badgerwithagun / victron-hacs

Home Assistant plug-in for Victron Instant Readout compatible devices

Victron Instant Readout Integration

This integration allows exposing data from Victron devices with Instant Readout enabled in Home Assistant.

Supported Devices & Entities:

• SmartShunt 500A/500mv and BMV-712/702 provide the following data:
  • Voltage
  • Alarm status
  • Current
  • Remaining time (mins)
  • State of charge (%)
  • Consumed amp hours
  • Auxilary input mode and value (temperature, midpoint voltage, or starter battery voltage)
• Smart Battery Sense
  • Voltage
  • Temperature (°C)
• MPPT/Solar Charger
  • Charger State (Off, Bulk, Absorption, Float)
  • Battery Voltage (V)
  • Battery Charging Current (A)
  • Solar Power (W)
  • Yield Today (Wh)
  • External Device Load (A)
• Inverter
  • Device State (Off, Inverting)
  • Battery Voltage (V)
  • AC Voltage (V)
  • AC Current (A)
  • AC Apparent Power (VA)
• VE.Bus Adapter (works with Multiplus Inverters)
  • Device State (Off, Inverting)
  • Battery Voltage (V)
  • Battery Current (A)
  • Battery Temperature (°C)
  • Battery State of Charge (%)
  • AC Input State (AC_IN_1, AC_IN_2, NOT_CONNECTED)
  • AC Input Power (W)
  • AC Output Power (W)

Installation

Manual

1. Clone the repository to your machine and copy the contents of custom_components/ to your config directory
2. Restart Home Assistant
3. Setup integration via the integration page.

HACS

1. Add the integration through this link:
2. Restart Home Assistant
3. Setup integration via the integration page.