My name is Arthur Rupp. I'm a software developer for different languages, for more than 30 years.
💬 For the past 10 years, I have been working with Smart Home and Building automation. iobroker is here my preferred system
fullyBrowser intergration in iobroker
License: MIT License
My name is Arthur Rupp. I'm a software developer for different languages, for more than 30 years.
💬 For the past 10 years, I have been working with Smart Home and Building automation. iobroker is here my preferred system
Hi using fullybrowser adapter now for some time and I recently? got errors using compact mode:
Source:
host.ioBroker.compactgroup1
Cannot start fullybrowser.0 in compact mode. Fallback to normal start! : ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.fullybrowser/node_modules/follow-redirects/index.
there is a prceding error without source
ndefined
Is that a know issue (even maybe for some time) and do you need more info to fix this?
PS: just updated fullybrowser today to version 2.0.2. I think the error appears since then.
kind regards
Dear Adapter developer,
with js-controller 3.2 and js-controller 3.3 some additional checks were added to make sure that created objects match to the specifications and also written state values match to the object definition.
If something is not correct this is logged as 'warning' or 'info' log.
Please take the time to verify your adapter by ideally starting with a fresh instance and do some actions and verify the log. If you see a warn log there from these checks please adjust the adapter and fix the relevant cases.
For questions please refer to ioBroker/ioBroker.js-controller#1301
Additionally we are preparing Admin 5 which will have a completely rewritten UI. Please install Admin 5, activate that new UI and verify that the configuration of you adapter works as expected also there.
More informations on Admin 5 can be found in Forum https://forum.iobroker.net/topic/44282/test-adapter-admin-5-0-x-alpha-der-neuen-ui
Please close the issue after you checked it.
Thank you very much for your support!
For what is "startApplication"?
How can I use this?
If i use this for the Sonos App:
intent:#Intent;launchFlags=0x10000000;component=com.sonos.acr/.SonosLaunchActivity;end
Nothing happens.
In ioBroker Vis it works.
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/arteck/ioBroker.fullybrowser
I have also found warnings that may be fixed if possible.
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
hey
is ist possible to make this object to a state? Now its just a Info, but i wanna change it .
E.g. which states will be available and description of most important.
I would like to control the volume from the tablet via the adapter, it looks like the fully app is already able to do so (rest api and js interface)
Is it possible to play a (notification) sound from a datapoint button? Similar to TextToSpeech.
Custom soundfiles or standard android notification sound would be nice.
Version: stable=1.0.3 (187 days old) => latest=1.0.4 (15 days old)
Installs: stable=901 (60.07%), latest=440 (29.33%), total=1500
Click to edit
Version: stable=1.0.0 (287 days old) => latest=1.0.3 (17 days old)
Installs: stable=519 (47.7%), latest=377 (34.65%), total=1088
Click to edit
I am using fully adapter 1.0.1 with JS Controller 2.0.38 on win10.
Since I updated from 2.0.33 to 2.0.38 the fully adapter has got problems with syncing data from the browser on tablet.
No datapoints are synchronized and the fully alive is False most of the time. Sometimes null.
Hallo,
wäre es möglich einen Datenpunkt zu schaffen, mit dem man die Seite vom Fully refreshen kann? In "Toolbars and Appearence" in den Einstellungen kann man eine Action Bar einstellen wo ein Refresh Button sichtbar wird. Wäre super wenn es den als Datenpunkt mit Tastendruck gebe ähnlich den anderen wie restart App.
Liebe Grüße
Since update to 2.06 I get permanent message 4807) updateDeviceERROR 192.168.x.xx
When roll previous version everything is OK
State "fullybrowser.0.info.connection" has no existing object, this might lead to an error in future versions
System data:
Platform: linux
Distribution: Debian GNU/Linux
Architecture: x64
Model: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
RAM: 4 GB
Node.js: v12.20.1
NPM: v6.14.10
JS-Controller (1): 3.2.7
Admin: 4.2.1
fullyBrowser: 2.0.2
created by ioBroker.info
Hallo
nach dem Update von 1.0.4 auf 2.0.0 aktualisieren sich die Daten nicht mehr, es gibt auch keine Fehlermeldung im Log
debug-log liefere ich nach
Hi,
I want to control my tablets screen brightness over fully. Is it possible, to add the cmd key "screenBrightness" to your Adapter?
Thank you.
Wenn ich in dem Datenpunkt loadURL eine IoBroker VIS URL manuell eingebe wird diese nicht geladen.
Das Problem ist das # Symbol.
http://ipadresse:8082/vis/index.html#Landing
Wird eine Adresse ohne # Symbol in der URL eingegeben, wird die Seite umgehend geladen.
(19387) State value to set for "fullybrowser.0.192_168_0_41.Info.sensorInfo" has to be stringified but received type "object"
Adapter v4.0.7
Ich habe meinen Server neu aufgesetzt. Er läuft nun mit Ubuntu 18.04 LTS, Nodejs V8.15.0
Nachdem ich von Github den Adapter geladen habe kam im Log diese Fehlermeldung:
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at Manager.Emitter.emit (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/component-emitter/index.js:133:20)
-- | -- | -- | --
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at Manager.<anonymous> (/opt/iobroker/node_modules/component-bind/index.js:21:15)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at Socket.onpacket (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:244:12)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at Socket.onack (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:319:9)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at Socket.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:787:25)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at createInstancesObjects (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:748:13)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at /opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:788:29
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at initAdapter (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:4989:62)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at Object.ready (/opt/iobroker/node_modules/iobroker.fullybrowser/main.js:31:9)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | at main (/opt/iobroker/node_modules/iobroker.fullybrowser/main.js:435:33)
fullybrowser.0 | 2018-12-29 14:40:19.057 | error | TypeError: Cannot read property 'length' of undefined
fullybrowser.0 | 2018-12-29 14:40:19.056 | error | uncaught exception: Cannot read property 'length' of undefined
Der Adapter an sich scheint zu laufen, es kommen Daten von FullyBwowser, alle Datenpunkte sind angelegt und werden aktualisiert.
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/arteck/ioBroker.fullybrowser
I have also found warnings that may be fixed if possible.
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Hallo,
ich habe das Problem, dass Dropdown-Listen im Popup (View) nicht nutzbar sind (lassen sich nicht öffnen und auswählen).
Ich habe so ziemlich alle verschiedenen Dropdown ausprobiert - im normalen Browser funktionieren sie jeweils, im FKB jedoch nicht...
der Switch der ebenfalls separat im popup noch da ist, funktioniert.
Hallo,
ich habe derzeit drei "fullyBrowser Installationen (plus)" welche ich mit einer ioBroker Instanz steuere.
Eine Installation davon (Android 8 basierter Spiegel) is meistens offline, also im standby. Solange das der Fall ist, erzeugt das dann jede Minute eine Meldung:
fullybrowser.0 | 2021-03-08 16:16:35.204 | warn | (32274) updateDeviceERROR 192.168.178.29
fullybrowser.0 | 2021-03-08 16:15:34.676 | warn | (32274) updateDeviceERROR 192.168.178.29
fullybrowser.0 | 2021-03-08 16:14:34.167 | warn | (32274) updateDeviceERROR 192.168.178.29
fullybrowser.0 | 2021-03-08 16:13:33.784 | warn | (32274) updateDeviceERROR 192.168.178.29
fullybrowser.0 | 2021-03-08 16:12:33.023 | warn | (32274) updateDeviceERROR 192.168.178.29
Ein Tablet (ebenfalls Android 8), erzeugt keine Meldung wenn es im Ruhezustand ist. Hat jemand eine Idee ob mann die Meldung ggf. unterdrücken oder ob es an unterschiedlichen Konfigurationen liegen kann?
Danke !
Hallo,
ich habe oft einen Update-Device Error in meinem Log, an was könnte das liegen?
fullybrowser.0 | 2021-09-09 13:54:05.817 | warn | updateDeviceERROR 192.168.178.45 |
---|---|---|---|
fullybrowser.0 | 2021-09-09 13:53:05.806 | warn | updateDeviceERROR 192.168.178.45 |
fullybrowser.0 | 2021-09-09 13:52:05.698 | warn | updateDeviceERROR 192.168.178.45 |
fullybrowser.0 | 2021-09-09 13:51:05.486 | warn | updateDeviceERROR 192.168.178.45 |
All github repos have the same prefix "ioBroker.".
The name of adapter must be lower case, because npm does not allow capital letters
ioBroker Admin 5.1.25
Node.js v14.17.6
NPM 6.14.15
State "fullybrowser.0.xxx_xxx_xxx_xx.Info.scopedStorage" has no existing object, this might lead to an error in future versions
State "fullybrowser.0.xxx_xxx_xxx_xx.Info.BSSID" has no existing object, this might lead to an error in future versions
If one update of fully values fails, update is stopped forever.
Restart of adapter instance is solving the problem.
... should be "hardware"!
Hi,
the new js-controller 2.0 will come into latest repository in the next days and we want to make sure that all adapters are working well. We already did a 2 weeks Beta test and so some adapter were aleady checked and some needed slight adjustments.
You can find more information in ioBroker/ioBroker.js-controller#482 and in the ioBroker Forum. If you have more technical questions please write in the referenced issue or in the Developer thread please. General questions are best in the genral thread.
Please update your systems to js-controller 2.0 and check your adapter.
Please close this issue once you have checked your adapter or received successfull reports from users.
Thank you very much for your support. Please contact us in the other Threads or Forum on any question.
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/arteck/ioBroker.fullybrowser
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Dear Adapter developer,
Node.js 14 is now available for a year and Node.js 16 was release just some days ago and will become LTS by October 2021. We plan to update the ioBroker Node.js recommendation (currently 12.x) to 14.x later this year.
Please check your adapter with Node.js 14 especially, and ideally also directly with Node.js 16
Please add both versions to the adapter testing which is executed on commits.
If your adapter requires a certain minimum version of Node.js please set the 'engine' setting in package.json accordingly! Please also do this if the adapter is not able to work in certain Node.js versions, so that ioBroker can prevent users from installing te adapter if not compatible!
On questions please talk to us at ioBroker/ioBroker.js-controller#1138
Please close the issue after you checked it.
Thank you very much for your support!
Version: stable=2.0.1 (118 days old) => latest=2.0.2 (15 days old)
Installs: stable=1619 (66.22%), latest=649 (26.54%), total=2445
Click to edit
Das Update auf 0.1.15 läuft ohne Fehler durch Adapter bleibt aber bei 0.1.13 bei mir.
Version: stable=1.0.0 (370 days old) => latest=1.0.3 (100 days old)
Installs: stable=610 (44.95%), latest=630 (46.43%), total=1357
Click to edit
Version: stable=1.0.0 (308 days old) => latest=1.0.3 (38 days old)
Installs: stable=539 (47.03%), latest=452 (39.44%), total=1146
Click to edit
Hi,
1.) Qualtät
Nutze ich die WEB-API direkt um einen Text sprachlich auszugeben ist die Qualität recht gut.
http://192.168.123.123:2323/?cmd=textToSpeech&text=%22Der%20externe%20Alarm%20wurde%20deaktiviert.%20Es%20gab%20einen%20verpassten%20Anruf.%22&locale=de_DE&password=strenggeheim&type=json
Verwende ich hingegen das iobroker Objekt
fullybrowser.0.192_168_123_123.Commands.textToSpeech
Und fülle es per copy/paste oder in JS ist der Beispieltext oben vor allem bei "...externe Alarm..."
nicht schön. Zu schnell/ungenau.
2.) Umlaute
Testweise habe ich den Parameter "&locale=de_DE" im WebAufruf entfernt => habe ich keinen Unterschied in der Qualität dazu festgestellt, als wenn ich ihn drinnen lasse. Ausgabe war gleich gut - macht nur bei Umlauten Schwierigkeiten.
=> Dieser Parameter sollte für die Umlaute mindestens also noch per Auswahl in den ioBroker Settings einstellbar sein und mitgegeben werden.
Gruß,
Fii
https://github.com/arteck/iobroker.fullyBrowser/blob/master/io-package.json#L13
All knows, that this is an Adapter :)
Hallo
wenn ich im Datenpunkt fullybrowser.0.xxx.xxx.xxx.xxx.Commands.textToSpeech einen Text eingebe, kommt keine Sprachausgabe am Tablet auf dem der Fullykioskbrowser läuft, mach ich da etwas verkehrt???
Hi.
Erstmal danke für den coolen Adapter.
Leider stehen bei mir unter "info" nur 2 states: error
Please login
Login ist aber korrekt, da ich den auch im Browser korrekt verwenden kann und mir da alle States angezeigt werden.
Woran kann das liegen?
Vielen Dank vorab
The upcoming version 2.0.0 of js-controller will support a new mode for low memory devices. For this, a few minor adjustments to the adapter must be made. Please follow these instructions: https://forum.iobroker.net/viewtopic.php?f=24&t=20387#p213466
Hallo,
ich würde es sehr begrüßen, wenn (weitere) get Befehle implementiert werden würden.
Speziell benötige ich die aktuelle Audio Volume, damit ich vor dem setzen der Audio Volume die bisherige Volume abfragen und speichern kann.
Laut Handbuch von Fully kann dies mit "void fully.getAudioVolume(int streamType) // ver. 1.27+" umgesetzt werden.
Weiterhin sehe ich "fully.getStringSetting(String key)" als sinnvoll an.
Vielen Dank im Voraus.
Daniel
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/arteck/ioBroker.fullybrowser
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Wenn ich in dem Datenpunkt loadURL eine IoBroker VIS URL manuell eingebe wird diese nicht geladen.
Das Problem ist das # Symbol.
http://ipadresse:8082/vis/index.html#Landing
Wird eine Adresse ohne # Symbol in der URL eingegeben, wird die Seite umgehend geladen.
Muss das issue leider nochmal aufmachen,
habe gerade genau, das angesprochene Problem.
Wie kann ich es Lösen?
Gruß
Originally posted by @BassT23 in #8 (comment)
EDIT:
Adapter per Git auf 1.0.3 Aktualisiert. -> Funktioniert jetzt
I am an automatic service from ioBroker that searches adapters and makes suggestions.
I noticed that your adapter is not integrated in the ioBroker.discovery. Using the Discovery adapter, ioBroker can automatically find devices or suggest services to the user for installation. If possible I would live to see your adapter added there.
Some adapters have already been added and you can use them as blueprints. See: https://github.com/ioBroker/ioBroker.discovery You need to fork this project and then create a PR for your adapter to be added.
Basically the plugins can do HTTP calls, UDP discovery, MDNS, UPNP and will iterate over all devices found by IP scan and check local serial ports. If you want you can also add new discovery methods but please try to do that with at least dependencies as possible.
Then create one file under lib/adapters for your adapter to implement the detection and proposal of an instance to the user.
On questions, the other developers will support in the forum or via GitHub issues too.
If no detection is possible, simply close this issue and I won't bother you again. ;-)
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
HI,
ich wollte mal anfragen ob angedacht ist die Display Helligkeit auch über den Adapter steuerbar zu machen?
Hallo;
Ich habe seit einiger Zeit diese Log Einträge:
fullybrowser.0 | 2021-05-12 20:14:32.327 | warn | (16540) updateDeviceERROR 192.168.1.50 |
---|---|---|---|
fullybrowser.0 | 2021-05-12 20:14:10.316 | warn | (16540) updateDeviceERROR 192.168.1.50 |
fullybrowser.0 | 2021-05-12 20:14:09.261 | warn | (16540) Generate State problem 192_168_1_50 {"message":"timeout of 2000ms exceeded","name":"Error","stack":"Error: timeout of 2000ms exceeded\n at createError (/opt/iobroker/node_modules/axios |
Was hat das mit dem "generate state problem" auf sich?
Version: stable=2.0.8 (84 days old) => latest=2.0.9 (15 days old)
Installs: stable=1956 (62.59%), latest=576 (18.43%), total=3125
Click to edit
after the update from 2.0.4 to 2.0.6, a connection to the tablet is no longer possible. the data point "isFullyAlive" is false and "updateDeviceERROR" appears in the log file.
after a downgrade to 2.0.4 everything works again.
To fill this text and other in the future use provided translations link.
https://github.com/arteck/iobroker.fullyBrowser/blob/master/io-package.json#L10
No on('message') handler found in main.js.
There is no need to declare messagebox=true
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.