GithubHelp home page GithubHelp logo

wgcf-socks5-proxy's Introduction

wgcf-docker

CloudFlare warp in docker

fork from: https://github.com/Neilpang/wgcf-docker

What improvements did I make:

  1. Limit the alpine version to 3.17 to avoid errors caused by version issues.
  2. Added socks5 proxy service

Run example:

docker run --rm -it \
     --name wgcf \
     --sysctl net.ipv6.conf.all.disable_ipv6=0 \
     --privileged --cap-add net_admin \
     -v /lib/modules:/lib/modules \
     -v $(pwd)/wgcf:/wgcf \
     -p 7889:1080 \
     activeliang/wgcf-socks5-proxy -6

Now you can use the socks proxy on the host machine:

curl --socks5 127.0.0.1:7889 -6 ip.p3terx.com

Configurable SOCKS5 Proxy with Environment Variables

This SOCKS5 proxy supports configuration through environment variables. You can customize the proxy settings using the following variables: USER, PASSWORD, PORT, and HOST. Authentication (auth) will only be enabled if both the USER and PASSWORD variables are provided.

Usage

To configure the SOCKS5 proxy, follow these steps:

  1. Set the following environment variables:

    • USER: The username for authentication (optional).
    • PASSWORD: The password for authentication (optional).
    • PORT: The port number for the proxy server (default: 1080).
    • HOST: The host address for the proxy server (default: 0.0.0.0).

    Note: Authentication will be enabled only if both the USER and PASSWORD variables are provided. If either one is missing, authentication will not be enabled.

  2. Start the SOCKS5 proxy using your preferred method, passing the environment variables as arguments.

    Example:

     PASSWORD=mypassword PORT=1080 HOST=0.0.0.0 start_proxy.sh
docker run --rm -it \
  --name wgcf \
  --sysctl net.ipv6.conf.all.disable_ipv6=0 \
  --privileged --cap-add net_admin \
  -v /lib/modules:/lib/modules \
  -v $(pwd)/wgcf:/wgcf \
  -p 7889:1080 \
  -e USER=myuser \
  -e PASSWORD=mypassword \
  -e PORT=1080 \
  -e HOST=0.0.0.0 \
  activeliang/wgcf-socks5-proxy -6

    This command will start the SOCKS5 proxy with the specified configuration.

  3. The SOCKS5 proxy will be accessible on the specified host and port. Authentication will be enforced only if both the USER and PASSWORD variables are provided.

That's it! You can now configure the SOCKS5 proxy using environment variables, with the option to enable authentication by providing both the USER and PASSWORD variables.

The following is the readme of the original project

  1. Run a single container:

docker run --rm -it \
    --name wgcf \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --privileged --cap-add net_admin \
    -v /lib/modules:/lib/modules \
    -v $(pwd)/wgcf:/wgcf \
    neilpang/wgcf-docker



The above command will enable both ipv4 and ipv6, you can enable ipv4 or ipv6 only like following:


#enable ipv4 only:



docker run --rm -it \
    --name wgcf \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --privileged --cap-add net_admin \
    -v /lib/modules:/lib/modules \
    -v $(pwd)/wgcf:/wgcf \
    neilpang/wgcf-docker  -4 



#enable ipv6 only:



docker run --rm -it \
    --name wgcf \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --privileged --cap-add net_admin \
    -v /lib/modules:/lib/modules \
    -v $(pwd)/wgcf:/wgcf \
    neilpang/wgcf-docker  -6

or:

docker run --rm -it \
    --name wgcf \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --privileged --cap-add net_admin \
    -v /lib/modules:/lib/modules \
    -v $(pwd)/wgcf:/wgcf \
    neilpang/wgcf-docker:alpine





The above command will enable both ipv4 and ipv6, you can enable ipv4 or ipv6 only like following:


#enable ipv4 only:


docker run --rm -it \
    --name wgcf \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --privileged --cap-add net_admin \
    -v /lib/modules:/lib/modules \
    -v $(pwd)/wgcf:/wgcf \
    neilpang/wgcf-docker:alpine  -4



#enable ipv6 only:


docker run --rm -it \
    --name wgcf \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --privileged --cap-add net_admin \
    -v /lib/modules:/lib/modules \
    -v $(pwd)/wgcf:/wgcf \
    neilpang/wgcf-docker:alpine  -6
  1. If aonther container needs to use the wgcf network, run it like:

docker run --rm  -it  --network container:wgcf  curlimages/curl curl ipinfo.io
  1. Docker-compose example:
Enable both ipv4 and ipv6 by default:


version: "2.4"
services:
  wgcf:
    image: neilpang/wgcf-docker:latest
    volumes:
      - ./wgcf:/wgcf
      - /lib/modules:/lib/modules
    privileged: true
    sysctls:
      net.ipv6.conf.all.disable_ipv6: 0
    cap_add:
      - NET_ADMIN
  

  test:
    image: curlimages/curl
    network_mode: "service:wgcf"
    depends_on:
      - wgcf
    command: curl ipinfo.io




Enable ipv6 only:

version: "2.4"
services:
  wgcf:
    image: neilpang/wgcf-docker:latest
    volumes:
      - ./wgcf:/wgcf
      - /lib/modules:/lib/modules
    privileged: true
    sysctls:
      net.ipv6.conf.all.disable_ipv6: 0
    cap_add:
      - NET_ADMIN
    command: "-6"
  

  test:
    image: curlimages/curl
    network_mode: "service:wgcf"
    depends_on:
      - wgcf
    command: curl ipv6.ip.sb





Enable ipv4 only:



version: "2.4"
services:
  wgcf:
    image: neilpang/wgcf-docker:latest
    volumes:
      - ./wgcf:/wgcf
      - /lib/modules:/lib/modules
    privileged: true
    sysctls:
      net.ipv6.conf.all.disable_ipv6: 0
    cap_add:
      - NET_ADMIN
    command: "-4"
  

  test:
    image: curlimages/curl
    network_mode: "service:wgcf"
    depends_on:
      - wgcf
    command: curl ipinfo.io

or:


Enable both ipv4 and ipv6 by default:



version: "2.4"
services:
  wgcf:
    image: neilpang/wgcf-docker:alpine
    volumes:
      - ./wgcf:/wgcf
      - /lib/modules:/lib/modules
    privileged: true
    sysctls:
      net.ipv6.conf.all.disable_ipv6: 0
    cap_add:
      - NET_ADMIN
  

  test:
    image: curlimages/curl
    network_mode: "service:wgcf"
    depends_on:
      - wgcf
    command: curl ipinfo.io

  
  





Enable ipv6 only:



version: "2.4"
services:
  wgcf:
    image: neilpang/wgcf-docker:alpine
    volumes:
      - ./wgcf:/wgcf
      - /lib/modules:/lib/modules
    privileged: true
    sysctls:
      net.ipv6.conf.all.disable_ipv6: 0
    cap_add:
      - NET_ADMIN
    command: "-6"
  

  test:
    image: curlimages/curl
    network_mode: "service:wgcf"
    depends_on:
      - wgcf
    command: curl ipv6.ip.sb






Enable ipv4 only:



version: "2.4"
services:
  wgcf:
    image: neilpang/wgcf-docker:alpine
    volumes:
      - ./wgcf:/wgcf
      - /lib/modules:/lib/modules
    privileged: true
    sysctls:
      net.ipv6.conf.all.disable_ipv6: 0
    cap_add:
      - NET_ADMIN
    command: "-4"
  

  test:
    image: curlimages/curl
    network_mode: "service:wgcf"
    depends_on:
      - wgcf
    command: curl ipinfo.io

wgcf-socks5-proxy's People

Contributors

neilpang avatar tzhao11 avatar activeliang avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.