bikemike / mikesthermostat Goto Github PK

Good day!
Is this a finished project?
I also want to make friends with these thermostats with my smart home using the MQTT protocol.
But why in your code are the protocol settings commented out?
And I did not find where to specify ssid wi-fi and password.
I would be grateful if you help))

Dear comrades, help with the equipment is required.

The wires were soldered to the board to the rx-tx connectors
ground is also connected to USB-TTL
power is used externally, and soldered to the legs of the ESP.

GPIO hooked to 0

When turned on, the microcontroller does not enter the firmware mode.
One gets the feeling that the internal communication is decoupled on the same rx-tx ports to which it is connected.

I ask for help with the firmware.
I did not check the option with full soldering of the ESP module with a hairdryer, and I would not like it, because there is a great chance of damage to the display.

Board version c17_6.0

Which raises questions:
I connect to port monitoring, on speed 9600

and I get a strange answer: Some of the data is readable, some are not. there is a feeling that the port is transmitting data to a neighboring microcircuit.

screenshot
https://dl.dropboxusercontent.com/s/hxyf1ud335lyxin/javaw_2020-09-03_01-24-34.png

Thanks for reply

When i flash the firmware to my thermostat i got no AP and im unable to get it working inside my wifi. Do i need to type my wifi credentials somewhere?

Hi Mike, I am trying to connect "MoesHouse thermostat" to my own android application and I am curious if you have some source so i can solve my problem? I searched for custom firmware to flash thermostat but didn't found anything useful because I have no idea how to control thermostat's custom LCD display.

Hi,
I would like to ask if time on thermostat being updated after power recovery, and if reports reley status on mqtt!

Thank u!

Hi, could any of you provide the compiled firmware for c17gh3?