baby636 / wifsolvercuda

Tool for solving misspelled or damaged Bitcoin Private Key in Wallet Import Format (WIF)

WifSolverCuda

Tool for solving misspelled or damaged Bitcoin Private Key in Wallet Import Format (WIF)

Usage:

WifSolverCuda [-d deviceId] [-b NbBlocks] [-t NbThreads] [-s NbThreadChecks]
     [-fresultp reportFile] [-fresult resultFile] [-fstatus statusFile] [-a targetAddress]
     -stride hexKeyStride -rangeStart hexKeyStart [-rangeEnd hexKeyEnd] [-checksum hexChecksum] 
     -wifStart wifKeyStart [-wifEnd wifKeyEnd]
     [-decode wifToDecode]
     [-restore statusFile]
     [-listDevices] 
     [-disable-um]
     [-v]
     [-h]

 -rangeStart hexKeyStart: decoded initial key with compression flag and checksum
 -rangeEnd hexKeyEnd:     decoded end key with compression flag and checksum (optional)
 -wifStart wifKeyStart:   initial key (WIF)
 -wifEnd wifKeyEnd:       end key (WIF) (optional)
 -stride hexKeyStride:    full stride calculated as 58^(most-right missing char index)
 -checksum hexChecksum:   decoded checksum, cannot be modified with a stride
 -a targetAddress:        expected address
 -fresult resultFile:     file for final result (default: result.txt)
 -fresultp reportFile:    file for each WIF with correct checksum (default: result_partial.txt)
 -fstatus statusFile:     file for periodically saved status (default: fileStatus.txt)
 -fstatusIntv seconds:    period between status file updates (default 60 sec)
 -d deviceId:             default 0
 -c :                     search for compressed address
 -u :                     search for uncompressed address (default)     
 -b NbBlocks:             default processorCount * 8
 -t NbThreads:            default deviceMax/8 * 5
 -s NbThreadChecks:       default 3364
 -decode wifToDecode:     decodes given WIF
 -restore statusFile:     restore work configuration
 -listDevices:            shows available devices
 -disable-um:             disable unified memory mode
 -v :                     verbose output
 -h :                     shows help

Program could search for given address or search for any valid WIF with a given configuration.

How to use it

In my examples I will use WIF 5KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKSmnqY which produces address 19NzcPZvZMSNQk8sDbSiyjeKpEVpaS1212 The expected private key is: c59cb0997ad73f7bf8621b1955caf80b304ded0a48e5b8f28c7b8f9356ec35e5

Let's assume we have WIF with 5 missing characters 5KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK?????KKKSmnqY We must replace unknown characters by minimal characters from base58 encoding, to produce our starting key. WIF 5KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK11111KKKSmnqY could be decoded to: 80c59cb0997ad73f7bf8621b1955caf80b304ded0a48e5b8f28c7b89f466ff5f68e2677283

In our calculations we need full decoded value, not only private key part. The same way we may calculate maximum (end of range) for key processing - replacing unknown characters with 'z'.

Another important step is to calculate stride. Each change of unknown characters has impact on decoded value. In our case the first missing character is on 9th position from right side, so our stride is 58^8 = 7479027ea100

We may launch program with parameters:

-stride 7479027ea100 -u -rangeStart 80c59cb0997ad73f7bf8621b1955caf80b304ded0a48e5b8f28c7b89f466ff5f68e2677283  -a 19NzcPZvZMSNQk8sDbSiyjeKpEVpaS1212

Solver for described example is based on fact that stride modifies decoded checksum. Program verifies checksum (2*sha256) and only valid WIFs are checked agains expected address (pubkey->hashes->address).

Similar test for compressed WIF (target KzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzWK7YY3s):

-stride 7479027ea100 -c -rangeStart 8070cfa0d40309798a5bd144a396478b5b5ae3305b7413601b18767654f1108a02787692623a  -a 1PzaLTZS3J3HqGfsa8Z2jfkCT1QpSMVunD

For other of examples please see the file /docs/examples.txt. It is also possible to use parameters -wifStart and -wifEnd for defining ranges.

-stride 7479027ea100 -u -wifStart 5KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK11111KKKSmnqY -a 19NzcPZvZMSNQk8sDbSiyjeKpEVpaS1212

or test for compressed, with start&end ranges:

-c -wifStart L5KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK1111111KKKJsczi8wg -stride 15ac264554f032800 -wifEnd L5KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKzzzzzzzKKKJsczi8wg -a 1M9JqAMbCBwtvNLedwNG4TjiPsxATJrvxq

Program supports legacy addresses (1...), native Segwit/bench32 P2WPKH (bc1...) and P2WPKH-P2SH addresses (3...).

Build

Windows:

Program was prepared using CUDA 11.6 - for any other version manual change in VS project config files is needed. Exe under /Releases/ was build using compute_cap=86, for cards 30xx. If you have older card, you must rebuild program using older CUDA/lower CCAP.

Linux:

Go to WifSolverCuda/ subfolder and execute make all. If your device does not support compute capability=86 (error "No kernel image is available for execution on the device"), do the change in Makefile (for example 1080Ti requires COMPUTE_CAP=61).

Performance

User should modify number of blocks and number of threads in each block to find values which are the best for his card. Number of tests performed by each thread also could have impact of global performance/latency.

Test card: RTX3060 (eGPU!) with 224 BLOCKS & 640 BLOCK_THREADS (program default values) checks around 10000 MKey/s for compressed address with missing characters in the middle (collision with checksum) and around 1400 Mkey/s for missing beginning (20000steps/thread); other results (using default values of blocks, threads and steps per thread):

card	perf Mkey/s, missing beginning
RTX 3060 eGPU	1400 (224/512/20000)
RTX 3070	2200 (414/640/5000)
RTX 3090	3950 (656/640/5000)
RTX 3080TI	4000 (640/640/5000)
RTX A6000	4000 (588/640/5000)
GTX 1070	950 (135/768/5000)

Please consult official Nvidia Occupancy Calculator (https://docs.nvidia.com/cuda/cuda-occupancy-calculator/index.html) to see how to select desired amount of threads/block (shared memory=0, registers per thread = 48). Adjust number of steps per thread to obtain the optimal performance.

TODO

• code cleaning, review of hash functions
• predefined custom step (using list of possible characters)
• auto-processing (preparing configuration) based on WIF

Contact

Contact email: [email protected] If you found this program useful, consider making a donation, I will appreciate it! BTC: bc1qz2akvlch75rqdfg8pv7chqvz3m8jsl49k0kszc