anaelorlinski / openwrt-nanopi-r5s-builds

OpenWRT Builds for NanoPi R5S from official Openwrt source code with minimal set of patches

OpenWrt Builds for NanoPi R5S

Automated builds of OpenWrt for FriendlyARM NanoPi R5S boards

If you like this project you can gift me a coffee !

OpenWrt 23.05

Download 23.05 Releases Changelog Supported Models : R5S

⚠ Warning: No support / Use at your own risk ⚠

License

MIT

openwrt-nanopi-r5s-builds's Issues

How to resize root fs?

I have installed the latest build of OpenWrt from here on the internal eMMC of a R5S via upload in FriendlyWrt web-interface. For now the system boots up and seems to work fine - thank you!
Unfortunately it is using just 1G of the eMMC:

root@OpenWrt:~# fdisk /dev/mmcblk1
...
Disk /dev/mmcblk1: 28.91 GiB, 31037849600 bytes, 60620800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 * 65536 147455 81920 40M 83 Linux
/dev/mmcblk1p2 196608 2293759 2097152 1G 83 Linux

root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 88.3M 88.3M 0 100% /rom
tmpfs 1.8G 936.0K 1.8G 0% /tmp
/dev/loop0 933.9M 72.8M 861.1M 8% /overlay
overlayfs:/overlay 933.9M 72.8M 861.1M 8% /
tmpfs 512.0K 0 512.0K 0% /dev
cgroup 1.8G 0 1.8G 0% /sys/fs/cgroup
overlayfs:/overlay 933.9M 72.8M 861.1M 8% /opt/docker

How can I expand the filesystem to use the whole 32G? I found a howto (https://openwrt.org/docs/guide-user/advanced/expand_root) but I get no errors and it seems not to do anything. What do I miss?

Thanks in advance.

Data being sent to openwrt.ai

I just set up a forward DNS on my OpenWRT r5s (using your latest build) and noticed a lot of calls out to openwrt.ai

Do you know what these lookups might be for?

NanoPi R5C

Would this build work with NanoPi R5C as well?

NanoPi R5S now supported in OpenWRT

It looks like support for NanoPi R5S finally got merged and SNAPSHOT builds are now available. Until the official builds are known to be stable it certainly makes sense to maintain this repo but once we're sure the official builds are stable does maintaining the repo make sense?

https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=rockchip%2Farmv8&id=friendlyarm_nanopi-r5s

M2 Wifi support?

Hi there,
I'm just wondering about using this with M2 wifi cards such as those listed on the friendly elec wiki for the R5C, and whether this image works with the R5C?
https://wiki.friendlyelec.com/wiki/images/4/4d/R2swrt%2Busbwifi-20210831.jpg

No HDMI support

Very nice, thanks for putting this together!
Seems the current version does not include support for HDMI output, which would be really convenient to see what is happening without having to connect a serial probe. I tried installing the panfrost kernel module but it fails due to a kernel version mismatch. Any idea how to bypass that? Thanks!

发几张图，写点特性，谢谢

如题

Moving from SD Card into the eMMC?

Is it possible to move OpenWRT from the SD Card into the eMMC?
If so, how?

NVME M.2 2280 SSD Not Detected

I put in a 2TB M.2 NVME card and it isn't detected and doesn't appear in /dev/. Are NVME drives supported?

Here's my dmsg:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 5.15.134 (ao@openwrt) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23497-6637af95aa) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP PREEMPT Mon Oct 9 21:45:35 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R5S
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] cma: Reserved 16 MiB at 0x00000000ee800000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s36312 r8192 d29224 u73728
[ 0.000000] pcpu-alloc: s36312 r8192 d29224 u73728 alloc=184096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176
[ 0.000000] Kernel command line: console=ttyS2,1500000 console=tty1 earlycon=uart8250,mmio32,0xfe660000 swiotlb=1 root=PARTUUID=5452574f-02 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3819968K/3930112K available (9728K kernel code, 2430K rwdata, 2900K rodata, 1792K init, 774K bss, 93760K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 320 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @440000 (indirect, esz 8, psz 64K, shr 0)
[ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @450000 (flat, esz 2, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000000460000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000470000
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001541] Console: colour dummy device 80x25
[ 0.001995] printk: console [tty1] enabled
[ 0.002448] printk: bootconsole [uart8250] disabled
[ 0.002986] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.003020] pid_max: default: 32768 minimum: 301
[ 0.003585] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003638] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.006604] rcu: Hierarchical SRCU implementation.
[ 0.006959] Platform MSI: interrupt-controller@fd440000 domain created
[ 0.007287] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[ 0.007903] smp: Bringing up secondary CPUs ...
[ 0.008691] Detected VIPT I-cache on CPU1
[ 0.008741] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 0.008768] GICv3: CPU1: using allocated LPI pending table @0x0000000000480000
[ 0.008830] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.009686] Detected VIPT I-cache on CPU2
[ 0.009731] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 0.009756] GICv3: CPU2: using allocated LPI pending table @0x0000000000490000
[ 0.009805] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.010697] Detected VIPT I-cache on CPU3
[ 0.010740] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 0.010762] GICv3: CPU3: using allocated LPI pending table @0x00000000004a0000
[ 0.010806] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.010929] smp: Brought up 1 node, 4 CPUs
[ 0.011079] SMP: Total of 4 processors activated.
[ 0.011097] CPU features: detected: 32-bit EL0 Support
[ 0.011112] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.011133] CPU features: detected: Common not Private translations
[ 0.011148] CPU features: detected: CRC32 instructions
[ 0.011163] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.011178] CPU features: detected: Privileged Access Never
[ 0.011191] CPU features: detected: RAS Extension Support
[ 0.011209] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.011577] CPU: All CPU(s) started at EL2
[ 0.026719] KASLR disabled due to lack of seed
[ 0.026921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026969] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.027747] pinctrl core: initialized pinctrl subsystem
[ 0.029461] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.031637] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.032213] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.033012] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.035043] thermal_sys: Registered thermal governor 'step_wise'
[ 0.035055] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.035638] cpuidle: using governor menu
[ 0.035801] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.035975] ASID allocator initialised with 65536 entries
[ 0.036119] Serial: AMBA PL011 UART driver
[ 0.062407] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[ 0.063055] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[ 0.063696] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[ 0.064281] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[ 0.064826] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[ 0.081412] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.081460] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.081480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.081501] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.083835] cryptd: max_cpu_qlen set to 1000
[ 0.087184] fbcon: Taking over console
[ 0.088018] vcc3v3_sys: supplied by vdd_usbc
[ 0.088593] vcc5v0_sys: supplied by vdd_usbc
[ 0.089302] vcc3v3_pcie: supplied by vcc5v0_sys
[ 0.089655] vcc5v0_usb: supplied by vdd_usbc
[ 0.090212] vcc5v0_usb_host: supplied by vcc5v0_usb
[ 0.090976] vcc5v0_usb_otg: supplied by vcc5v0_usb
[ 0.091345] pcie30_avdd0v9: supplied by vcc3v3_sys
[ 0.091744] pcie30_avdd1v8: supplied by vcc3v3_sys
[ 0.092365] iommu: Default domain type: Translated
[ 0.092390] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.093615] SCSI subsystem initialized
[ 0.093872] usbcore: registered new interface driver usbfs
[ 0.093940] usbcore: registered new interface driver hub
[ 0.094036] usbcore: registered new device driver usb
[ 0.094307] pps_core: LinuxPPS API ver. 1 registered
[ 0.094328] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.094366] PTP clock support registered
[ 0.095112] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 0.095210] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 0.097247] clocksource: Switched to clocksource arch_sys_counter
[ 0.097626] VFS: Disk quotas dquot_6.6.0
[ 0.097750] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.103238] NET: Registered PF_INET protocol family
[ 0.103569] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.106538] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.106634] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.106669] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.106951] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.107456] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.107654] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.107769] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.108144] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.108228] PCI: CLS 0 bytes, default 64
[ 0.109432] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[ 0.116002] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.124651] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.124695] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.178461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.178679] io scheduler mq-deadline registered
[ 0.189731] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
[ 0.189811] rockchip-dw-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[ 0.189860] rockchip-dw-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000
[ 0.189897] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0040000000
[ 0.190042] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled
[ 0.190068] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 0.397264] rockchip-dw-pcie 3c0000000.pcie: Link up
[ 0.397415] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
[ 0.397443] pci_bus 0000:00: root bus resource [bus 00-0f]
[ 0.397469] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
[ 0.397496] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff]
[ 0.397519] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.397583] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
[ 0.397633] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 0.397724] pci 0000:00:00.0: supports D1 D2
[ 0.397745] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.402707] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
[ 0.402911] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000
[ 0.403013] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 0.403036] pci 0000:01:00.0: reg 0x10: [io size 0x0100]
[ 0.403140] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 0.403216] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 0.403745] pci 0000:01:00.0: supports D1 D2
[ 0.403768] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.417552] pci 0000:00:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
[ 0.417595] pci 0000:00:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
[ 0.417627] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.417657] pci 0000:01:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
[ 0.417730] pci 0000:01:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
[ 0.417800] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 0.417838] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.417860] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 0.417881] pci 0000:00:00.0: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.418028] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
[ 0.421134] pcieport 0000:00:00.0: PME: Signaling with IRQ 66
[ 0.421660] pcieport 0000:00:00.0: AER: enabled with IRQ 75
[ 0.629464] phy phy-fe8c0000.phy.7: lane number 0, val 1
[ 0.629499] phy phy-fe8c0000.phy.7: lane number 1, val 2
[ 0.629520] phy phy-fe8c0000.phy.7: bifurcation enabled
[ 0.645430] phy phy-fe8c0000.phy.7: p3phy (fw-d54d0eb) initialized
[ 0.645580] rockchip-dw-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges:
[ 0.645644] rockchip-dw-pcie 3c0400000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[ 0.645691] rockchip-dw-pcie 3c0400000.pcie: MEM 0x00f2200000..0x00f3ffffff -> 0x00f2200000
[ 0.645729] rockchip-dw-pcie 3c0400000.pcie: MEM 0x0340000000..0x037fffffff -> 0x0040000000
[ 0.659085] rockchip-dw-pcie 3c0400000.pcie: iATU unroll: enabled
[ 0.659111] rockchip-dw-pcie 3c0400000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 0.865254] rockchip-dw-pcie 3c0400000.pcie: Link up
[ 0.865409] rockchip-dw-pcie 3c0400000.pcie: PCI host bridge to bus 0001:10
[ 0.865438] pci_bus 0001:10: root bus resource [bus 10-1f]
[ 0.865464] pci_bus 0001:10: root bus resource [io 0x100000-0x1fffff] (bus address [0xf2100000-0xf21fffff])
[ 0.865491] pci_bus 0001:10: root bus resource [mem 0xf2200000-0xf3ffffff]
[ 0.865514] pci_bus 0001:10: root bus resource [mem 0x340000000-0x37fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.865579] pci 0001:10:00.0: [1d87:3566] type 01 class 0x060400
[ 0.865626] pci 0001:10:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 0.865718] pci 0001:10:00.0: supports D1 D2
[ 0.865739] pci 0001:10:00.0: PME# supported from D0 D1 D3hot
[ 0.870595] pci 0001:10:00.0: Primary bus is hard wired to 0
[ 0.870627] pci 0001:10:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 0.870944] pci 0001:11:00.0: [10ec:8125] type 00 class 0x020000
[ 0.871051] pci 0001:11:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 0.871158] pci 0001:11:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 0.871235] pci 0001:11:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 0.871763] pci 0001:11:00.0: supports D1 D2
[ 0.871784] pci 0001:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.885601] pci_bus 0001:11: busn_res: [bus 11-1f] end is updated to 11
[ 0.885665] pci 0001:10:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
[ 0.885695] pci 0001:10:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
[ 0.885724] pci 0001:10:00.0: BAR 7: assigned [io 0x100000-0x100fff]
[ 0.885754] pci 0001:11:00.0: BAR 2: assigned [mem 0xf2200000-0xf220ffff 64bit]
[ 0.885825] pci 0001:11:00.0: BAR 4: assigned [mem 0xf2210000-0xf2213fff 64bit]
[ 0.885896] pci 0001:11:00.0: BAR 0: assigned [io 0x100000-0x1000ff]
[ 0.885935] pci 0001:10:00.0: PCI bridge to [bus 11]
[ 0.885956] pci 0001:10:00.0: bridge window [io 0x100000-0x100fff]
[ 0.885980] pci 0001:10:00.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.889166] pcieport 0001:10:00.0: PME: Signaling with IRQ 85
[ 0.889712] pcieport 0001:10:00.0: AER: enabled with IRQ 86
[ 0.891068] rockchip-dw-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[ 0.891134] rockchip-dw-pcie 3c0800000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[ 0.891184] rockchip-dw-pcie 3c0800000.pcie: MEM 0x00f0200000..0x00f1ffffff -> 0x00f0200000
[ 0.891221] rockchip-dw-pcie 3c0800000.pcie: MEM 0x0380000000..0x03bfffffff -> 0x0040000000
[ 0.904172] rockchip-dw-pcie 3c0800000.pcie: iATU unroll: enabled
[ 0.904199] rockchip-dw-pcie 3c0800000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 2.009421] rockchip-dw-pcie 3c0800000.pcie: Phy link never came up
[ 2.009598] rockchip-dw-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20
[ 2.009627] pci_bus 0002:20: root bus resource [bus 20-2f]
[ 2.009653] pci_bus 0002:20: root bus resource [io 0x200000-0x2fffff] (bus address [0xf0100000-0xf01fffff])
[ 2.009681] pci_bus 0002:20: root bus resource [mem 0xf0200000-0xf1ffffff]
[ 2.009704] pci_bus 0002:20: root bus resource [mem 0x380000000-0x3bfffffff] (bus address [0x40000000-0x7fffffff])
[ 2.009794] pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400
[ 2.009834] pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
[ 2.009864] pci 0002:20:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
[ 2.009891] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 2.009991] pci 0002:20:00.0: supports D1 D2
[ 2.010011] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[ 2.014696] pci 0002:20:00.0: Primary bus is hard wired to 0
[ 2.014728] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 2.019146] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[ 2.019206] pci 0002:20:00.0: BAR 0: assigned [mem 0x380000000-0x3bfffffff]
[ 2.019238] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000]
[ 2.019263] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000]
[ 2.019287] pci 0002:20:00.0: BAR 6: assigned [mem 0xf0200000-0xf020ffff pref]
[ 2.019317] pci 0002:20:00.0: PCI bridge to [bus 21]
[ 2.022541] pcieport 0002:20:00.0: PME: Signaling with IRQ 96
[ 2.023007] pcieport 0002:20:00.0: AER: enabled with IRQ 97
[ 2.029010] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.029061] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 2.031575] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.031611] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 2.032555] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active.
[ 2.032916] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[ 2.035122] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.039164] printk: console [ttyS2] disabled
[ 2.039259] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 44, base_baud = 1500000) is a 16550A
[ 2.190177] printk: console [ttyS2] enabled
[ 2.193170] random: crng init done
[ 2.194450] rockchip-vop2 fe040000.vop: Adding to iommu group 0
[ 2.199818] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff800008a08b00)
[ 2.200630] dwhdmi-rockchip fe0a0000.hdmi: [drm:dw_hdmi_rockchip_bind] ERROR Unable to parse OF data
[ 2.202556] panfrost fde60000.gpu: clock rate = 594000000
[ 2.203080] panfrost fde60000.gpu: bus_clock rate = 500000000
[ 2.204339] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.209064] loop: module loaded
[ 2.209421] mtip32xx Version 1.3.1
[ 2.209897] Loading iSCSI transport class v2.0-870.
[ 2.216047] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
[ 2.217118] rk_gmac-dwmac fe2a0000.ethernet: supply phy not found, using dummy regulator
[ 2.218180] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (output).
[ 2.218835] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c).
[ 2.219352] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f).
[ 2.219871] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[ 2.225493] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
[ 2.226251] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 2.226906] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5
[ 2.227375] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
[ 2.228049] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
[ 2.228718] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[ 2.229376] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[ 2.229957] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[ 2.230453] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.231173] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=8)
[ 2.231807] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[ 2.232350] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width
[ 2.329832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.330448] ehci-pci: EHCI PCI platform driver
[ 2.330919] ehci-platform: EHCI generic platform driver
[ 2.333706] ehci-platform fd800000.usb: EHCI Host Controller
[ 2.334250] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[ 2.335087] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000
[ 2.349223] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[ 2.350355] hub 1-0:1.0: USB hub found
[ 2.350746] hub 1-0:1.0: 1 port detected
[ 2.353981] ehci-platform fd880000.usb: EHCI Host Controller
[ 2.354520] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[ 2.355328] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000
[ 2.369226] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[ 2.370298] hub 2-0:1.0: USB hub found
[ 2.370684] hub 2-0:1.0: 1 port detected
[ 2.371804] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.372394] ohci-platform: OHCI generic platform driver
[ 2.373137] ohci-platform fd840000.usb: Generic Platform OHCI controller
[ 2.373803] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[ 2.374639] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000
[ 2.437735] hub 3-0:1.0: USB hub found
[ 2.438121] hub 3-0:1.0: 1 port detected
[ 2.439224] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[ 2.439849] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[ 2.440662] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000
[ 2.505716] hub 4-0:1.0: USB hub found
[ 2.506109] hub 4-0:1.0: 1 port detected
[ 2.507990] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.508513] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 2.509400] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 2.510309] xhci-hcd xhci-hcd.0.auto: irq 18, io mem 0xfcc00000
[ 2.511020] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.511531] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 2.512232] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.513388] hub 5-0:1.0: USB hub found
[ 2.513773] hub 5-0:1.0: 1 port detected
[ 2.514543] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.515771] hub 6-0:1.0: USB hub found
[ 2.516160] hub 6-0:1.0: 1 port detected
[ 2.517026] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.517573] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 2.518417] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 2.519313] xhci-hcd xhci-hcd.1.auto: irq 19, io mem 0xfd000000
[ 2.520021] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.520538] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 2.521262] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 2.522365] hub 7-0:1.0: USB hub found
[ 2.522749] hub 7-0:1.0: 1 port detected
[ 2.523520] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.524724] hub 8-0:1.0: USB hub found
[ 2.525107] hub 8-0:1.0: 1 port detected
[ 2.526014] usbcore: registered new interface driver usb-storage
[ 2.526900] i2c_dev: i2c /dev entries driver
[ 2.529318] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 2.531870] vdd_cpu: supplied by vcc5v0_sys
[ 2.537073] rk808 0-0020: chip id: 0x8090
[ 2.612406] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 2.613006] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 2.615668] vdd_logic: supplied by vcc3v3_sys
[ 2.621464] vdd_gpu: supplied by vcc3v3_sys
[ 2.626253] vcc_ddr: supplied by vcc3v3_sys
[ 2.631631] vdd_npu: supplied by vcc3v3_sys
[ 2.633076] vcc_1v8: supplied by vcc3v3_sys
[ 2.636446] vdda0v9_image: Bringing 600000uV into 950000-950000uV
[ 2.640330] vdda0v9_image: supplied by vcc3v3_sys
[ 2.641842] vdda_0v9: supplied by vcc3v3_sys
[ 2.646675] vdda0v9_pmu: supplied by vcc3v3_sys
[ 2.651070] vccio_acodec: Bringing 600000uV into 3300000-3300000uV
[ 2.654975] vccio_acodec: supplied by vcc3v3_sys
[ 2.657080] vccio_sd: supplied by vcc3v3_sys
[ 2.659072] vcc3v3_pmu: supplied by vcc3v3_sys
[ 2.663906] vcca_1v8: supplied by vcc3v3_sys
[ 2.668742] vcca1v8_pmu: supplied by vcc3v3_sys
[ 2.673145] vcca1v8_image: Bringing 600000uV into 1800000-1800000uV
[ 2.677069] vcca1v8_image: supplied by vcc3v3_sys
[ 2.678126] vcc_3v3: supplied by vcc3v3_sys
[ 2.680517] vcc3v3_sd: supplied by vcc3v3_sys
[ 2.688485] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[ 2.700569] rk808-rtc rk808-rtc: registered as rtc0
[ 2.703692] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:09 UTC (1501923609)
[ 2.707680] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
[ 2.714131] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
[ 2.715755] sdhci: Secure Digital Host Controller Interface driver
[ 2.716322] sdhci: Copyright(c) Pierre Ossman
[ 2.716719] Synopsys Designware Multimedia Card Interface Driver
[ 2.717774] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.718821] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[ 2.719514] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[ 2.720134] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[ 2.720737] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 35,32 bit host data width,256 deep fifo
[ 2.721917] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.722875] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 2.723555] hid: raw HID events driver (C) Jiri Kosina
[ 2.724111] usbcore: registered new interface driver usbhid
[ 2.724612] usbhid: USB HID core driver
[ 2.726563] NET: Registered PF_INET6 protocol family
[ 2.728072] Segment Routing with IPv6
[ 2.728449] In-situ OAM (IOAM) with IPv6
[ 2.728856] NET: Registered PF_PACKET protocol family
[ 2.729389] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.730693] 8021q: 802.1Q VLAN Support v1.8
[ 2.733746] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 2.750499] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[ 2.756075] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff800008a08b00)
[ 2.760552] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 2.761764] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 2.762651] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffff800008a0cc10)
[ 2.763503] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 2.764334] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 2.765322] panfrost fde60000.gpu: clock rate = 594000000
[ 2.765816] panfrost fde60000.gpu: bus_clock rate = 500000000
[ 2.769918] panfrost fde60000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
[ 2.770738] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
[ 2.771423] panfrost fde60000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400
[ 2.772143] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
[ 2.773220] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
[ 2.774582] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
[ 2.777231] usb 7-1: new full-speed USB device number 2 using xhci-hcd
[ 2.778117] Waiting for root device PARTUUID=54...
[ 2.847011] mmc1: new HS200 MMC card at address 0001
[ 2.847958] mmcblk1: mmc1:0001 A3A551 28.9 GiB
[ 2.849633] mmcblk1: p1 p2
[ 2.850289] mmcblk1boot0: mmc1:0001 A3A551 4.00 MiB
[ 2.851651] mmcblk1boot1: mmc1:0001 A3A551 4.00 MiB
[ 2.852794] mmcblk1rpmb: mmc1:0001 A3A551 16.0 MiB, chardev (245:0)
[ 2.860012] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.861327] Freeing unused kernel memory: 1792K
[ 2.873242] Run /sbin/init as init process
[ 2.873617] with arguments:
[ 2.873619] /sbin/init
[ 2.873621] with environment:
[ 2.873623] HOME=/
[ 2.873625] TERM=linux
[ 2.939647] input: Compx 2.4G Receiver as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.0/0003:25A7:FA64.0001/input/input1
[ 2.997586] hid-generic 0003:25A7:FA64.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-xhci-hcd.1.auto-1/input0
[ 3.003299] input: Compx 2.4G Receiver Mouse as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input2
[ 3.004592] input: Compx 2.4G Receiver as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input3
[ 3.005843] input: Compx 2.4G Receiver Consumer Control as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input4
[ 3.007416] init: Console is alive
[ 3.007889] init: - watchdog -
[ 3.069364] input: Compx 2.4G Receiver System Control as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input5
[ 3.070748] hid-generic 0003:25A7:FA64.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-xhci-hcd.1.auto-1/input1
[ 3.431046] kmodloader: loading kernel modules from /etc/modules-boot.d/
[ 3.528916] Key type encrypted registered
[ 3.536136] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 3.542687] raid6: skip pq benchmark and using algorithm neonx8
[ 3.543287] raid6: using neon recovery algorithm
[ 3.546586] xor: measuring software checksum speed
[ 3.549841] 8regs : 3541 MB/sec
[ 3.552513] 32regs : 4319 MB/sec
[ 3.555503] arm64_neon : 3834 MB/sec
[ 3.555893] xor: using function: 32regs (4319 MB/sec)
[ 3.632745] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 3.638016] fsl-ehci: Freescale EHCI Host controller driver
[ 3.642325] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.643819] init: - preinit -
[ 3.773296] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 4.023185] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[ 6.067462] loop0: detected capacity change from 0 to 60424192
[ 6.093211] loop0: detected capacity change from 60424192 to 60243200
[ 6.171432] F2FS-fs (loop0): Mounted with checkpoint version = 633d4409
[ 6.173360] mount_root: loading kmods from internal overlay
[ 6.196486] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 6.201404] usbcore: registered new interface driver uas
[ 6.202162] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 6.262580] block: attempting to load /etc/config/fstab
[ 6.265615] block: unable to load configuration (fstab: Entry not found)
[ 6.266268] block: no usable configuration
[ 6.267682] mount_root: switching to f2fs overlay
[ 6.375111] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null). Quota mode: none.
[ 6.390850] urandom-seed: Seeding with /etc/urandom.seed
[ 6.546824] procd: - early -
[ 6.547160] procd: - watchdog -
[ 7.103011] procd: - watchdog -
[ 7.109395] procd: - ubus -
[ 7.165151] procd: - init -
[ 7.661995] urngd: v1.0.2 started.
[ 7.760966] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.782688] NET: Registered PF_ALG protocol family
[ 7.790663] Key type dns_resolver registered
[ 7.797168] Key type cifs.idmap registered
[ 7.799702] NET: Registered PF_KEY protocol family
[ 7.801732] Initializing XFRM netlink socket
[ 7.815939] tun: Universal TUN/TAP device driver, 1.6
[ 7.829152] IPv4 over IPsec tunneling driver
[ 7.865844] cryptodev: driver 1.12 loaded.
[ 7.868725] GACT probability on
[ 7.870378] Mirror/redirect action on
[ 7.878742] u32 classifier
[ 7.879013] input device check on
[ 7.879340] Actions configured
[ 7.887997] Simple TC action Loaded
[ 7.899852] Bridge firewalling registered
[ 7.948196] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
[ 7.948816] r8125 2.5Gigabit Ethernet driver 9.011.00-NAPI-RSS loaded
[ 7.949511] r8125 0000:01:00.0: enabling device (0000 -> 0003)
[ 7.967018] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[ 7.967870] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Random ether addr se:cr:et:ma:ca
[ 7.969281] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 7.972323] r8125 Copyright (C) 2022 Realtek NIC software team [email protected]
[ 7.972323] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/.
[ 7.972323] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/.
[ 7.975254] r8125 2.5Gigabit Ethernet driver 9.011.00-NAPI-RSS loaded
[ 7.975883] r8125 0001:11:00.0: enabling device (0000 -> 0003)
[ 7.994045] r8125 0001:11:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[ 7.994897] r8125 0001:11:00.0 (unnamed net_device) (uninitialized): Random ether addr se:cr:et:ma:ca
[ 7.996264] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 7.999300] r8125 Copyright (C) 2022 Realtek NIC software team [email protected]
[ 7.999300] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/.
[ 7.999300] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/.
[ 8.003564] usbcore: registered new interface driver r8152
[ 8.009005] usbcore: registered new interface driver snd-usb-caiaq
[ 8.012988] usbcore: registered new interface driver ums-alauda
[ 8.014037] usbcore: registered new interface driver ums-cypress
[ 8.015069] usbcore: registered new interface driver ums-datafab
[ 8.016072] usbcore: registered new interface driver ums-freecom
[ 8.017094] usbcore: registered new interface driver ums-isd200
[ 8.018162] usbcore: registered new interface driver ums-jumpshot
[ 8.019165] usbcore: registered new interface driver ums-karma
[ 8.020231] usbcore: registered new interface driver ums-sddr09
[ 8.021303] usbcore: registered new interface driver ums-sddr55
[ 8.022369] usbcore: registered new interface driver ums-usbat
[ 8.026208] IPsec XFRM device driver
[ 8.046786] xt_time: kernel timezone is -0000
[ 8.049816] usbcore: registered new interface driver cdc_ether
[ 8.052023] usbcore: registered new interface driver cdc_ncm
[ 8.061707] PPP generic driver version 2.4.2
[ 8.063343] NET: Registered PF_PPPOX protocol family
[ 8.067184] usbcore: registered new interface driver snd-usb-audio
[ 8.069898] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.070607] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld [email protected]. All Rights Reserved.
[ 8.073434] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.272096] eth1: 0xffff80000a7a0000, se:cr:et:ma:ca, IRQ 0
[ 12.320478] br-lan: port 1(eth1) entered blocking state
[ 12.320969] br-lan: port 1(eth1) entered disabled state
[ 12.321857] device eth1 entered promiscuous mode
[ 12.356928] eth2: 0xffff80000a610000, a6:22:af:0f:f4:b4, IRQ 76
[ 12.405558] br-lan: port 2(eth2) entered blocking state
[ 12.406057] br-lan: port 2(eth2) entered disabled state
[ 12.406874] device eth2 entered promiscuous mode
[ 12.415154] rk_gmac-dwmac fe2a0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 12.513240] rk_gmac-dwmac fe2a0000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 12.521218] dwmac4: Master AXI performs any burst length
[ 12.521754] rk_gmac-dwmac fe2a0000.ethernet eth0: No Safety Features support found
[ 12.522470] rk_gmac-dwmac fe2a0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 12.523462] rk_gmac-dwmac fe2a0000.ethernet eth0: registered PTP clock
[ 12.524969] rk_gmac-dwmac fe2a0000.ethernet eth0: configuring for phy/rgmii link mode
[ 12.733277] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 12.754855] usb-storage 6-1:1.0: USB Mass Storage device detected
[ 12.755868] usb-storage 6-1:1.0: Quirks match for vid 152d pid 0567: 5000000
[ 12.756623] scsi host0: usb-storage 6-1:1.0
[ 13.789729] scsi 0:0:0:0: Direct-Access 4BAY H/W RAID5 5031 PQ: 0 ANSI: 6
[ 13.791397] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 13.792255] sd 0:0:0:0: [sda] 46883930112 512-byte logical blocks: (24.0 TB/21.8 TiB)
[ 13.792955] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 13.793876] sd 0:0:0:0: [sda] Write Protect is off
[ 13.794327] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
[ 13.795224] sd 0:0:0:0: [sda] Disabling FUA
[ 13.795623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.880984] sda: sda1 sda2
[ 13.883319] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.996989] r8125: eth2: link up
[ 14.997809] br-lan: port 2(eth2) entered blocking state
[ 14.998303] br-lan: port 2(eth2) entered forwarding state
[ 15.001929] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 15.616502] rk_gmac-dwmac fe2a0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 15.617438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.555096] overlayfs: filesystem on '/opt/docker/check-overlayfs-support2756741608/upper' not supported as upperdir

OpenWrt 23.05.0-rc1

Any chance if a OpenWrt 23.05.0-rc1 build?