Vibe
Publically published Sep 4, 2018
Vibe is a tool designed to perform post-ex lateral movement techniques while remaining undetected by network detection tools including Threat Hunting appliances. Vibe works by pulling down all information about a domain, allowing users to perform the same domain net commands offline. Vibe also enumerates additional information that is not typically shown in these queries. Vibe also provides the ability to scan systems to see what shares available and what privileges the account, has access to. Vibe also provides the ability to enumerate users currently logged into systems, as well as who has been logged in, while remaining undetected.
Installation
Vibe was developed with Python version 2.7 3.0
Tested and supported on Kali Linux and Ubuntu.
Vibe uses the following external dependencies:
- python-ldap
- ldap3
- pandas
- tabulate
- impacket
- netaddr
To install run following commands:
sudo apt-get install libsasl2-dev python3-dev libldap2-dev libssl-dev
pip3 install -r requirements.txt
Usage
~/Vibe# python3 ./vibe.py -h
usage: main [-h] -U username [-P password] -D domain -I IP [-o] [-r] [-p PORT] [-u]
optional arguments:
-h, --help show this help message and exit
-U username, --username username
Username
-P password, --password password
Password
-D domain, --domain domain
Fully Qualified Domain Name
-I IP, --ip IP IP address of Domain Controller
-o, --offline Offline Mode
-r, --remove Remove Database
-p PORT, --port PORT Specify a specific port to connect on (default is 636)
-u, --unencrypted Specify a specific for unencrypted mode (if LDAPS is not available)
root@kali:~/# ./vibe.py -U admin -P Password! -D STARLABS.local -I 172.16.144.185
___ ___ ___ ________ _______
|\ \ / /||\ \ |\ __ \ |\ ____\
\ \ \ / / /\ \ \ \ \ \|\ /_ \ \ \_____
\ \ \/ / / \ \ \ \ \ __ \ \ \ ____\
\ \ / / \ \ \ \ \ \|\ \ \ \ \____
\ \__/ / \ \__\ \ \_______\ \ \______\
\|__|/ \|__| \|_______| \|______|
(@Tyl0us)
[+] Credentials valid, generating database
[+] Table 1/5 : Generating User Table
[+] Table 2/5 : Generating Group Table
[+] Table 3/5 : Generating Computer Table
[+] Table 4/5 : Generating Password Policy Table
[+] Table 5/5 : Generating SPN Table
[+] Database successfully created
[*] 0.11863517761230469
>>help
Commands
========
clear Clears the screen
help Displays this help menu
list Lists either all Users, Computers, or Groups. Use the -f option to pipe the contents to a file
session Scans target(s) to see who has/is currently logged in. Can take a list or range of hosts, using -t/--target and specify a user using -d/--domain, -u/--user, -p/--password and --jitter/-j to add a delay. Requires: read/write privileges on either Admin$ or C$ share
net Perform a query to view all information pertaining to a specific user, group, or computer (Similar to the Windows net user, net group commands). example: 'net group Domain Admins'
columns Displays the column names in each of the three major tables (users, groups and computers
query Executes a query on the contents of tables
search Searches for a key word(s) through every field of every table for any matches, displaying row
share_hunter Scans target(s) enumerating the shares on the target(s) and the level of access the specified user, using -d/--domain, -u/--user, -p/--password. Can take a list or range of hosts, using -t/--target and --jitter/-j to add a delay
show Shows the contents of Users, Computers, Credentials, Groups, Password policy, Store, Credentials, Files Servers and Access tables
store Displays the contents of a specific table. Example: 'show [table name] (access, creds, computers, file servers, pwdpolicy, users)
export Export the contents of the database to a path in one of the following formats: csv, html. (using with -f or --filetype and -p or --path for the file path)
exit Exit Vibe
>>
Domain Information Quering
The show command displays the contents of a table, specific information across all tables or the available modules, using the following syntax:
>>show users
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| Username | Home Directory | SID | Password Last Set | Last Logged On | Account Settings | Member Of |
+================+========================+=======+=====================+=====================+====================+========================================+
| Administrator | | 500 | 2017-11-28 16:40:56 | 2017-11-28 16:35:48 | DONT_EXPIRE_PASSWD | Domain Users |
| | | | | | NORMAL_ACCOUNT | WseInvisibleToDashboard |
| | | | | | ACCOUNT_DISABLED | Group Policy Creator Owners |
| | | | | | | Domain Admins |
| | | | | | | Enterprise Admins |
| | | | | | | Schema Admins |
| | | | | | | Administrators |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| Guest | | 501 | 1600-12-31 19:03:58 | 1600-12-31 19:03:58 | DONT_EXPIRE_PASSWD | Domain Guests |
| | | | | | PASSWD_NOTREQD | Guests |
| | | | | | NORMAL_ACCOUNT | |
| | | | | | ACCOUNT_DISABLED | |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| DefaultAccount | | 503 | 1600-12-31 19:03:58 | 1600-12-31 19:03:58 | DONT_EXPIRE_PASSWD | Domain Users |
| | | | | | PASSWD_NOTREQD | System Managed Accounts Group |
| | | | | | NORMAL_ACCOUNT | |
| | | | | | ACCOUNT_DISABLED | |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| Admin | | 1000 | 2017-11-28 16:40:24 | 2018-08-24 13:01:20 | DONT_EXPIRE_PASSWD | Domain Users |
| | | | | | NORMAL_ACCOUNT | Domain Admins |
| | | | | | | Administrators |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| krbtgt | | 502 | 2017-11-28 16:44:43 | 1600-12-31 19:03:58 | NORMAL_ACCOUNT | Domain Users |
| | | | | | ACCOUNT_DISABLED | Denied RODC Password Replication Group |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| ballen | \\\\SLServer01\\ballen | 1123 | 2017-11-28 17:40:08 | 2018-08-09 17:56:50 | DONT_EXPIRE_PASSWD | Domain Users |
| | | | | | NORMAL_ACCOUNT | SL_R&D |
| | | | | | | SL_Scientist |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| cramon | \\\\SLFS02\\cramon | 1125 | 2018-05-29 13:07:32 | 2018-08-23 21:47:26 | NORMAL_ACCOUNT | Domain Users |
| | | | | | | SL_R&D |
| | | | | | | SL_HelpDesk |
| | | | | | | Domain Admins |
| | | | | | | Enterprise Admins |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| hwells | | 1126 | 2017-11-28 17:51:51 | 2018-08-23 21:46:21 | DONT_EXPIRE_PASSWD | Domain Users |
| | | | | | NORMAL_ACCOUNT | SLServ01_Admin |
| | | | | | | SL_R&D |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| ssmith | | 2104 | 2018-08-09 20:54:14 | 2018-08-09 20:47:47 | NORMAL_ACCOUNT | Domain Users |
| | | | | | | SL_HR |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| csnow | \\\\SLFS01\\csnow | 2105 | 2018-08-09 19:35:05 | 2018-08-23 20:53:35 | NORMAL_ACCOUNT | Domain Users |
| | | | | | | SL_R&D |
| | | | | | | SL_Scientist |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| wwest | | 2608 | 2018-08-09 20:58:39 | 1600-12-31 19:03:58 | NORMAL_ACCOUNT | Domain Users |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
| iwallen | | 2610 | 2018-05-16 22:49:37 | 1600-12-31 19:03:58 | NORMAL_ACCOUNT | Domain Users |
+----------------+------------------------+-------+---------------------+---------------------+--------------------+----------------------------------------+
There are several different options that can be used with the show command includiong:
- access
- computers
- creds
- fgpolicy (only accessible if an account that has admin access to the domain contoller is used, on inital start up)
- file servers
- groups
- pwdpolicy
- store
- spn
- users
Below are some examples of the information stored:
>>show access admin
+----------------+------------------------+--------------+
| Computer | Share | Permission |
+================+========================+==============+
| 172.16.144.185 | ADMIN$ | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | C$ | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | CertEnroll | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | Company | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | File History Backups | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | Folder Redirection | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | NETLOGON | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | Shared Folders | Read |
+----------------+------------------------+--------------+
| 172.16.144.185 | SYSVOL | Read |
+----------------+------------------------+--------------+
| 172.16.144.185 | test | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | UpdateServicesPackages | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | Users | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | WsusContent | Read\Write |
+----------------+------------------------+--------------+
| 172.16.144.185 | WSUSTemp | Read\Write |
+----------------+------------------------+--------------+
>>show file servers
File Servers Discovered
----------
SLSERVER01
SLFS02
SLFS01
----------
>>show pwdpolicy
Password Policy
---------------
Minimum Password Length: 7
Lockout Threshold: 5
Lockout Duration: 30.0 minutes
Passwords Remembered: 24
Password Properties: 1 DOMAIN_PASSWORD_COMPLEX
>>
The query command can be used to display a unique set of data based on the parememters specificed. The query command uses sql syntax.
The columns command to display the column names in each of the three major tables. This can help focus queries made with the query command.
>>columns user
[-] Displaying the columns in the User Table
['Username', 'Description', 'Home Directory', 'Password Last Set', 'Last Logged On', 'Account Settings', 'Primary Group Name', 'Member Of']
>>columns group
[-] Displaying the columns in the Group Table
['Name', 'SID', 'Description', 'Member Of', 'Members']
>>columns computer
[-] Displaying the columns in the Computer Table
['Name', 'Description', 'Operating System', 'Operating System Version Number', 'Member Of']
>>
The net command can also be used simillar to the windows command line arguements net user, net group and net computer.
>>net group Domain Admins
Group name: Domain Admins
Description: Designated administrators of the domain
Group Membership:
WseRemoteAccessUsers WseAlertAdministrators WseAllowHomePageLinks
WseAllowDashboardAccess WseAllowAddInAccess WseAllowMediaAccess
WseAllowComputerAccess WseAllowShareAccess WseRemoteWebAccessUsers
Denied RODC Password Replication GroupAdministrators
----------------------------------------------------------------------------------
Members:
cramon Admin Administrator
>>
Search
The search <key word(s)> command looks for a key word(s) through every field of every table for any matches, displaying all the information about that object it was discovered in.
>>search SLServer
Groups
---------
+----------------+-------+-------------------------------+-------------+------------+
| Name | SID | Description | Member Of | Members |
+================+=======+===============================+=============+============+
| SLServ01_Admin | 2609 | Admin Group for SLServer01... | | SLSERVER01 |
| | | | | hwells |
+----------------+-------+-------------------------------+-------------+------------+
Users
---------
+------------+---------------+------------------------+-------+----------------------+---------------------+---------------------+--------------------+--------------+
| Username | Description | Home Directory | SID | Profile Path | Password Last Set | Last Logged On | Account Settings | Member Of |
+============+===============+========================+=======+======================+=====================+=====================+====================+==============+
| ballen | CEO... | \\\\SLServer01\\ballen | 1123 | \\SLServer01\\ballen | 2017-11-28 17:40:08 | 2018-08-09 17:56:50 | DONT_EXPIRE_PASSWD | Domain Users |
| | | | | | | | NORMAL_ACCOUNT | SL_R&D |
| | | | | | | | | SL_Scientist |
+------------+---------------+------------------------+-------+----------------------+---------------------+---------------------+--------------------+--------------+
Computers
---------
+------------+---------------+--------------------------------+-----------------------------------+----------------+
| Name | Description | Operating System | Operating System Version Number | Member Of |
+============+===============+================================+===================================+================+
| SLSERVER01 | | Windows Server 2016 Essentials | 10.0 (14393) | SLServ01_Admin |
+------------+---------------+--------------------------------+-----------------------------------+----------------+
>>
Share_Hunter
The share_hunter command scans the remote host(s) or ranges (using the -t or --targets option) discovering all available shares, as well as the level of access the specified user has (using the -d or --domain for the name of the domain, -u or --user the user's username, p or --password the user's password). The -j or --jitter option can be used to add a delay in between requests. This information can get stored and can be viewed using the show access <username>.
>>share_hunter -t 172.16.144.185-172.16.144.190 -d starlabs.local --user admin --password Password! -j 2
172.16.144.186
-----------------
[+] ADMIN$: Read\Write
[+] C$: Read\Write
172.16.144.185
-----------------
[+] ADMIN$: Read\Write
[+] C$: Read\Write
[+] CertEnroll: Read\Write
[+] Company: Read\Write
[+] File History Backups: Read\Write
[+] Folder Redirection: Read\Write
[+] NETLOGON: Read\Write
[*] Shared Folders: Read
[*] SYSVOL: Read
[+] test: Read\Write
[+] UpdateServicesPackages: Read\Write
[+] Users: Read\Write
[+] WsusContent: Read\Write
[+] WSUSTemp: Read\Write
172.16.144.189
-----------------
[+] ADMIN$: Read\Write
[+] C$: Read\Write
172.16.144.187
-----------------
[*] Host either not accessible or port 445 closed
172.16.144.188
-----------------
[+] ADMIN$: Read\Write
[+] C$: Read\Write
172.16.144.190
-----------------
[+] ADMIN$: Read\Write
[+] C$: Read\Write
Session
The session command scans the remote host(s) or ranges (using the -t or --targets option) discovering all active users, as well as who has had a profile generated on the remote system. This command requires the specified user (using the -d or --domain for the name of the domain, -u or --user the user's username, p or --password the user's password) has read/write privileges on either Admin$ or C$ share. The -j or --jitter option can be used to a add delay in between requests. This information can get stored and can be viewed using the show access <username>.
>>session -u admin --domain starlabs.local -p Password! -j 2 --targets SLServer01 --jitter 2
SLServer01
-----------------
Currently Logged On
-------------------
[+] STARLABS\hwells
[+] STARLABS\admin
Users Who Have Logged On
-------------------------
[*] admin lastlogon: Tue Feb 6 21:11:46 2018
[*] Administrator lastlogon: Tue Feb 6 20:40:54 2018
[*] cramon lastlogon: Thu Mar 1 21:00:58 2018
[*] hwells lastlogon: Wed Mar 28 23:44:30 2018
List
The list commmand displays either all users, computers, or groups. Use the -f option to pipe the output of the command to a file.
>>list users -f /tmp/users
--------------
Administrator
Guest
DefaultAccount
Admin
krbtgt
ballen
cramon
hwells
csnow
ssmith
wwest
iwestallen
--------------
Export
The Export command allows the contents of the user, groups, computer to be exported into either an HTML or CSV document, using either -f or filetype option. This command also requires a full path to save the files to, using the -p or path options.
>>export -p /tmp/ -f html
[+] File Saving to: /tmp//STARLABS.local_Users.html
[+] File Saving to: /tmp//STARLABS.local_Groups.html
[+] File Saving to: /tmp//STARLABS.local_Computers.html
>>export --path /tmp/ --filetype csv
[+] File Saving to: /tmp//STARLABS.local_Users.csv
[+] File Saving to: /tmp//STARLABS.local_Groups.csv
[+] File Saving to: /tmp//STARLABS.local_Computers.csv
>>
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent