from CachingCallSite.java:262:in `cacheAndCall'
  from CachingCallSite.java:105:in `call'
  from VCallNode.java:85:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:255:in `call'
  from DefaultMethod.java:203:in `call'
  from CachingCallSite.java:312:in `cacheAndCall'
  from CachingCallSite.java:182:in `callBlock'
  from CachingCallSite.java:186:in `call'
  from RubyClass.java:806:in `newInstance'
  from RubyClass$i$newInstance.gen:65535:in `call'
  from JavaMethod.java:283:in `call'
  from CachingCallSite.java:302:in `cacheAndCall'
  from CachingCallSite.java:173:in `call'
  from CallTwoArgNode.java:59:in `interpret'
  from DAsgnNode.java:110:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:111:in `INTERPRET_BLOCK'
  from InterpretedBlock.java:374:in `evalBlockBody'
  from InterpretedBlock.java:347:in `yield'
  from InterpretedBlock.java:304:in `yield'
  from Block.java:130:in `yield'
  from RubyArray.java:1595:in `eachCommon'
  from RubyArray.java:1602:in `each'
  from RubyArray$i$0$0$each.gen:65535:in `call'
  from CachingCallSite.java:272:in `cacheAndCall'
  from CachingCallSite.java:114:in `callBlock'
  from CachingCallSite.java:123:in `callIter'
  from CallNoArgBlockNode.java:64:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:233:in `call'
  from DefaultMethod.java:195:in `call'
  from CachingCallSite.java:302:in `cacheAndCall'
  from CachingCallSite.java:173:in `call'
  from CallTwoArgNode.java:59:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from RescueNode.java:216:in `executeBody'
  from RescueNode.java:120:in `interpretWithJavaExceptions'
  from RescueNode.java:110:in `interpret'
  from BeginNode.java:83:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from ASTInterpreter.java:111:in `INTERPRET_BLOCK'
  from InterpretedBlock.java:374:in `evalBlockBody'
  from InterpretedBlock.java:347:in `yield'
  from InterpretedBlock.java:304:in `yield'
  from Block.java:130:in `yield'
  from RubyArray.java:1595:in `eachCommon'
  from RubyArray.java:1602:in `each'
  from RubyArray$i$0$0$each.gen:65535:in `call'
  from CachingCallSite.java:272:in `cacheAndCall'
  from CachingCallSite.java:114:in `callBlock'
  from CachingCallSite.java:123:in `callIter'
  from CallNoArgBlockNode.java:64:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:147:in `call'
  from DefaultMethod.java:163:in `call'
  from CachingCallSite.java:262:in `cacheAndCall'
  from CachingCallSite.java:105:in `call'
  from VCallNode.java:85:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from IfNode.java:119:in `interpret'
  from IfNode.java:119:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from CallSpecialArgNode.java:67:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from CaseNode.java:138:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from FCallOneArgNode.java:36:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from RescueNode.java:216:in `executeBody'
  from RescueNode.java:120:in `interpretWithJavaExceptions'
  from RescueNode.java:110:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from CallOneArgNode.java:57:in `interpret'
  from NewlineNode.java:103:in `interpret'
  from BlockNode.java:71:in `interpret'
  from ASTInterpreter.java:74:in `INTERPRET_METHOD'
  from InterpretedMethod.java:190:in `call'
  from DefaultMethod.java:179:in `call'
  from CachingCallSite.java:282:in `cacheAndCall'
  from CachingCallSite.java:139:in `call'
  from /Users/einar/.rvm/rubies/jruby-1.6.1/bin/gem:25:in `chained_0_rescue_1$RUBY$SYNTHETIC__file__'
  from /Users/einar/.rvm/rubies/jruby-1.6.1/bin/gem:24:in `__file__'
  from /Users/einar/.rvm/rubies/jruby-1.6.1/bin/gem:-1:in `load'
  from Ruby.java:671:in `runScript'
  from Ruby.java:575:in `runNormally'
  from Ruby.java:424:in `runFromMain'
  from Main.java:278:in `doRunFromMain'
  from Main.java:198:in `internalRun'
  from Main.java:164:in `run'
  from Main.java:148:in `run'
  from Main.java:128:in `main'

Handle non-JSON response from Mailchimp

Sometimes mailchimp returns non-JSON response like

<HTML><HEAD><TITLE>Error</TITLE></HEAD><BODY> An error occurred while processing your request.<p> Reference&#32;&#35;97&#46;200fd717&#46;1399515926&#46;55f85ee </BODY></HTML>

on API call to lists.subscribe().

That results in MultiJson::ParseError on call to MultiJson.load() https://github.com/amro/gibbon/blob/master/lib/gibbon/api_category.rb#L33

Open SSL error

I've seen your latest commit seems to be about this problem's correction;
bu I keep having the following :

OpenSSL::SSL::SSLError: hostname "api.mailchimp.com" does not match the server certificate

Randomly *

This link (http://stackoverflow.com/questions/21792418/mail-chimp-rails-gibbon-gem-hostname-does-not-match-the-server-certificate) quite explains it well, but it does not change anything

Thanks if you have any clues about this problem

Unsubscribe example

Minor, but it'd be useful to see an example in the readme of unsubscribing a single user with the gem. I couldn't find that listed anywhere but dug into the mailchimp API and took a flier and it worked. Let the people know it can be done! :)

(this is from within the User.rb model in a before_destroy callback, hence the "self")

def unsubscribe
mailchimp = Gibbon::API.new
result = mailchimp.lists.unsubscribe({
:id => ENV["MAILCHIMP_LIST_ID"],
:email => {:email => self.email},
:delete_member => true, # this is NOT the default value
:send_notify => true,
:send_goodbye => true
})
Rails.logger.info("Unsubscribed #{self.email} from MailChimp") if result
end

Unknown method "list_interest_groupings/first"

I have initialize my mailchimp object but when i try to get grouping_id igot following error
(rdb:34) mc.grouping_id
*** Gibbon::MailChimpError Exception: MailChimp API Error: Unknown method "list_interest_groupings/first" (code -32601)

Documentation unclear about how to use 'start' and 'limit' options with 'lists.members' call

... and probably other calls that require they be passed in an 'opts' hash.

For example, I want to paginate through a list of 37,000 user accounts (the Export API does not return the rich data I want, for example, the subscription status 'unsubscribed' or 'subscribed') ...

I saw in the Mailchimp documentation that this is possible:
http://apidocs.mailchimp.com/api/2.0/lists/members.php

So, I tried passing 'start' and 'limit' settings like so (this is how you have documented it for listing campaigns and such):

lists.members({:id => MAILCHIMP_LIST_ID, :start => 0, :limit => 1})

... but that doesn't work. Eventually (30m later) I realized I needed to do it like so:

lists.members({:id => MAILCHIMP_LIST_ID, :opts => {:start => 0, :limit => 1}})

Could be helpful to make a note of that in the documentation, or at least, this issue will help others who search for it.

Thanks!
Kevin Trowbridge

After creating a campaign I can't schedule it

I create a campaign using campaign_create function and I store the result in campaign_id variable:

campaign_id = mailchimp.campaign_create(
    :type => 'regular',
    :options => {
      :subject => "xxxxx",
      :list_id => list["id"],
      :from_email => 'xxxxx',
      :from_name => 'xxxxx',
      :template_id => 'xxxxx'
    },
    :content => {
      'html_main' => 'xxxxx'
    }
)

After that, I want to schedule the campaign using campaign_schedule function but it returns an error:

mailchimp.campaign_schedule(
  :cid => campaign_id,
  :schedule_time => (Date.today+3.days).to_s(:db) 
)
=> {"error"=>"Invalid Campaign ID: \"308ce5e39d\"", "code"=>300}

I have checked if campaign with that id exists and it seems to be ok. Any ideas?

Thank you.

Gibbon Does Not Return Error Message (Error Handling)

When using rescue Gibbon::MailChimpError I am putting the Gibbon::API.errors in a flash.now, instead of getting "some text explaining the error" I get something like: "#Gibbon::APICategory:0x00000001cc60b8"

If I don't have the rescue block in and I submit params that raise an error (e.g. an email that is already subscribed to the list) I get "MailChimp API Error: {submitted email} is already subscribed to {list}. Click here to update your profile. (code 214)" from action controller.

I would expect Gibbon::API.errors to return this message as this is what the Gibbon documentation for error handling states?

I'm sure I'm doing something wrong as I get the API error that I would expect from Mailchimp without having the rescue block in, I guess it is just unclear to me as to where I can pull error messages out through Gibbon?

JSON Parse Error

I just recently upgraded to Rails 3.1 and in the process I caught an issue with the list_subscribe method, it was a JSON parse error as shown here: https://gist.github.com/1680053

I downgraded gibbon back to 0.3.1 and everything ran fine.

Global variables in initializer for Rails

I have an initializer titled mailchimp.rb in my /lib directory with the following:

Gibbon::API.api_key = "API_KEY_HERE"

In console if i run Gibbon::API.new the api_key is not set. Any reason why this wouldn't work?

Update users groups

So I have four groups for MailChimp users:

[
{"name"=>"Free Customers", "interested"=>true},
{"name"=>"Subscribers", "interested"=>false},
{"name"=>"Paying Customers", "interested"=>false},
{"name"=>"Test", "interested"=>true}
]
I have a quick question, at the time when I subscribe a user to MailChimp list, I definetely should have an option to add a user to one or the other group. And then I would like to change based on the user status (either the user is Free or Paid). There is even an API call for this purpose: http://apidocs.mailchimp.com/api/2.0/lists/update-member.php

However it is a bit confusing what sort of merge variables should I put for the group update. As the group change sits really deep...

info["data"].first["merges"]["GROUPINGS"].first["groups"]
Could you please tell me how to change a group of interest of users?

I'm using

Rails 4.0.0
Ruby 2
Gibbon 1.1
MailChimp v2

csv parser doesnt understand quoted fields

Timestamp columns are quoted with comma in them, system where the files comes from doesn't allow changing delimiter.

ERROR: extra data after last expected column
CONTEXT: COPY five9_contacts, line 2: "1,"Tue, 6 Nov 2012 12:31:29","Thu, 6 Dec 2012 17:27:50",0,Gabby Balajadia,9252988468,,,Gabby,Balajad..."

edit/update email

Can the mailchimp api call (.listupdatemember) be used? I am having problems using this call

I appreciate any help...Thanks!

How to update list subscriber, its working fine for adding new subscriber

I am using below code to add new scriber to mailchimp but its not working for updating scriber..

can anyone help me how to update existing subscriber to mailchimp?

        scb.email = email;
        scb.first_name = first_name;
        scb.last_name = last_name;

        lstsub.Add(scb);
        listBatchSubscribe_method(lstsub);
    }

    public void listBatchSubscribe_method(List<Subscriber> SubscriberList)
    {
        listBatchSubscribeInput input = new listBatchSubscribeInput();
        // any directive overrides
        input.api_Validate = true;
        input.api_AccessType = EnumValues.AccessType.Serial;
        input.api_OutputType = EnumValues.OutputType.JSON;
        // method parameters
        input.parms.apikey = MCAPISettings.default_apikey;
        input.parms.id = System.Configuration.ConfigurationManager.AppSettings["ListID"];
        input.parms.double_optin = false;
        input.parms.replace_interests = true;
        input.parms.update_existing = false;
        //

        List<Dictionary<string, object>> batch =
        new List<Dictionary<string, object>>();
        foreach (Subscriber sub_rec in SubscriberList)
        {
            Dictionary<string, object> entry = new Dictionary<string, object>();
            entry.Add("EMAIL", sub_rec.email);
            // entry.Add("EMAIL_TYPE", sub_rec.email_type);
            entry.Add("FNAME", sub_rec.first_name);
            entry.Add("LNAME", sub_rec.last_name);
            //DateTime next_payment = sub_rec.last_payment.AddMonths(1);
            //entry.Add("NEXTPAY", next_payment);
            batch.Add(entry);
        }
        input.parms.batch = batch;
        // execution
        listBatchSubscribe cmd = new listBatchSubscribe(input);
        listBatchSubscribeOutput output = cmd.Execute();
        // output, format with user control
        if (output.api_ErrorMessages.Count > 0)
        {
            //showResults(output.api_Request, output.api_Response, // raw data
            //output.api_ErrorMessages, output.api_ValidatorMessages); // & errors

            //string apikey = System.Configuration.ConfigurationManager.AppSettings["mailchimpapikey"];
            //string listId = System.Configuration.ConfigurationManager.AppSettings["ListID"];

            //var inputs = new listInterestGroupingsInput(apikey, listId);
            //var lig = new listInterestGroupings(inputs);
            //var success = lig.Execute(inputs);
        }
        else
        {
            //show_listBatch1.Display(output);
            //campaignFoldersInput inputs = new campaignFoldersInput("459dad38ff06152f5eba1c4c7b3776b4-us3");
            //inputs.api_Validate = true;
            //inputs.api_AccessType = EnumValues.AccessType.Serial;
            //inputs.api_OutputType = EnumValues.OutputType.JSON;
            //// method parameters
            //inputs.parms.apikey = MCAPISettings.default_apikey;
            //inputs.parms.apikey = "459dad38ff06152f5eba1c4c7b3776b4-us3";

            //campaignFolders folders = new campaignFolders(inputs);
            //campaignFoldersOutput outputs = folders.Execute();
        }
    }
    public class Subscriber
    {

        public object first_name;
        public object last_name;
        public object email_type;
        public DateTime last_payment;
        public object email { get; set; }

    }
}

}

Requests hanging in Rails?

I am attempting to add some Mailchimp integration to a Rails app. However, all of the requests I make inside of Rails hang indefinitely.

I made the same call (directly from the docs) gb.campaigns.list({:start => 0, :limit => 100}) which works in irb but does not work inside of Rails. I am using the same code in both to make the calls, and I also ensured that API keys are set correctly.

Any ideas why it might not work inside of Rails?

Add subscribe to lists

Hi,

I'm trying

list = gb.listSubscribe({:id => 'b2c5557688', :email_address => '[email protected]'})

that line reurns true, but is not added to the list, Is something wrong ? or how I can add subscribes to my lists ?

Thanks, regards

It's works only on Rails3 ??

Subscribes to wrong list

Here is the code for subscribing a new user to a list.
I am using the direct list id that mailchimp provides in my list settings. However, for some reason it subcribes to the wrong list.

Any ideas of why this is occuring?

gb = Gibbon.new

gb.list_subscribe(:id => "***********", :email_address => @user.email, :merge_vars => {'fname' => @user.first_name, 'lname' => @user.last_name }, :email_type => "html", :double_optin => false, :send_welcome => false)

Thanks!

Support for Mailchimp groups within lists

Is this supported with Gibbon, and if so how?

I need to sign some people up to a specific group.

Thanks for your help last time,

Kasper 👍

:throws_exeptions => false initializer option isn't stored

Because of the way that the :throws_exceptions option is pulled out the initializer arguments, when it's set to false, it's not correctly being stored and passed along to the APICategory.

Install broken because of ruby version required by httparty

Hello,

My install just broke because my project is using Ruby 1.9.2 and the last HTTParty requires Ruby version 1.9.3

Not sure how you want to fix this, but I guess the gemspec of Gibbon should either specify the same Ruby version, or specify a HTTParty version prior to this change (like 0.11.0).

This is what I did to deal with the problem:
Instead of letting Bundler deal with this particular dependency, I did gem install httparty -v '0.11.0' and then gem install gibbon.

mig

lists/list returns all lists if :list_id is invalid

When querying for a specific list using :list_id it returns all lists if the list_id does not match anything. It should return an empty set.

Raise error if batch command partially failed

Operations such as lists.batch_subscribe return errors in an errors array, rather than a single error value that the response handler expects. At the moment if an error occurs during that operation gibbon silently returns.

As we can't raise individual errors for each error in the array we have two choices:

Raise a Gibbon::MailChimpError for the first error in the array
Introduce a new Gibbon::MultipleMailChimpErrors to encapsulate all of the errors

Thoughts?

Some responses not decoded correctly

campaign_create is meant to return the campaign_id but it is returned without decoding i.e. surrounded by quotation marks

campaign_send is meant to return a boolean, but instead returns a string (true/false)

using ActiveSupport::JSON.decode instead of JSON.parse appears to resolve this.

undefined method `ssl_implied?' for HttpParty Request

I think lastest httparty gem get some udpates that broke current gibbon version ?

Could you tell me what is the correct httparty version you are using.

This is extracted from my Gemfile.lock :

gibbon (0.3.5)
httparty (> 0.6.0)
httparty (> 0.6.0)
json (> 1.4.0)
json (> 1.4.0)
rdoc

[...]

httparty (0.9.0)
multi_json (~> 1.0)
multi_xml

Unable to unset once set merge variable

I have an integer merge variable that using the Mailchimp website I can unset by clearing the field. However, calling .lists.batch_subscribe with update_existing: true and merge_vars: { test_var: nil } does not unset test_var, it just leaves the existing value in there.

Performing the same query with :test_var set to a non nil value works fine.

(Apologies if this is not a gibbon issue but an API one, but theres no support links in the README!)

amro / gibbon Goto Github PK

gibbon's People

Contributors

Stargazers

Watchers

Forkers

gibbon's Issues

Recommend Projects

Recommend Topics

Recommend Org

Jobs